Re: [PATCH v2 1/8] drm/rect: Add some drm_clip_rect utility functions

[Ville Syrjälä]

On Mon, Apr 25, 2016 at 04:03:13PM +0200, Noralf Trønnes wrote:
> 
> Den 25.04.2016 15:02, skrev Ville Syrjälä:
> > On Mon, Apr 25, 2016 at 02:55:52PM +0200, Noralf Trønnes wrote:
> >> Den 25.04.2016 14:39, skrev Ville Syrjälä:
> >>> On Sun, Apr 24, 2016 at 10:48:55PM +0200, Noralf Trønnes wrote:
> >>>> Add some utility functions for struct drm_clip_rect.
> >>> Looks like mostly you're just duplicating the drm_rect stuff. Why can't
> >>> you use what's there already?
> >> That's because the framebuffer flushing uses drm_clip_rect and not drm_rect:
> > Converting to drm_rect is not an option?
> 
> That's difficult or at least verbose to do because clips is an array.
> I could use drm_rect on the calling side (fbdev) since it's only one clip
> which the changes are merged into, and then convert it when I call dirty().
> But the driver can get zero or more clips from the dirty ioctl so I don't
> see a clean way to convert this array to drm_rect without more code than
> this proposal has.

Just some kind of simple drm_clip_rect_to_rect() thing should be enough AFAICS.

> 
> Here's the driver side:
> 
> static int mipi_dbi_dirtyfb(struct drm_framebuffer *fb, void *vmem,
>                  unsigned flags, unsigned color,
>                  struct drm_clip_rect *clips, unsigned num_clips)
> {
>      struct tinydrm_device *tdev = fb->dev->dev_private;
>      struct lcdreg *reg = tdev->lcdreg;
>      struct drm_clip_rect full_clip = {
>          .x1 = 0,
>          .x2 = fb->width,
>          .y1 = 0,
>          .y2 = fb->height,
>      };
>      struct drm_clip_rect clip;
>      int ret;
> 
>      drm_clip_rect_reset(&clip);
>      drm_clip_rect_merge(&clip, clips, num_clips, flags,
>                  fb->width, fb->height);
>      if (!drm_clip_rect_intersect(&clip, &full_clip)) {
>          DRM_DEBUG_KMS("Empty clip\n");
>          return -EINVAL;
>      }
> [...]

