[PATCH] cpufreq: Use IS_ENABLED() instead of checking for built-in or module
From: Javier Martinez Canillas
Date: Tue Apr 26 2016 - 20:14:37 EST
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
drivers/cpufreq/e_powersaver.c | 14 +++++++-------
drivers/cpufreq/ppc_cbe_cpufreq.h | 2 +-
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 5ec87e3a97bd..cdf097b29862 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -22,7 +22,7 @@
#include <asm/msr.h>
#include <asm/tsc.h>
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
#include <linux/acpi.h>
#include <acpi/processor.h>
#endif
@@ -35,7 +35,7 @@
struct eps_cpu_data {
u32 fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
u32 bios_limit;
#endif
struct cpufreq_frequency_table freq_table[];
@@ -48,7 +48,7 @@ static int freq_failsafe_off;
static int voltage_failsafe_off;
static int set_max_voltage;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
static int ignore_acpi_limit;
static struct acpi_processor_performance *eps_acpi_cpu_perf;
@@ -186,7 +186,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
int k, step, voltage;
int ret;
int states;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
unsigned int limit;
#endif
@@ -286,7 +286,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Calc FSB speed */
fsb = cpu_khz / current_multiplier;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
/* Check for ACPI processor speed limit */
if (!ignore_acpi_limit && !eps_acpi_init()) {
if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
@@ -333,7 +333,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Copy basic values */
centaur->fsb = fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
centaur->bios_limit = limit;
#endif
@@ -418,7 +418,7 @@ module_param(freq_failsafe_off, int, 0644);
MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
module_param(voltage_failsafe_off, int, 0644);
MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
module_param(ignore_acpi_limit, int, 0644);
MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
#endif
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index b4c00a5a6a59..3eace725ccd6 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
+#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
--
2.5.5