Re: [PATCH REPOST] Extend PCIE_BUS_PEER2PEER to set MRSS=128 to fix CNS3xxx BM DMA.

[Bjorn Helgaas]

On Mon, Mar 21, 2016 at 10:39:52AM +0100, Krzysztof Halasa wrote:
> I think this bug needs to be fixed, this way or another.
> 
> The platform in question is Cavium CNS3xxx, ARMv6.
> 
> A recent patch by Arnd Bergmann (498a92d42596 "ARM: cns3xxx: pci: avoid
> potential stack overflow") converted an explicit setting of
> PCI_EXP_DEVCTL_READRQ = 0 (i.e., max 128 bytes for bus-mastering PCIe DMA
> read request) to:
> +    pcie_bus_config = PCIE_BUS_PEER2PEER;

Any thoughts on this, Arnd?  I can (and will) look at this, but it's
a complicated area and it will take me quite a while to dig into it.

> with the following commentary:
>     "The second part is how the driver sets up the Max_Read_Request_Size
>     value for the first device/function on bus 1, i.e. the device
>     plugged directly into the PCIe root port.
>     For all I can tell, this is in fact incomplete, as it does not
>     perform the same setting on devices attached to a PCIe switch,
>     or multi-function devices.
>     The solution for this part fortunately is even easier: if we
>     just set the global pcie_bus_config variable to PCIE_BUS_PEER2PEER,
>     all PCIe devices in the system are limited to 128 byte MPS, which
>     in turn limits the MRRS to 128 bytes for all devices, and we
>     no longer even need to touch any devices."
> 
> The problem is the MRRS setting is never written to the hardware.
> I propose the following, though I'm not sure if we can do this safely,
> especially given the comments in probe.c. OTOH, this change may be
> required in other (all?) cases when the user requests
> PCIE_BUS_PEER2PEER.
> 
> On this Laguna GW-2388 the following patch fixes BM DMA with:
> 0000:00:00.0 PCI bridge: Cavium Networks Device 3400 (rev 01)
> 0000:01:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
> 0000:02:0e.0 (PCI devices behind the bridge, these are doing actual BM xfers)
> 0001:00:00.0 PCI bridge: Cavium Networks Device 3400 (rev 01 - this is
> 	     the second lane from the CPU)
> 
> pci 0000:00:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
> pci 0000:01:00.0: Max Payload Size set to  128/ 512 (was  128), Max Read Rq  128
> pci 0001:00:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
> 
> Signed-off-by: Krzysztof HaÅasa <khalasa@xxxxxxx>
> Fixes: 498a92d42596 ("ARM: cns3xxx: pci: avoid potential stack overflow")
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 6d7ab9b..91713b6 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1919,7 +1919,8 @@ static void pcie_write_mrrs(struct pci_dev *dev)
>  	/* In the "safe" case, do not configure the MRRS.  There appear to be
>  	 * issues with setting MRRS to 0 on a number of devices.
>  	 */
> -	if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
> +	if (pcie_bus_config != PCIE_BUS_PERFORMANCE &&
> +	    pcie_bus_config != PCIE_BUS_PEER2PEER)
>  		return;
>  
>  	/* For Max performance, the MRRS must be set to the largest supported
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 2771625..6f5088a 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -756,7 +756,7 @@ enum pcie_bus_config_types {
>  	PCIE_BUS_DEFAULT,	/* ensure MPS matches upstream bridge */
>  	PCIE_BUS_SAFE,		/* use largest MPS boot-time devices support */
>  	PCIE_BUS_PERFORMANCE,	/* use MPS and MRRS for best performance */
> -	PCIE_BUS_PEER2PEER,	/* set MPS = 128 for all devices */
> +	PCIE_BUS_PEER2PEER,	/* set MPS and MRSS to 128 for all devices */
>  };
>  
>  extern enum pcie_bus_config_types pcie_bus_config;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html