[PATCH 08/13] iio: health/afe440x: Remove channel names

From: Andrew F. Davis
Date: Sun May 01 2016 - 16:40:51 EST

Next message: Geert Uytterhoeven: "Re: [PATCH RESEND 06/12] clk: sh: SH7750/51 PLL and divider clock driver"
Previous message: Andrew F. Davis: "[PATCH 12/13] iio: health/afe440x: Remove unused definitions"
In reply to: Jonathan Cameron: "Re: [PATCH 12/13] iio: health/afe440x: Remove unused definitions"
Next in thread: Jonathan Cameron: "Re: [PATCH 08/13] iio: health/afe440x: Remove channel names"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

These AFEs have 4 ADC mesuring stages (called LED2, ALED2, LED1, and
ALED1 in the datasheet), we map these as channels, these stages can serve
different purposes depending on the application. For instance the AFE4404
has an additional LED (LED3), this LED can be timed to be active during
stage 2 (or anystage, but the datasheet describes this case and the name
of the stage reflects this use). This ability is used further in upcoming
parts that tie the front-end gain and the LED timings together. For these
reasons we remove explicit naming the channels.

Without channel names it is best that the index numbers are in order to
match the stage number, reorder the channel numbers.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
.../ABI/testing/sysfs-bus-iio-health-afe440x | 39 ++++++++++------------
drivers/iio/health/afe4403.c | 28 ++++++++--------
drivers/iio/health/afe4404.c | 30 ++++++++---------
drivers/iio/health/afe440x.h | 8 ++---
4 files changed, 51 insertions(+), 54 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
index b19053a..a067073 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -8,38 +8,35 @@ Description:
Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for
Rf2 and Cf2 values.

-What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw
- /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw
-Date: December 2015
+What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
+Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@xxxxxx>
Description:
Get measured values from the ADC for these stages. Y is the
- specific LED number. The values are expressed in 24-bit twos
- complement.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw
-Date: December 2015
-KernelVersion:
-Contact: Andrew F. Davis <afd@xxxxxx>
-Description:
- Get differential values from the ADC for these stages. Y is the
- specific LED number. The values are expressed in 24-bit twos
- complement for the specified LEDs.
+ specific stage number corresponding to datasheet stage names
+ as follows:
+ 1 -> LED2
+ 2 -> ALED2/LED3
+ 3 -> LED1
+ 4 -> ALED1/LED4
+ Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
+ respectively which simply helper channels containing the
+ calculated difference in the value of stage 1 - 2 and 3 - 4.
+ The values are expressed in 24-bit twos complement.

-What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset
- /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset
-Date: December 2015
+What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
+Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@xxxxxx>
Description:
Get and set the offset cancellation DAC setting for these
stages. The values are expressed in 5-bit sign-magnitude.

-What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw
-Date: December 2015
+What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@xxxxxx>
Description:
- Get and set the LED current for the specified LED. Y is the
- specific LED number.
+ Get and set the LED current for the specified LED active during
+ this stage. Y is the specific stage number.
diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c
index cac6090..4a58064 100644
--- a/drivers/iio/health/afe4403.c
+++ b/drivers/iio/health/afe4403.c
@@ -121,38 +121,38 @@ struct afe4403_data {
};

enum afe4403_chan_id {
+ LED2 = 1,
+ ALED2,
LED1,
ALED1,
- LED2,
- ALED2,
- LED1_ALED1,
LED2_ALED2,
+ LED1_ALED1,
ILED1,
ILED2,
};

static const struct afe440x_reg_info afe4403_reg_info[] = {
- [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, 0, NULL),
- [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, 0, NULL),
[LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, 0, NULL),
[ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL),
- [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL),
+ [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, 0, NULL),
+ [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, 0, NULL),
[LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL),
+ [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL),
[ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED1),
[ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED2),
};

static const struct iio_chan_spec afe4403_channels[] = {
/* ADC values */
- AFE440X_INTENSITY_CHAN(LED1, "led1", 0),
- AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", 0),
- AFE440X_INTENSITY_CHAN(LED2, "led2", 0),
- AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", 0),
- AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0),
- AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0),
+ AFE440X_INTENSITY_CHAN(LED2, 0),
+ AFE440X_INTENSITY_CHAN(ALED2, 0),
+ AFE440X_INTENSITY_CHAN(LED1, 0),
+ AFE440X_INTENSITY_CHAN(ALED1, 0),
+ AFE440X_INTENSITY_CHAN(LED2_ALED2, 0),
+ AFE440X_INTENSITY_CHAN(LED1_ALED1, 0),
/* LED current */
- AFE440X_CURRENT_CHAN(ILED1, "led1"),
- AFE440X_CURRENT_CHAN(ILED2, "led2"),
+ AFE440X_CURRENT_CHAN(ILED1),
+ AFE440X_CURRENT_CHAN(ILED2),
};

