From: "J.D. Schroeder" <jay.schroeder@xxxxxxxxxx>
This commit fixes the clock data inside the DRA7xx clocks device tree
structure for the gmac_gmii_ref_clk_div clock. This clock is actually
the GMAC_MAIN_CLK and has nothing to do with the register at address
0x4a0093d0. If CLKSEL_REF bit 24 inside of CM_GMAC_GMAC_CLKCTRL, is
set to 1 in order to use the GMAC_RMII_CLK instead of the
GMAC_RMII_HS_CLK, the kernel generates a clock divider warning:
WARNING: CPU: 0 PID: 0 at drivers/clk/clk-divider.c:129 clk_divider_recalc_rate+0xa8/0xe0()
gmac_gmii_ref_clk_div: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set
By properly configuring the gmac_gmii_ref_clk_div (GMAC_MAIN_CLK) to
have the parent of dpll_gmac_m2_ck always divided by 2 the warning is
resolved and the clock tree is fixed up.
Additionally, a new clock called rmii_50mhz_clk_mux is defined that
does utilize CM_GMAC_GMAC_CLKCTRL[24] CLKSEL_REF to configure the
source clock for the RMII_50MHZ_CLK.
Signed-off-by: J.D. Schroeder <jay.schroeder@xxxxxxxxxx>
Reviewed-by: Trenton Andres <trenton.andres@xxxxxxxxxx>
---
arch/arm/boot/dts/dra7xx-clocks.dtsi | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d0bae06..9d1a583 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1710,13 +1710,20 @@
reg = <0x0c00>;
};
- gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+ rmii_50mhz_clk_mux: rmii_50mhz_clk_mux {
#clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll_gmac_m2_ck>;
+ compatible = "ti,mux-clock";
+ clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
ti,bit-shift = <24>;
reg = <0x13d0>;
- ti,dividers = <2>;
+ };
+
+ gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&dpll_gmac_m2_ck>;
+ clock-mult = <1>;
+ clock-div = <2>;
};
gmac_rft_clk_mux: gmac_rft_clk_mux {