[tip:x86/boot] x86/boot: Calculate decompression size during boot not build

From: tip-bot for Yinghai Lu
Date: Fri Apr 29 2016 - 05:53:26 EST

Next message: Dong Aisheng: "[RFC PATCH 1/1] clk: imx7d: move clk setting out of imx7d_clocks_init"
Previous message: tip-bot for Yinghai Lu: "[tip:x86/boot] x86/boot: Move compressed kernel to the end of the decompression buffer"
In reply to: Kees Cook: "[PATCH 3/6] x86/boot: Calculate decompression size during boot not build"
Next in thread: Kees Cook: "[PATCH 1/6] x86/KASLR: Handle kernel relocation above 2G"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Commit-ID: d607251ba9acc0b5faeaa08818f60d041dd19472
Gitweb: http://git.kernel.org/tip/d607251ba9acc0b5faeaa08818f60d041dd19472
Author: Yinghai Lu <yinghai@xxxxxxxxxx>
AuthorDate: Thu, 28 Apr 2016 17:09:05 -0700
Committer: Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Fri, 29 Apr 2016 11:03:29 +0200

x86/boot: Calculate decompression size during boot not build

Currently z_extract_offset is calculated in boot/compressed/mkpiggy.c.
This doesn't work well because mkpiggy.c doesn't know the details of the
decompressor in use. As a result, it can only make an estimation, which
has risks:

- output + output_len (VO) could be much bigger than input + input_len
(ZO). In this case, the decompressed kernel plus relocs could overwrite
the decompression code while it is running.

- The head code of ZO could be bigger than z_extract_offset. In this case
an overwrite could happen when the head code is running to move ZO to
the end of buffer. Though currently the size of the head code is very
small it's still a potential risk. Since there is no rule to limit the
size of the head code of ZO, it runs the risk of suddenly becoming a
(hard to find) bug.

Instead, this moves the z_extract_offset calculation into header.S, and
makes adjustments to be sure that the above two cases can never happen,
and further corrects the comments describing the calculations.

Since we have (in the previous patch) made ZO always be located against
the end of decompression buffer, z_extract_offset is only used here to
calculate an appropriate buffer size (INIT_SIZE), and is not longer used
elsewhere. As such, it can be removed from voffset.h.

Additionally clean up #if/#else #define to improve readability.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
[ Rewrote the changelog and comments. ]
Signed-off-by: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Dave Young <dyoung@xxxxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Vivek Goyal <vgoyal@xxxxxxxxxx>
Cc: lasse.collin@xxxxxxxxxxx
Link: http://lkml.kernel.org/r/1461888548-32439-4-git-send-email-keescook@xxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
arch/x86/boot/Makefile | 2 +-
arch/x86/boot/compressed/mkpiggy.c | 21 ++++-----------------
arch/x86/boot/header.S | 35 +++++++++++++++++++++++++----------
3 files changed, 30 insertions(+), 28 deletions(-)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index b1ef9e4..942f7dab 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -95,7 +95,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)

-sed-zoffset := -e 's/^$[0-9a-fA-F]*$ [ABCDGRSTVW] $startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*$$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^$[0-9a-fA-F]*$ [ABCDGRSTVW] $startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*$$$/\#define ZO_\2 0x\1/p'

quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
index b980046..f095ed9 100644
--- a/arch/x86/boot/compressed/mkpiggy.c
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -18,11 +18,10 @@
*
* H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
*
- * ----------------------------------------------------------------------- */
-
-/*
- * Compute the desired load offset from a compressed program; outputs
- * a small assembly wrapper with the appropriate symbols defined.
+ * -----------------------------------------------------------------------
+ *
+ * Outputs a small assembly wrapper with the appropriate symbols defined.
+ *
*/

#include <stdlib.h>
@@ -35,7 +34,6 @@ int main(int argc, char *argv[])
{
uint32_t olen;
long ilen;
- unsigned long offs;
unsigned long run_size;
FILE *f = NULL;
int retval = 1;
@@ -67,15 +65,6 @@ int main(int argc, char *argv[])
ilen = ftell(f);
olen = get_unaligned_le32(&olen);

