Re: [PATCH v1 00/23] ata: sata_dwc_460ex: make it working again

[Christian Lamparter]

On Friday, April 22, 2016 06:50:44 AM Julian Margetson wrote:
> On 4/21/2016 4:25 PM, Christian Lamparter wrote:
> > On Thursday, April 21, 2016 09:15:21 PM Andy Shevchenko wrote:
> >> The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
> >> DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
> >> Besides that we expecting new board support coming with the same SATA IP but
> >> with different DMA.
> >>
> >> The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
> >> boards. In any case I ask Christian, Måns, and Julian to independently test and
> >> provide Tested-by tag or error report.
> > I did a test run on my WD MyBook Live. I applied all the patches in
> > this series on top of the topic/dw branch of Vinod Koul:
> > <https://git.kernel.org/cgit/linux/kernel/git/vkoul/slave-dma.git/>
> >
> > Tested-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
> > ---
> > results for my old ST3808110AS HDD. filesystem is ext4.
> >
> > # hdparm -t /dev/sda
> >
> > /dev/sda:
> >   Timing buffered disk reads: 204 MB in  3.02 seconds =  67.51 MB/sec
> >
> > # bonnie++ -u mbl
> > Using uid:1000, gid:1000.
> > Writing a byte at a time...done
> > Writing intelligently...done
> > Rewriting...done
> > Reading a byte at a time...done
> > Reading intelligently...done
> > start 'em...done...done...done...done...done...
> > Create files in sequential order...done.
> > Stat files in sequential order...done.
> > Delete files in sequential order...done.
> > Create files in random order...done.
> > Stat files in random order...done.
> > Delete files in random order...done.
> > Version  1.97       ------Sequential Output------ --Sequential Input- --Random-
> > Concurrency   1     -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
> > Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
> > mbl            496M    98  99 26011  21 17589  20   538  99 80138  39 208.9   8
> > Latency             95267us    1409ms     295ms   26947us    9644us    1787ms
> > Version  1.97       ------Sequential Create------ --------Random Create--------
> > mbl                 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
> >                files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
> >                   16  6959  78 +++++ +++  5197  40  7250  79 +++++ +++  4718  37
> > Latency               149ms    6742us     212ms     177ms     767us     217ms
> > 1.97,1.97,mbl,1,1461269771,496M,,98,99,26011,21,17589,20,538,99,80138,39,208.9,8,16,,,,,6959,78,+++++,+++,5197,40,7250,79,+++++,+++,4718,37,95267us,1409ms,295ms,26947us,9644us,1787ms,149ms,6742us,212ms,177ms,767us,217ms
> >
> Again on copy partitions .

Ok, here's the copy from my mail off-list.

Well, a unrelated driver "m41t80" caused a crash:
[   12.912739] Oops: Kernel access of bad area, sig: 11 [#3]
[   12.912743] PREEMPT Canyonlands
[   12.912753] CPU: 0 PID: 1413 Comm: irq/45-m41t80 Tainted: G      D         4.6.0-rc4-next-20160421-sam460ex-jm #1
[   12.912757] task: ea9834e0 ti: eea6c000 task.ti: eea6c000
[   12.912760] NIP: c0224480 LR: c0023494 CTR: c0042508
[   12.912764] REGS: eea6daf0 TRAP: 0300   Tainted: G      D          (4.6.0-rc4-next-20160421-sam460ex-jm)
[   12.912774] MSR: 00029000 <CE,EE,ME>  CR: 24008282  XER: 00000000
[   12.912825] DEAR: 00000008 ESR: 00000000 
[...]
[   12.912927] --- interrupt: 300 at mutex_lock+0x0/0x1c
[   12.912927]     LR = m41t80_handle_irq+0x28/0xac
[   12.912932] [eea6de40] [00000000]   (null) (unreliable)
[   12.912938] [eea6de60] [c004ffac] irq_thread_fn+0x2c/0x48
[   12.912944] [eea6de80] [c00501cc] irq_thread+0xc4/0x160
[   12.912951] [eea6ded0] [c003a3f8] kthread+0xc8/0xcc
[   12.912957] [eea6df40] [c000aee8] ret_from_kernel_thread+0x5c/0x64
[   12.912960] Instruction dump:
[   12.912974] 80010014 7fc3f378 bbc10008 7c0803a6 38210010 4be24ca8 9421ffd0 7c0802a6 
[   12.912987] bf210014 90010034 3b4302d8 812302ec <83890008> 812302d8 7f9a4840 419e011c 
[   12.912995] Fixing recursive fault but reboot is needed!
                 ^^^ "reboot is needed!"

Another thing that came to my mind: Have you checked if your hard drive
and the cables are ok? Are there any pending sectors or suspicious smart
values? Has the drive passed the extended offline test?
 
Otherwise, I can't reproduce the error with my MyBook system. I've tested
your kernel and it worked on the device without crashing. (I copied/dd'ed
80GB from and back to the hard-drive. It was long and boring, but I didn't
encounter any issues and the crc32 matched).

Sorry, but I can't help you if I can't reproduce it... And short of sending
your box to test, I see no efficient way to debug it. However, what I can
do, if you are interested: I have a few "build your own" My Book Live kits.
It just needs a 3.5" hard-drive and 12v power adapter. If you are interested
PM me off-list, this way you can verify that the kernels you build do work,
just in case this error is due to a hardware issue (zapped controller, 
bad ram/drive/cable?) with your sam460ex box.

Regards,
Christian