static const struct afe440x_val_table afe4403_res_table[] = {
diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c
index 2edb7d7..7806a45 100644
--- a/drivers/iio/health/afe4404.c
+++ b/drivers/iio/health/afe4404.c
@@ -122,24 +122,24 @@ struct afe4404_data {
};

enum afe4404_chan_id {
+ LED2 = 1,
+ ALED2,
LED1,
ALED1,
- LED2,
- ALED2,
- LED1_ALED1,
LED2_ALED2,
+ LED1_ALED1,
ILED1,
ILED2,
ILED3,
};

static const struct afe440x_reg_info afe4404_reg_info[] = {
- [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED1),
- [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED1),
[LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED2),
[ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED2),
- [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL),
+ [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED1),
+ [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED1),
[LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL),
+ [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL),
[ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED1),
[ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED2),
[ILED3] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED3),
@@ -147,16 +147,16 @@ static const struct afe440x_reg_info afe4404_reg_info[] = {

static const struct iio_chan_spec afe4404_channels[] = {
/* ADC values */
- AFE440X_INTENSITY_CHAN(LED1, "led1", BIT(IIO_CHAN_INFO_OFFSET)),
- AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", BIT(IIO_CHAN_INFO_OFFSET)),
- AFE440X_INTENSITY_CHAN(LED2, "led2", BIT(IIO_CHAN_INFO_OFFSET)),
- AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", BIT(IIO_CHAN_INFO_OFFSET)),
- AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0),
- AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0),
+ AFE440X_INTENSITY_CHAN(LED2, BIT(IIO_CHAN_INFO_OFFSET)),
+ AFE440X_INTENSITY_CHAN(ALED2, BIT(IIO_CHAN_INFO_OFFSET)),
+ AFE440X_INTENSITY_CHAN(LED1, BIT(IIO_CHAN_INFO_OFFSET)),
+ AFE440X_INTENSITY_CHAN(ALED1, BIT(IIO_CHAN_INFO_OFFSET)),
+ AFE440X_INTENSITY_CHAN(LED2_ALED2, 0),
+ AFE440X_INTENSITY_CHAN(LED1_ALED1, 0),
/* LED current */
- AFE440X_CURRENT_CHAN(ILED1, "led1"),
- AFE440X_CURRENT_CHAN(ILED2, "led2"),
- AFE440X_CURRENT_CHAN(ILED3, "led3"),
+ AFE440X_CURRENT_CHAN(ILED1),
+ AFE440X_CURRENT_CHAN(ILED2),
+ AFE440X_CURRENT_CHAN(ILED3),
};

static const struct afe440x_val_table afe4404_res_table[] = {
diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h
index 583d071..713972f 100644
--- a/drivers/iio/health/afe440x.h
+++ b/drivers/iio/health/afe440x.h
@@ -103,7 +103,7 @@ struct afe440x_reg_info {
.mask = _sm ## _MASK, \
}

-#define AFE440X_INTENSITY_CHAN(_index, _name, _mask) \
+#define AFE440X_INTENSITY_CHAN(_index, _mask) \
{ \
.type = IIO_INTENSITY, \
.channel = _index, \
@@ -115,20 +115,20 @@ struct afe440x_reg_info {
.storagebits = 32, \
.endianness = IIO_CPU, \
}, \
- .extend_name = _name, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
_mask, \
+ .indexed = true, \
}

-#define AFE440X_CURRENT_CHAN(_index, _name) \
+#define AFE440X_CURRENT_CHAN(_index) \
{ \
.type = IIO_CURRENT, \
.channel = _index, \
.address = _index, \
.scan_index = -1, \
- .extend_name = _name, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
+ .indexed = true, \
.output = true, \
}

--
2.8.1

Next message: Geert Uytterhoeven: "Re: [PATCH RESEND 06/12] clk: sh: SH7750/51 PLL and divider clock driver"
Previous message: Andrew F. Davis: "[PATCH 12/13] iio: health/afe440x: Remove unused definitions"
In reply to: Jonathan Cameron: "Re: [PATCH 12/13] iio: health/afe440x: Remove unused definitions"
Next in thread: Jonathan Cameron: "Re: [PATCH 08/13] iio: health/afe440x: Remove channel names"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]