> 
> >> struct drm_framebuffer_funcs {
> >> [...]
> >>           int (*dirty)(struct drm_framebuffer *framebuffer,
> >>                        struct drm_file *file_priv, unsigned flags,
> >>                        unsigned color, struct drm_clip_rect *clips,
> >>                        unsigned num_clips);
> >> };
> >>
> >>>> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
> >>>> ---
> >>>>    drivers/gpu/drm/drm_rect.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
> >>>>    include/drm/drm_rect.h     | 69 ++++++++++++++++++++++++++++++++++++++++++++++
> >>>>    2 files changed, 136 insertions(+)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
> >>>> index a8e2c86..a9fb1a8 100644
> >>>> --- a/drivers/gpu/drm/drm_rect.c
> >>>> +++ b/drivers/gpu/drm/drm_rect.c
> >>>> @@ -434,3 +434,70 @@ void drm_rect_rotate_inv(struct drm_rect *r,
> >>>>    	}
> >>>>    }
> >>>>    EXPORT_SYMBOL(drm_rect_rotate_inv);
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_intersect - intersect two clip rectangles
> >>>> + * @r1: first clip rectangle
> >>>> + * @r2: second clip rectangle
> >>>> + *
> >>>> + * Calculate the intersection of clip rectangles @r1 and @r2.
> >>>> + * @r1 will be overwritten with the intersection.
> >>>> + *
> >>>> + * RETURNS:
> >>>> + * %true if rectangle @r1 is still visible after the operation,
> >>>> + * %false otherwise.
> >>>> + */
> >>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
> >>>> +			     const struct drm_clip_rect *r2)
> >>>> +{
> >>>> +	r1->x1 = max(r1->x1, r2->x1);
> >>>> +	r1->y1 = max(r1->y1, r2->y1);
> >>>> +	r1->x2 = min(r1->x2, r2->x2);
> >>>> +	r1->y2 = min(r1->y2, r2->y2);
> >>>> +
> >>>> +	return drm_clip_rect_visible(r1);
> >>>> +}
> >>>> +EXPORT_SYMBOL(drm_clip_rect_intersect);
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_merge - Merge clip rectangles
> >>>> + * @dst: destination clip rectangle
> >>>> + * @src: source clip rectangle(s), can be NULL
> >>>> + * @num_clips: number of source clip rectangles
> >>>> + * @flags: drm_mode_fb_dirty_cmd flags (DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
> >>>> + * @width: width of clip rectangle if @src is NULL
> >>>> + * @height: height of clip rectangle if @src is NULL
> >>>> + *
> >>>> + * The dirtyfb ioctl allows for a NULL clip rectangle to be passed in,
> >>>> + * so if @src is NULL, width and height is used to set a full clip rectangle.
> >>>> + * @dst takes part in the merge unless it is empty {0,0,0,0}.
> >>>> + */
> >>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
> >>>> +			 struct drm_clip_rect *src, unsigned num_clips,
> >>>> +			 unsigned flags, u32 width, u32 height)
> >>>> +{
> >>>> +	int i;
> >>>> +
> >>>> +	if (!src || !num_clips) {
> >>>> +		dst->x1 = 0;
> >>>> +		dst->x2 = width;
> >>>> +		dst->y1 = 0;
> >>>> +		dst->y2 = height;
> >>>> +		return;
> >>>> +	}
> >>>> +
> >>>> +	if (drm_clip_rect_is_empty(dst)) {
> >>>> +		dst->x1 = ~0;
> >>>> +		dst->y1 = ~0;
> >>>> +	}
> >>>> +
> >>>> +	for (i = 0; i < num_clips; i++) {
> >>>> +		if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
> >>>> +			i++;
> >>>> +		dst->x1 = min(dst->x1, src[i].x1);
> >>>> +		dst->x2 = max(dst->x2, src[i].x2);
> >>>> +		dst->y1 = min(dst->y1, src[i].y1);
> >>>> +		dst->y2 = max(dst->y2, src[i].y2);
> >>>> +	}
> >>>> +}
> >>>> +EXPORT_SYMBOL(drm_clip_rect_merge);
> >>>> diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
> >>>> index 83bb156..936ad8d 100644
> >>>> --- a/include/drm/drm_rect.h
> >>>> +++ b/include/drm/drm_rect.h
> >>>> @@ -24,6 +24,8 @@
> >>>>    #ifndef DRM_RECT_H
> >>>>    #define DRM_RECT_H
> >>>>    
> >>>> +#include <uapi/drm/drm.h>
> >>>> +
> >>>>    /**
> >>>>     * DOC: rect utils
> >>>>     *
> >>>> @@ -171,4 +173,71 @@ void drm_rect_rotate_inv(struct drm_rect *r,
> >>>>    			 int width, int height,
> >>>>    			 unsigned int rotation);
> >>>>    
> >>>> +/**
> >>>> + * drm_clip_rect_width - determine the clip rectangle width
> >>>> + * @r: clip rectangle whose width is returned
> >>>> + *
> >>>> + * RETURNS:
> >>>> + * The width of the clip rectangle.
> >>>> + */
> >>>> +static inline int drm_clip_rect_width(const struct drm_clip_rect *r)
> >>>> +{
> >>>> +	return r->x2 - r->x1;
> >>>> +}
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_height - determine the clip rectangle height
> >>>> + * @r: clip rectangle whose height is returned
> >>>> + *
> >>>> + * RETURNS:
> >>>> + * The height of the clip rectangle.
> >>>> + */
> >>>> +static inline int drm_clip_rect_height(const struct drm_clip_rect *r)
> >>>> +{
> >>>> +	return r->y2 - r->y1;
> >>>> +}
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_visible - determine if the the clip rectangle is visible
> >>>> + * @r: clip rectangle whose visibility is returned
> >>>> + *
> >>>> + * RETURNS:
> >>>> + * %true if the clip rectangle is visible, %false otherwise.
> >>>> + */
> >>>> +static inline bool drm_clip_rect_visible(const struct drm_clip_rect *r)
> >>>> +{
> >>>> +	return drm_clip_rect_width(r) > 0 && drm_clip_rect_height(r) > 0;
> >>>> +}
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_reset - Reset clip rectangle
> >>>> + * @clip: clip rectangle
> >>>> + *
> >>>> + * Sets clip rectangle to {0,0,0,0}.
> >>>> + */
> >>>> +static inline void drm_clip_rect_reset(struct drm_clip_rect *clip)
> >>>> +{
> >>>> +	clip->x1 = 0;
> >>>> +	clip->x2 = 0;
> >>>> +	clip->y1 = 0;
> >>>> +	clip->y2 = 0;
> >>>> +}
> >>>> +
> >>>> +/**
> >>>> + * drm_clip_rect_is_empty - Is clip rectangle empty?
> >>>> + * @clip: clip rectangle
> >>>> + *
> >>>> + * Returns true if clip rectangle is {0,0,0,0}.
> >>>> + */
> >>>> +static inline bool drm_clip_rect_is_empty(struct drm_clip_rect *clip)
> >>>> +{
> >>>> +	return (!clip->x1 && !clip->x2 && !clip->y1 && !clip->y2);
> >>>> +}
> >>>> +
> >>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
> >>>> +			     const struct drm_clip_rect *r2);
> >>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
> >>>> +			 struct drm_clip_rect *src, unsigned num_clips,
> >>>> +			 unsigned flags, u32 width, u32 height);
> >>>> +
> >>>>    #endif
> >>>> -- 
> >>>> 2.2.2
> >>>>
> >>>> _______________________________________________
> >>>> dri-devel mailing list
> >>>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> >>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC