Re: [PATCH v1 00/23] ata: sata_dwc_460ex: make it working again

[Julian Margetson]

On 4/23/2016 3:41 PM, Christian Lamparter wrote:
> On Saturday, April 23, 2016 11:44:09 AM Julian Margetson wrote:
> > On 4/23/2016 8:02 AM, Julian Margetson wrote:
> > > On 4/22/2016 7:06 AM, Christian Lamparter wrote:
> > > > On Friday, April 22, 2016 06:50:44 AM Julian Margetson wrote:
> > > > > On 4/21/2016 4:25 PM, Christian Lamparter wrote:
> > > > > > On Thursday, April 21, 2016 09:15:21 PM Andy Shevchenko wrote:
> > > > > > > The last approach in the commit 8b3444852a2b ("sata_dwc_460ex:
> > > > > > > move to generic
> > > > > > > DMA driver") to switch to generic DMA engine API wasn't tested on
> > > > > > > bare metal.
> > > > > > > Besides that we expecting new board support coming with the same
> > > > > > > SATA IP but
> > > > > > > with different DMA.
> > > > > > >
> > > > > > > The driver has been tested myself on Sam460ex and WD MyBookLive
> > > > > > > (apollo3g)
> > > > > > > boards. In any case I ask Christian, Måns, and Julian to
> > > > > > > independently test and
> > > > > > > provide Tested-by tag or error report.
> > > > > > I did a test run on my WD MyBook Live. I applied all the patches in
> > > > > > this series on top of the topic/dw branch of Vinod Koul:
> > > > > > <https://git.kernel.org/cgit/linux/kernel/git/vkoul/slave-dma.git/>
> > > > > >
> > > > > > Tested-by: Christian Lamparter<chunkeey@xxxxxxxxxxxxxx>
> > > > > > ---
> > > > > > results for my old ST3808110AS HDD. filesystem is ext4.
> > > > > >
> > > > > > # hdparm -t /dev/sda
> > > > > >
> > > > > > /dev/sda:
> > > > > >     Timing buffered disk reads: 204 MB in  3.02 seconds = 67.51 MB/sec
> > > > > >
> > > > > > # bonnie++ -u mbl
> > > > > > Using uid:1000, gid:1000.
> > > > > > Writing a byte at a time...done
> > > > > > Writing intelligently...done
> > > > > > Rewriting...done
> > > > > > Reading a byte at a time...done
> > > > > > Reading intelligently...done
> > > > > > start 'em...done...done...done...done...done...
> > > > > > Create files in sequential order...done.
> > > > > > Stat files in sequential order...done.
> > > > > > Delete files in sequential order...done.
> > > > > > Create files in random order...done.
> > > > > > Stat files in random order...done.
> > > > > > Delete files in random order...done.
> > > > > > Version  1.97       ------Sequential Output------ --Sequential
> > > > > > Input- --Random-
> > > > > > Concurrency   1     -Per Chr- --Block-- -Rewrite- -Per Chr-
> > > > > > --Block-- --Seeks--
> > > > > > Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec
> > > > > > %CP  /sec %CP
> > > > > > mbl            496M    98  99 26011  21 17589  20   538  99 80138
> > > > > > 39 208.9   8
> > > > > > Latency             95267us    1409ms     295ms   26947us 9644us
> > > > > > 1787ms
> > > > > > Version  1.97       ------Sequential Create------ --------Random
> > > > > > Create--------
> > > > > > mbl                 -Create-- --Read--- -Delete-- -Create--
> > > > > > --Read--- -Delete--
> > > > > >                  files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec
> > > > > > %CP  /sec %CP
> > > > > >                     16  6959  78 +++++ +++  5197  40  7250 79 +++++
> > > > > > +++  4718  37
> > > > > > Latency               149ms    6742us     212ms 177ms     767us
> > > > > > 217ms
> > > > > > 1.97,1.97,mbl,1,1461269771,496M,,98,99,26011,21,17589,20,538,99,80138,39,208.9,8,16,,,,,6959,78,+++++,+++,5197,40,7250,79,+++++,+++,4718,37,95267us,1409ms,295ms,26947us,9644us,1787ms,149ms,6742us,212ms,177ms,767us,217ms
> > > > > Again on copy partitions .
> > > > Ok, here's the copy from my mail off-list.
> > > >
> > > > Well, a unrelated driver "m41t80" caused a crash:
> > > > [   12.912739] Oops: Kernel access of bad area, sig: 11 [#3]
> > > > [   12.912743] PREEMPT Canyonlands
> > > > [   12.912753] CPU: 0 PID: 1413 Comm: irq/45-m41t80 Tainted: G
> > > > D         4.6.0-rc4-next-20160421-sam460ex-jm #1