- /*
- * Now we have the input (compressed) and output (uncompressed)
- * sizes, compute the necessary decompression offset...
- */
-
- offs = (olen > ilen) ? olen - ilen : 0;
- offs += olen >> 12; /* Add 8 bytes for each 32K block */
- offs += 64*1024 + 128; /* Add 64K + 128 bytes slack */
- offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
run_size = atoi(argv[2]);

printf(".section \".rodata..compressed\",\"a\",@progbits\n");
@@ -83,8 +72,6 @@ int main(int argc, char *argv[])
printf("z_input_len = %lu\n", ilen);
printf(".globl z_output_len\n");
printf("z_output_len = %lu\n", (unsigned long)olen);
- printf(".globl z_extract_offset\n");
- printf("z_extract_offset = 0x%lx\n", offs);
printf(".globl z_run_size\n");
printf("z_run_size = %lu\n", run_size);

diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index fd85b9e..3dd5be3 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -508,13 +508,10 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
# To avoid problems with the compressed data's meta information an extra 18
# bytes are needed. Leading to the formula:
#
-# extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size
+# extra_bytes = (uncompressed_size >> 12) + 32768 + 18
#
# Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
# Adding 32768 instead of 32767 just makes for round numbers.
-# Adding the decompressor_size is necessary as it musht live after all
-# of the data as well. Last I measured the decompressor is about 14K.
-# 10K of actual data and 4K of bss.
#
# Above analysis is for decompressing gzip compressed kernel only. Up to
# now 6 different decompressor are supported all together. And among them
@@ -524,17 +521,35 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
# the description in lib/decompressor_xxx.c for specific information.
#
# extra_bytes = (uncompressed_size >> 12) + 65536 + 128
-#
-# Note that this calculation, which results in z_extract_offset (below),
-# is currently generated in compressed/mkpiggy.c

-#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define ZO_z_extra_bytes ((ZO_z_output_len >> 12) + 65536 + 128)
+#if ZO_z_output_len > ZO_z_input_len
+# define ZO_z_extract_offset (ZO_z_output_len + ZO_z_extra_bytes - \
+ ZO_z_input_len)
+#else
+# define ZO_z_extract_offset ZO_z_extra_bytes
+#endif
+
+/*
+ * The extract_offset has to be bigger than ZO head section. Otherwise when
+ * the head code is running to move ZO to the end of the buffer, it will
+ * overwrite the head code itself.
+ */
+#if (ZO__ehead - ZO_startup_32) > ZO_z_extract_offset
+# define ZO_z_min_extract_offset ((ZO__ehead - ZO_startup_32 + 4095) & ~4095)
+#else
+# define ZO_z_min_extract_offset ((ZO_z_extract_offset + 4095) & ~4095)
+#endif
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_min_extract_offset)
+
#define VO_INIT_SIZE (VO__end - VO__text)
#if ZO_INIT_SIZE > VO_INIT_SIZE
-#define INIT_SIZE ZO_INIT_SIZE
+# define INIT_SIZE ZO_INIT_SIZE
#else
-#define INIT_SIZE VO_INIT_SIZE
+# define INIT_SIZE VO_INIT_SIZE
#endif
+
init_size: .long INIT_SIZE # kernel initialization size
handover_offset: .long 0 # Filled in by build.c

Next message: Dong Aisheng: "[RFC PATCH 1/1] clk: imx7d: move clk setting out of imx7d_clocks_init"
Previous message: tip-bot for Yinghai Lu: "[tip:x86/boot] x86/boot: Move compressed kernel to the end of the decompression buffer"
In reply to: Kees Cook: "[PATCH 3/6] x86/boot: Calculate decompression size during boot not build"
Next in thread: Kees Cook: "[PATCH 1/6] x86/KASLR: Handle kernel relocation above 2G"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]