Re: [PATCH v2 03/11] serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback

[Peter Hurley]

On 04/29/2016 05:58 AM, Geert Uytterhoeven wrote:
> Documentation/serial/driver clearly states:
> 
>     If the port does not support CTS, DCD or DSR, the driver should
>     indicate that the signal is permanently active.
> 
> Hence always set TIOCM_CTS, as we currently don't look at the CTS
> hardware line state at all.
> 
> FWIW, this fixes the transmit path when hardware-assisted flow control
> is enabled, and userspace enables CRTSCTS.
> The receive path is still broken, as RTS is never asserted.

Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>