Re: [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller

[Wolfram Sang]

On Mon, Apr 25, 2016 at 04:33:34PM +0200, Jan Glauber wrote:
> From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
> 
> Use High-Level Controller (HLC) when possible. The HLC can read/write
> up to 8 bytes and is completely optional. The most important difference
> of the HLC is that it only requires one interrupt for a transfer
> (up to 8 bytes) where the low-level read/write requires 2 interrupts
> plus one interrupt per transferred byte. Since the interrupts are costly
> using the HLC improves the performance. Also, the HLC provides improved
> error handling.
> 
> Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>

Applied to for-next, thanks!

I can recommend using --strict with checkpatch. It found some issues:

total: 0 errors, 0 warnings, 18 checks, 427 lines checked

CHECK: No space is necessary after a cast
#327: FILE: drivers/i2c/busses/i2c-octeon.c:563:
+		ext |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;

I fixed all 14 of those.

CHECK: braces {} should be used on all arms of this statement
#325: FILE: drivers/i2c/busses/i2c-octeon.c:561:
+	if (msgs[0].len == 2) {
[...]
+	} else
[...]

and 2 of those.

Attachment: signature.asc
Description: PGP signature