[PATCH] slicoss: Remove unused macros
From: Colin Pitrat
Date: Sun May 01 2016 - 16:59:58 EST
Staging: slicoss: remove unused macros.
Signed-off-by: Colin Pitrat <colin.pitrat@xxxxxxxxx>
---
drivers/staging/slicoss/TODO | 2 -
drivers/staging/slicoss/slic.h | 43 ---------------
drivers/staging/slicoss/slichw.h | 107 +-------------------------------------
drivers/staging/slicoss/slicoss.c | 22 ++------
4 files changed, 6 insertions(+), 168 deletions(-)
diff --git a/drivers/staging/slicoss/TODO b/drivers/staging/slicoss/TODO
index 9019729..7e5dbc7 100644
--- a/drivers/staging/slicoss/TODO
+++ b/drivers/staging/slicoss/TODO
@@ -11,8 +11,6 @@ TODO:
- without CONFIG_X86_64 confusion
- do 64 bit correctly
- don't depend on order of union
- - get rid of ASSERT(), use BUG() instead but only where necessary
- looks like most aren't really useful
- no new SIOCDEVPRIVATE ioctl allowed
- don't use module_param for configuring interrupt mitigation
use ethtool instead
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index cc0afee..7b20a0f 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -54,7 +54,6 @@
#define GB_RCVUCODE_VERS_DATE "2006/03/27 15:12:15"
static u32 OasisRcvUCodeLen = 512;
static u32 GBRcvUCodeLen = 512;
-#define SECTION_SIZE 65536
#define SLIC_RSPQ_PAGES_GB 10
#define SLIC_RSPQ_BUFSINPAGE (PAGE_SIZE / SLIC_RSPBUF_SIZE)
@@ -117,14 +116,7 @@ struct slic_handle {
};
#define SLIC_HANDLE_FREE 0x0000
-#define SLIC_HANDLE_DATA 0x0001
#define SLIC_HANDLE_CMD 0x0002
-#define SLIC_HANDLE_CONTEXT 0x0003
-#define SLIC_HANDLE_TEAM 0x0004
-
-#define handle_index handle.parts.index
-#define handle_bottom handle.parts.bottombits
-#define handle_token handle.whole
#define SLIC_HOSTCMD_SIZE 512
@@ -173,35 +165,19 @@ struct mcast_address {
#define CARD_DOWN 0x00000000
#define CARD_UP 0x00000001
-#define CARD_FAIL 0x00000002
-#define CARD_DIAG 0x00000003
-#define CARD_SLEEP 0x00000004
#define ADAPT_DOWN 0x00
#define ADAPT_UP 0x01
-#define ADAPT_FAIL 0x02
-#define ADAPT_RESET 0x03
-#define ADAPT_SLEEP 0x04
-#define ADAPT_FLAGS_BOOTTIME 0x0001
-#define ADAPT_FLAGS_IS64BIT 0x0002
-#define ADAPT_FLAGS_PENDINGLINKDOWN 0x0004
#define ADAPT_FLAGS_FIBERMEDIA 0x0008
-#define ADAPT_FLAGS_LOCKS_ALLOCED 0x0010
-#define ADAPT_FLAGS_INT_REGISTERED 0x0020
-#define ADAPT_FLAGS_LOAD_TIMER_SET 0x0040
-#define ADAPT_FLAGS_STATS_TIMER_SET 0x0080
-#define ADAPT_FLAGS_RESET_TIMER_SET 0x0100
#define LINK_DOWN 0x00
-#define LINK_CONFIG 0x01
#define LINK_UP 0x02
#define LINK_10MB 0x00
#define LINK_100MB 0x01
#define LINK_AUTOSPEED 0x02
#define LINK_1000MB 0x03
-#define LINK_10000MB 0x04
#define LINK_HALFD 0x00
#define LINK_FULLD 0x01
@@ -214,9 +190,6 @@ struct mcast_address {
#define MAC_LOOPBACK 0x00000010
#define MAC_ALLMCAST 0x00000020
-#define SLIC_DUPLEX(x) ((x == LINK_FULLD) ? "FDX" : "HDX")
-#define SLIC_SPEED(x) ((x == LINK_100MB) ? "100Mb" : ((x == LINK_1000MB) ?\
- "1000Mb" : " 10Mb"))
#define SLIC_LINKSTATE(x) ((x == LINK_DOWN) ? "Down" : "Up ")
