[tip:x86/boot] x86/KASLR: Update description for decompressor worst case size

[tip-bot for Baoquan He]

Commit-ID:  4252db10559fc3d1efc1e43613254fdd220b014b
Gitweb:     http://git.kernel.org/tip/4252db10559fc3d1efc1e43613254fdd220b014b
Author:     Baoquan He <bhe@xxxxxxxxxx>
AuthorDate: Wed, 20 Apr 2016 13:55:42 -0700
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Fri, 22 Apr 2016 10:00:50 +0200

x86/KASLR: Update description for decompressor worst case size

The comment that describes the analysis for the size of the decompressor
code only took gzip into account (there are currently 6 other decompressors
that could be used). The actual z_extract_offset calculation in code was
already handling the correct maximum size, but this documentation hadn't
been updated. This updates the documentation, fixes several typos, moves
the comment to header.S, updates references, and adds a note at the end
of the decompressor include list to remind us about updating the comment
in the future.

(Instead of moving the comment to mkpiggy.c, where the calculation
is currently happening, it is being moved to header.S because
the calculations in mkpiggy.c will be removed in favor of header.S
calculations in a following patch, and it seemed like overkill to move
the giant comment twice, especially when there's already reference to
z_extract_offset in header.S.)

Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
[ Rewrote changelog, cleaned up comment style, moved comments around. ]
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andrey Ryabinin <aryabinin@xxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: H.J. Lu <hjl.tools@xxxxxxxxx>
Cc: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Yinghai Lu <yinghai@xxxxxxxxxx>
Link: http://lkml.kernel.org/r/1461185746-8017-2-git-send-email-keescook@xxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/boot/compressed/kaslr.c |  2 +-
 arch/x86/boot/compressed/misc.c  | 89 ++++------------------------------------
 arch/x86/boot/header.S           | 88 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+), 82 deletions(-)

diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index 9c29e78..7d86c5d 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -155,7 +155,7 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
 
 	/*
 	 * Avoid the region that is unsafe to overlap during
-	 * decompression (see calculations at top of misc.c).
+	 * decompression (see calculations in ../header.S).
 	 */
 	unsafe_len = (output_size >> 12) + 32768 + 18;
 	unsafe = (unsigned long)input + input_size - unsafe_len;
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index ad8c01a..e96829b 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -14,90 +14,13 @@
 #include "misc.h"
 #include "../string.h"
 
-/* WARNING!!
- * This code is compiled with -fPIC and it is relocated dynamically
- * at run time, but no relocation processing is performed.
- * This means that it is not safe to place pointers in static structures.
- */
-
 /*
- * Getting to provable safe in place decompression is hard.
- * Worst case behaviours need to be analyzed.
- * Background information:
- *
- * The file layout is:
- *    magic[2]
- *    method[1]
- *    flags[1]
- *    timestamp[4]
- *    extraflags[1]
- *    os[1]
- *    compressed data blocks[N]
- *    crc[4] orig_len[4]
- *
- * resulting in 18 bytes of non compressed data overhead.
- *
- * Files divided into blocks
- * 1 bit (last block flag)
- * 2 bits (block type)
- *
- * 1 block occurs every 32K -1 bytes or when there 50% compression
- * has been achieved. The smallest block type encoding is always used.
- *
- * stored:
- *    32 bits length in bytes.
- *
- * fixed:
- *    magic fixed tree.
- *    symbols.
- *
- * dynamic:
- *    dynamic tree encoding.
- *    symbols.
- *
- *
- * The buffer for decompression in place is the length of the
- * uncompressed data, plus a small amount extra to keep the algorithm safe.
- * The compressed data is placed at the end of the buffer.  The output
- * pointer is placed at the start of the buffer and the input pointer
- * is placed where the compressed data starts.  Problems will occur
- * when the output pointer overruns the input pointer.
- *
- * The output pointer can only overrun the input pointer if the input
- * pointer is moving faster than the output pointer.  A condition only
- * triggered by data whose compressed form is larger than the uncompressed
- * form.
- *
- * The worst case at the block level is a growth of the compressed data
- * of 5 bytes per 32767 bytes.
- *
- * The worst case internal to a compressed block is very hard to figure.
- * The worst case can at least be boundined by having one bit that represents
- * 32764 bytes and then all of the rest of the bytes representing the very
- * very last byte.
- *
- * All of which is enough to compute an amount of extra data that is required
- * to be safe.  To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient.  To avoind problems internal to a
- * block adding an extra 32767 bytes (the worst case uncompressed block size)
- * is sufficient, to ensure that in the worst case the decompressed data for
- * block will stop the byte before the compressed data for a block begins.
- * To avoid problems with the compressed data's meta information an extra 18
- * bytes are needed.  Leading to the formula:
- *
- * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
- *
- * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
- * Adding 32768 instead of 32767 just makes for round numbers.
- * Adding the decompressor_size is necessary as it musht live after all
- * of the data as well.  Last I measured the decompressor is about 14K.
- * 10K of actual data and 4K of bss.
- *
+ * WARNING!!
+ * This code is compiled with -fPIC and it is relocated dynamically at
+ * run time, but no relocation processing is performed. This means that
+ * it is not safe to place pointers in static structures.
  */
 
