Re: [PATCH] ARM64: dts: rockchip: add core dtsi file for RK3399 SoCs
From: Marc Zyngier
Date: Mon Apr 25 2016 - 08:04:44 EST
On 25/04/16 12:50, Huang, Tao wrote:
> Hi, Marc:
> On 2016å04æ25æ 18:39, Marc Zyngier wrote:
>> On 25/04/16 11:06, Marc Zyngier wrote:
>>> On 25/04/16 10:48, Huang, Tao wrote:
>>>> Hi, Marc:
>>>> On 2016å04æ21æ 19:30, Marc Zyngier wrote:
>>>>> On Thu, 21 Apr 2016 18:47:20 +0800
>>>>> "Huang, Tao" <huangtao@xxxxxxxxxxxxxx> wrote:
>>>>>
>>>>>> Hi, Mark:
>>>>>> On 2016å04æ21æ 18:19, Mark Rutland wrote:
>>>>>>> On Thu, Apr 21, 2016 at 11:58:12AM +0800, Jianqun Xu wrote:
>>>>>>>> + cpu_l0: cpu@0 {
>>>>>>>> + device_type = "cpu";
>>>>>>>> + compatible = "arm,cortex-a53", "arm,armv8";
>>>>>>>> + reg = <0x0 0x0>;
>>>>>>>> + enable-method = "psci";
>>>>>>>> + #cooling-cells = <2>; /* min followed by max */
>>>>>>>> + clocks = <&cru ARMCLKL>;
>>>>>>>> + };
>>>>>>>> + cpu_b0: cpu@100 {
>>>>>>>> + device_type = "cpu";
>>>>>>>> + compatible = "arm,cortex-a72", "arm,armv8";
>>>>>>>> + reg = <0x0 0x100>;
>>>>>>>> + enable-method = "psci";
>>>>>>>> + #cooling-cells = <2>; /* min followed by max */
>>>>>>>> + clocks = <&cru ARMCLKB>;
>>>>>>>> + };
>>>>>>>> +
>>>>>>>> + arm-pmu {
>>>>>>>> + compatible = "arm,armv8-pmuv3";
>>>>>>>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>>>>>> + };
>>>>>>> This is wrong, and must go. There should be a separate node for the PMU
>>>>>>> of each microarchitecture, with the appropriate compatible string to
>>>>>>> represent that (see the juno dts).
>>>>>> You are right. The first version we wrote is:
>>>>>> pmu_a53 {
>>>>>> compatible = "arm,cortex-a53-pmu";
>>>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>>>> interrupt-affinity = <&cpu_l0>,
>>>>>> <&cpu_l1>,
>>>>>> <&cpu_l2>,
>>>>>> <&cpu_l3>;
>>>>>> };
>>>>>>
>>>>>> pmu_a72 {
>>>>>> compatible = "arm,cortex-a72-pmu";
>>>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>>>> interrupt-affinity = <&cpu_b0>,
>>>>>> <&cpu_b1>;
>>>>>> };
>>>>>> but unfortunately, the arm pmu driver do not support PPI in two cluster
>>>>>> well,
>>>>>> so we have to replace with this implementation.
>>>>>>> In this case things are messier as the same PPI number is being used
>>>>>>> across clusters. Marc (Cc'd) has been working on PPI partitions, which
>>>>>>> should allow us to support that.
>>>>>> Great! So what we can do right now? Wait this feature, and delete
>>>>>> arm-pmu node?
>>>>> I'd rather you have a look at the patches, test them with your HW,
>>>>> and comment on what doesn't work!
>>>>>
>>>>> You can find the patches over there:
>>>>>
>>>>> https://lkml.org/lkml/2016/4/11/182
>>>>>
>>>>> and on the following branch:
>>>>>
>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git
>>>>> irq/percpu-partition
>>>> I tested these patches. Because our kernel is based on v4.4, so I back
>>>> port most changes about
>>>> include/linux/irqdomain.h
>>>> kernel/irq/irqdomain.c
>>>> drivers/irqchip/irq-gic-v3.c
>>>> and change rk3399.dtsi base on your arm,gic-v3.txt:
>>>>
>>>> gic: interrupt-controller@fee00000 {
>>>> compatible = "arm,gic-v3";
>>>> - #interrupt-cells = <3>;
>>>> + #interrupt-cells = <4>;
>>>> #address-cells = <2>;
>>>> #size-cells = <2>;
>>>> ...