#define SLIC_ADAPTER_STATE(x) ((x == ADAPT_UP) ? "UP" : "Down")
#define SLIC_CARD_STATE(x) ((x == CARD_UP) ? "UP" : "Down")
@@ -254,8 +227,6 @@ struct slicnet_stats {
};
#define SLIC_LOADTIMER_PERIOD 1
-#define SLIC_INTAGG_DEFAULT 200
-#define SLIC_LOAD_0 0
#define SLIC_INTAGG_0 0
#define SLIC_LOAD_1 8000
#define SLIC_LOAD_2 10000
@@ -267,16 +238,6 @@ struct slicnet_stats {
#define SLIC_INTAGG_3 150
#define SLIC_INTAGG_4 200
#define SLIC_INTAGG_5 250
-#define SLIC_LOAD_1GB 3000
-#define SLIC_LOAD_2GB 6000
-#define SLIC_LOAD_3GB 12000
-#define SLIC_LOAD_4GB 24000
-#define SLIC_LOAD_5GB 48000
-#define SLIC_INTAGG_1GB 50
-#define SLIC_INTAGG_2GB 75
-#define SLIC_INTAGG_3GB 100
-#define SLIC_INTAGG_4GB 100
-#define SLIC_INTAGG_5GB 100
struct ether_header {
unsigned char ether_dhost[6];
@@ -324,10 +285,6 @@ struct sliccard {
u32 reg_valueh[32];
};
-#define NUM_CFG_SPACES 2
-#define NUM_CFG_REGS 64
-#define NUM_CFG_REG_ULONGS (NUM_CFG_REGS / sizeof(u32))
-
struct physcard {
struct adapter *adapter[SLIC_MAX_PORTS];
struct physcard *next;
diff --git a/drivers/staging/slicoss/slichw.h b/drivers/staging/slicoss/slichw.h
index 9723b4a..d832dbd 100644
--- a/drivers/staging/slicoss/slichw.h
+++ b/drivers/staging/slicoss/slichw.h
@@ -96,7 +96,6 @@
#define VRHSTATB_IPLERR 0x00020000
#define VRHSTATB_IPHERR 0x00010000
#define SLIC_MAX64_BCNT 23
-#define SLIC_MAX32_BCNT 26
#define IHCMD_XMT_REQ 0x01
#define IHFLG_IFSHFT 2
#define SLIC_RSPBUF_SIZE 32
@@ -116,17 +115,14 @@
#define ISR_UPCERR 0x01000000
#define ISR_XDROP 0x00800000
#define ISR_UPCBSY 0x00020000
-#define ISR_EVMSK 0xffff0000
#define ISR_PINGMASK 0x00700000
#define ISR_PINGDSMASK 0x00710000
-#define ISR_UPCMASK 0x11000000
#define SLIC_WCS_START 0x80000000
#define SLIC_WCS_COMPARE 0x40000000
#define SLIC_RCVWCS_BEGIN 0x40000000
#define SLIC_RCVWCS_FINISH 0x80000000
#define SLIC_PM_MAXPATTERNS 6
#define SLIC_PM_PATTERNSIZE 128
-#define SLIC_PMCAPS_WAKEONLAN 0x00000001
#define MIICR_REG_PCR 0x00000000
#define MIICR_REG_4 0x00040000
#define MIICR_REG_9 0x00090000
@@ -138,7 +134,6 @@
#define PCR_AUTONEG 0x1000
#define PCR_AUTONEG_RST 0x0200
#define PCR_DUPLEX_FULL 0x0100
-#define PSR_LINKUP 0x0004
#define PAR_ADV100FD 0x0100
#define PAR_ADV100HD 0x0080
@@ -148,41 +143,17 @@
#define PAR_802_3 0x0001
#define PAR_ADV1000XFD 0x0020
-#define PAR_ADV1000XHD 0x0040
#define PAR_ASYMPAUSE_FIBER 0x0180
#define PGC_ADV1000FD 0x0200
-#define PGC_ADV1000HD 0x0100
-#define SEEQ_LINKFAIL 0x4000
-#define SEEQ_SPEED 0x0080
-#define SEEQ_DUPLEX 0x0040
-#define TDK_DUPLEX 0x0800
-#define TDK_SPEED 0x0400
#define MRV_REG16_XOVERON 0x0068
#define MRV_REG16_XOVEROFF 0x0008
-#define MRV_SPEED_1000 0x8000
-#define MRV_SPEED_100 0x4000
-#define MRV_SPEED_10 0x0000
-#define MRV_FULLDUPLEX 0x2000
-#define MRV_LINKUP 0x0400
#define GIG_LINKUP 0x0001
#define GIG_FULLDUPLEX 0x0002
-#define GIG_SPEED_MASK 0x000C
#define GIG_SPEED_1000 0x0008
#define GIG_SPEED_100 0x0004
