[PATCH v4 2/3] Documentation: DT: vdma: Add clock support for dmas

From: Kedareswara rao Appana
Date: Fri Apr 22 2016 - 02:14:15 EST


This patch updates the binding doc with clock description
for AXI DMA's.

Acked-by: SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
---
Changes for v4:
---> None.
Changes for v3:
---> Added clock support for all the AXI DMA's.
Changes for v2:
--> Listed down all the clocks supported by the h/w
as suggested by the Datta.
--> Used IP clock names instead of shortcut clock name

.../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index fcc2b65..a1f2683 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -21,6 +21,18 @@ Required properties:
- dma-channel child node: Should have at least one channel and can have up to
two channels per device. This node specifies the properties of each
DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+ For VDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+ For CDMA:
+ Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+ FOR AXIDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axi_sg_aclk"

Required properties for VDMA:
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -60,6 +72,9 @@ axi_vdma_0: axivdma@40030000 {
xlnx,num-fstores = <0x8>;
xlnx,flush-fsync = <0x1>;
xlnx,addrwidth = <0x20>;
+ clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+ clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
dma-channel@40030000 {
compatible = "xlnx,axi-vdma-mm2s-channel";
interrupts = < 0 54 4 >;
--
2.1.2