> > > > [   12.912757] task: ea9834e0 ti: eea6c000 task.ti: eea6c000
> > > > [   12.912760] NIP: c0224480 LR: c0023494 CTR: c0042508
> > > > [   12.912764] REGS: eea6daf0 TRAP: 0300   Tainted: G D
> > > > (4.6.0-rc4-next-20160421-sam460ex-jm)
> > > > [   12.912774] MSR: 00029000 <CE,EE,ME>  CR: 24008282 XER: 00000000
> > > > [   12.912825] DEAR: 00000008 ESR: 00000000
> > > > [...]
> > > > [   12.912927] --- interrupt: 300 at mutex_lock+0x0/0x1c
> > > > [   12.912927]     LR = m41t80_handle_irq+0x28/0xac
> > > > [   12.912932] [eea6de40] [00000000]   (null) (unreliable)
> > > > [   12.912938] [eea6de60] [c004ffac] irq_thread_fn+0x2c/0x48
> > > > [   12.912944] [eea6de80] [c00501cc] irq_thread+0xc4/0x160
> > > > [   12.912951] [eea6ded0] [c003a3f8] kthread+0xc8/0xcc
> > > > [   12.912957] [eea6df40] [c000aee8] ret_from_kernel_thread+0x5c/0x64
> > > > [   12.912960] Instruction dump:
> > > > [   12.912974] 80010014 7fc3f378 bbc10008 7c0803a6 38210010 4be24ca8
> > > > 9421ffd0 7c0802a6
> > > > [   12.912987] bf210014 90010034 3b4302d8 812302ec <83890008>
> > > > 812302d8 7f9a4840 419e011c
> > > > [   12.912995] Fixing recursive fault but reboot is needed!
> > > >                    ^^^ "reboot is needed!"
> > > >
> > > > Another thing that came to my mind: Have you checked if your hard drive
> > > > and the cables are ok? Are there any pending sectors or suspicious smart
> > > > values? Has the drive passed the extended offline test?
> > > >    Otherwise, I can't reproduce the error with my MyBook system. I've
> > > > tested
> > > > your kernel and it worked on the device without crashing. (I
> > > > copied/dd'ed
> > > > 80GB from and back to the hard-drive. It was long and boring, but I
> > > > didn't
> > > > encounter any issues and the crc32 matched).
> > > >
> > > > Sorry, but I can't help you if I can't reproduce it... And short of
> > > > sending
> > > > your box to test, I see no efficient way to debug it. However, what I
> > > > can
> > > > do, if you are interested: I have a few "build your own" My Book Live
> > > > kits.
> > > > It just needs a 3.5" hard-drive and 12v power adapter. If you are
> > > > interested
> > > > PM me off-list, this way you can verify that the kernels you build do
> > > > work,
> > > > just in case this error is due to a hardware issue (zapped controller,
> > > > bad ram/drive/cable?) with your sam460ex box.
> > > >
> > > > Regards,
> > > > Christian
> > > My Hardware seems ok.
> > > I have swapped cables and drives between the SII3512 pci controller
> > > and the DWC controller.
> > > No issues when connected to the SII3512 pci controller .
> > > The DWC controller works ok under AmigaOS 4.1FE so that does not
> > > appear to be a problem.
> > >
> > > Regards
> > > Julian
> > Test with kernel compiled with no other sata controllers included.
> > Freshly formatted harddrive  with one ntfs partition. MS-DOs partition
> > table.
> > Booted from USB thumb drive.
> > Keyboard and mouse freeze as soon as gparted is run.
> Well, then. Have you checked for any errata for the sam460ex?
> There's a known errata for the 460EX, with the CPU lockup upon
> high AHB traffic:
> <http://lists.denx.de/pipermail/u-boot/2008-June/036078.html>
>
> "This patch implements a fix provided by AMCC so that the lockup upon
> simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
> anymore:..."
>
> This should be fixed by u-boot. However, there's no telling if
> there's more to this workaround in the dma engine. You could try
> to do the testing without anything connected to the USB ports
> and disable/remove all usb hcds modules. As for fixing this:
> I did a quick search but couldn't find any public information.
> There's always support@xxxxxxx (contact them!), or maybe someone
> from the Amiga community knows more?

Tested with kernel with all USB disabled.
No sata error messages during the partition copy  but the copying is 
quite slow .
so this does appear to be the problem .

Regards
Julian