-/*
- * gzip declarations
- */
 #define STATIC		static
 
 #undef memcpy
@@ -148,6 +71,10 @@ static int lines, cols;
 #ifdef CONFIG_KERNEL_LZ4
 #include "../../../../lib/decompress_unlz4.c"
 #endif
+/*
+ * NOTE: When adding a new decompressor, please update the analysis in
+ * ../header.S.
+ */
 
 static void scroll(void)
 {
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 6236b9e..fd85b9e 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -440,6 +440,94 @@ setup_data:		.quad 0			# 64-bit physical pointer to
 
 pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 
+#
+# Getting to provably safe in-place decompression is hard. Worst case
+# behaviours need to be analyzed. Here let's take the decompression of
+# a gzip-compressed kernel as example, to illustrate it:
+#
+# The file layout of gzip compressed kernel is:
+#
+#    magic[2]
+#    method[1]
+#    flags[1]
+#    timestamp[4]
+#    extraflags[1]
+#    os[1]
+#    compressed data blocks[N]
+#    crc[4] orig_len[4]
+#
+# ... resulting in +18 bytes overhead of uncompressed data.
+#
+# (For more information, please refer to RFC 1951 and RFC 1952.)
+#
+# Files divided into blocks
+# 1 bit (last block flag)
+# 2 bits (block type)
+#
+# 1 block occurs every 32K -1 bytes or when there 50% compression
+# has been achieved. The smallest block type encoding is always used.
+#
+# stored:
+#    32 bits length in bytes.
+#
+# fixed:
+#    magic fixed tree.
+#    symbols.
+#
+# dynamic:
+#    dynamic tree encoding.
+#    symbols.
+#
+#
+# The buffer for decompression in place is the length of the uncompressed
+# data, plus a small amount extra to keep the algorithm safe. The
+# compressed data is placed at the end of the buffer.  The output pointer
+# is placed at the start of the buffer and the input pointer is placed
+# where the compressed data starts. Problems will occur when the output
+# pointer overruns the input pointer.
+#
+# The output pointer can only overrun the input pointer if the input
+# pointer is moving faster than the output pointer.  A condition only
+# triggered by data whose compressed form is larger than the uncompressed
+# form.
+#
+# The worst case at the block level is a growth of the compressed data
+# of 5 bytes per 32767 bytes.
+#
+# The worst case internal to a compressed block is very hard to figure.
+# The worst case can at least be bounded by having one bit that represents
+# 32764 bytes and then all of the rest of the bytes representing the very
+# very last byte.
+#
+# All of which is enough to compute an amount of extra data that is required
+# to be safe.  To avoid problems at the block level allocating 5 extra bytes
+# per 32767 bytes of data is sufficient.  To avoid problems internal to a
+# block adding an extra 32767 bytes (the worst case uncompressed block size)
+# is sufficient, to ensure that in the worst case the decompressed data for
+# block will stop the byte before the compressed data for a block begins.
+# To avoid problems with the compressed data's meta information an extra 18
+# bytes are needed.  Leading to the formula:
+#
+# extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size
+#
+# Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
+# Adding 32768 instead of 32767 just makes for round numbers.
+# Adding the decompressor_size is necessary as it musht live after all
+# of the data as well.  Last I measured the decompressor is about 14K.
+# 10K of actual data and 4K of bss.
+#
+# Above analysis is for decompressing gzip compressed kernel only. Up to
+# now 6 different decompressor are supported all together. And among them
+# xz stores data in chunks and has maximum chunk of 64K. Hence safety
+# margin should be updated to cover all decompressors so that we don't
+# need to deal with each of them separately. Please check
+# the description in lib/decompressor_xxx.c for specific information.
+#
+# extra_bytes = (uncompressed_size >> 12) + 65536 + 128
+#
+# Note that this calculation, which results in z_extract_offset (below),
+# is currently generated in compressed/mkpiggy.c
+
 #define ZO_INIT_SIZE	(ZO__end - ZO_startup_32 + ZO_z_extract_offset)
 #define VO_INIT_SIZE	(VO__end - VO__text)
 #if ZO_INIT_SIZE > VO_INIT_SIZE