>>>> +
>>>> + ppi-partitions {
>>>> + part0: interrupt-partition-0 {
>>>> + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
>>>> + };
>>>> +
>>>> + part1: interrupt-partition-1 {
>>>> + affinity = <&cpu_b0 &cpu_b1>;
>>>> + };
>>>> + };
>>>>
>>>> and change every interrupts from three cells to four cells, such as
>>>> saradc: saradc@ff100000 {
>>>> compatible = "rockchip,rk3399-saradc";
>>>> reg = <0x0 0xff100000 0x0 0x100>;
>>>> - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>>>> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
>>>> #io-channel-cells = <1>;
>>>> clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
>>>> clock-names = "saradc", "apb_pclk";
>>>>
>>>> and pmu define as:
>>>> pmu_a53 {
>>>> compatible = "arm,cortex-a53-pmu";
>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &part0>;
>>>> interrupt-affinity = <&cpu_l0>,
>>>> <&cpu_l1>,
>>>> <&cpu_l2>,
>>>> <&cpu_l3>;
>>>> };
>>>>
>>>> pmu_a72 {
>>>> compatible = "arm,cortex-a72-pmu", "arm,cortex-a57-pmu";
>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &part1>;
>>>> interrupt-affinity = <&cpu_b0>,
>>>> <&cpu_b1>;
>>>> };
>>>>
>>>> It can boot. And I test with Android simpleperf stat and perf top, it works!
>>>> So these patches work on RK3399.
>>> Good, thanks for testing.
>>>
>>>> But as I mentioned, we must change every interrupt in dts, do you think
>>>> this is acceptable?
>>> I can't see why not.
>>>
>>>>> Of course, you'll have to hack a bit in the PMU code to make it
>>>>> understand per-PMU affinity together with percpu interrupts, but it
>>>>> wouldn't be fun if there was nothing to do...
>>>> I don't change drivers/perf/arm_pmu.c, it just work.
>>> Having had a look with Mark, it may work, but it is rather unsafe. I may
>>> have a go at it, but I'm going to have to rely on you to test it (or you
>>> can send me a board ;-).
>> I came up with the following (untested) patch. Please let me know if this
>> works for you.
>>
>> Thanks,
>>
>> M.
>>
>> >From b88c08bb689d3fe40c46788453a07ba22dae9220 Mon Sep 17 00:00:00 2001
>> From: Marc Zyngier <marc.zyngier@xxxxxxx>
>> Date: Mon, 25 Apr 2016 11:23:54 +0100
>> Subject: [PATCH] drivers/perf: arm-pmu: Handle per-interrupt affinity mask
>>
>> On a big-little system, PMUs can be wired to CPUs using per CPU
>> interrups (PPI). In this case, it is important to make sure that
>> the enable/disable do happen on the right set of CPUs.
>>
>> Do this by querying the corresponding cpumask on the corresponding
>> paths
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
>> ---
>> drivers/perf/arm_pmu.c | 13 +++++++++++--
>> 1 file changed, 11 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
>> index f700908..3de5e1c 100644
>> --- a/drivers/perf/arm_pmu.c
>> +++ b/drivers/perf/arm_pmu.c
>> @@ -603,7 +603,11 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
>>
>> irq = platform_get_irq(pmu_device, 0);
>> if (irq >= 0 && irq_is_percpu(irq)) {
>> - on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
>> + struct cpumask ppi_cpumask;
>> +
>> + irq_get_percpu_devid_partition(irq, &ppi_cpumask);
>> + on_each_cpu_mask(&ppi_cpumask, cpu_pmu_disable_percpu_irq,
>> + &irq, 1);
>> free_percpu_irq(irq, &hw_events->percpu_pmu);
>> } else {
>> for (i = 0; i < irqs; ++i) {
>> @@ -638,6 +642,8 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
>>
>> irq = platform_get_irq(pmu_device, 0);
>> if (irq >= 0 && irq_is_percpu(irq)) {
>> + struct cpumask ppi_cpumask;
>> +
>> err = request_percpu_irq(irq, handler, "arm-pmu",
>> &hw_events->percpu_pmu);
>> if (err) {
>> @@ -645,7 +651,10 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
>> irq);
>> return err;
>> }
>> - on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
>> +
>> + irq_get_percpu_devid_partition(irq, &ppi_cpumask);
>> + on_each_cpu_mask(&ppi_cpumask, cpu_pmu_enable_percpu_irq,
>> + &irq, 1);
>> } else {
>> for (i = 0; i < irqs; ++i) {
>> int cpu = i;
> This patch reduce the count call cpu_pmu_enable/disable_percpu_irq. For
> example, if I call
> perf.android top --cpu 0
> only cpus 0~3 will enable and disable.
>
> But the original code is work too because reference count is right too.
> We just enable the irq we do not want, but there is not side effects.
That's because partition_irq_[un]mask do check that they are called on a
CPU that matches the affinity of that IRQ, and bail out if not. I'm
tempted to put a big fat WARN_ON() there. If there wasn't that test,
you'd end-up enabling the interrupts for the other PMU, and generate
unexpected interrupts.
> Anyway, this patch work.
Thanks for testing.
> I believe the really wrong thing is we have to set interrupt-affinity
> on device tree, but we also set interrupt-partition too. The information
> is duplicated.
Indeed, and that's something that should be addressed separately.
Thanks,
M.
--
Jazz is not dead. It just smells funny...