[PATCH v6 03/10] regulator: fixed: add device binding for platform device

[Lu Baolu]

This is needed to handle the GPIO connected USB vcc pin found on
Intel Baytrail devices.

Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
---
 drivers/regulator/fixed.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index ff62d69..e6f376f 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -209,12 +209,19 @@ static const struct of_device_id fixed_of_match[] = {
 MODULE_DEVICE_TABLE(of, fixed_of_match);
 #endif
 
+static const struct platform_device_id fixed_platform_ids[] = {
+	{ .name = "reg-fixed-voltage", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, fixed_platform_ids);
+
 static struct platform_driver regulator_fixed_voltage_driver = {
 	.probe		= reg_fixed_voltage_probe,
 	.driver		= {
 		.name		= "reg-fixed-voltage",
 		.of_match_table = of_match_ptr(fixed_of_match),
 	},
+	.id_table = fixed_platform_ids,
 };
 
 static int __init regulator_fixed_voltage_init(void)
-- 
2.1.4