-#define GIG_SPEED_10 0x0000
-
-#define MCR_RESET 0x80000000
-#define MCR_CRCEN 0x40000000
-#define MCR_FULLD 0x10000000
-#define MCR_PAD 0x02000000
-#define MCR_RETRYLATE 0x01000000
-#define MCR_BOL_SHIFT 21
-#define MCR_IPG1_SHIFT 14
-#define MCR_IPG2_SHIFT 7
-#define MCR_IPG3_SHIFT 0
-#define GMCR_RESET 0x80000000
+
#define GMCR_GBIT 0x20000000
#define GMCR_FULLD 0x10000000
#define GMCR_GAPBB_SHIFT 14
@@ -197,7 +168,6 @@
#define XCR_RESET 0x80000000
#define XCR_XMTEN 0x40000000
#define XCR_PAUSEEN 0x20000000
-#define XCR_LOADRNG 0x10000000
#define RCR_RESET 0x80000000
#define RCR_RCVEN 0x40000000
#define RCR_RCVALL 0x20000000
@@ -216,11 +186,7 @@
#define GRCR_HASHSIZE_SHIFT 17
#define GRCR_HASHSIZE 14
-#define SLIC_EEPROM_ID 0xA5A5
-#define SLIC_SRAM_SIZE2GB (64 * 1024)
-#define SLIC_SRAM_SIZE1GB (32 * 1024)
#define SLIC_HOSTID_DEFAULT 0xFFFF /* uninitialized hostid */
-#define SLIC_NBR_MACS 4
struct slic_rcvbuf {
u8 pad1[6];
@@ -295,15 +261,12 @@ struct slic_regs {
u32 slic_icr; /* Interrupt Control Register */
u32 pad2;
-#define SLIC_ICR 0x0008
u32 slic_isp; /* Interrupt status pointer */
u32 pad1;
-#define SLIC_ISP 0x0010
u32 slic_isr; /* Interrupt status */
u32 pad3;
-#define SLIC_ISR 0x0018
u32 slic_hbar; /* Header buffer address reg */
u32 pad4;
@@ -312,15 +275,11 @@ struct slic_regs {
* 7-0 - number of buffers passed
* Buffers are 256 bytes long on 256-byte boundaries.
*/
-#define SLIC_HBAR 0x0020
-#define SLIC_HBAR_CNT_MSK 0x000000FF
u32 slic_dbar; /* Data buffer handle & address reg */
u32 pad5;
/* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page. */
-#define SLIC_DBAR 0x0028
-#define SLIC_DBAR_SIZE 2048
u32 slic_cbar; /* Xmt Cmd buf addr regs.*/
/*
@@ -329,14 +288,9 @@ struct slic_regs {
* 4-0 - length of cmd in multiples of 32 bytes
* Buffers are 32 bytes up to 512 bytes long
*/
-#define SLIC_CBAR 0x0030
-#define SLIC_CBAR_LEN_MSK 0x0000001F
-#define SLIC_CBAR_ALIGN 0x00000020
u32 slic_wcs; /* write control store*/
#define SLIC_WCS 0x0034
-#define SLIC_WCS_START 0x80000000 /*Start the SLIC (Jump to WCS)*/
-#define SLIC_WCS_COMPARE 0x40000000 /* Compare with value in WCS*/
u32 slic_rbar; /* Response buffer address reg.*/
u32 pad7;
@@ -345,33 +299,24 @@ struct slic_regs {
* 7-0 - number of buffers passed
* Buffers are 32 bytes long on 32-byte boundaries.
*/
-#define SLIC_RBAR 0x0038
-#define SLIC_RBAR_CNT_MSK 0x000000FF
-#define SLIC_RBAR_SIZE 32
u32 slic_stats; /* read statistics (UPR) */
u32 pad8;
-#define SLIC_RSTAT 0x0040
u32 slic_rlsr; /* read link status */
u32 pad9;
-#define SLIC_LSTAT 0x0048
u32 slic_wmcfg; /* Write Mac Config */
u32 pad10;
-#define SLIC_WMCFG 0x0050
u32 slic_wphy; /* Write phy register */
u32 pad11;
-#define SLIC_WPHY 0x0058
u32 slic_rcbar; /* Rcv Cmd buf addr reg */
u32 pad12;
-#define SLIC_RCBAR 0x0060
u32 slic_rconfig; /* Read SLIC Config*/
u32 pad13;
-#define SLIC_RCONFIG 0x0068
u32 slic_intagg; /* Interrupt aggregation time */
u32 pad14;
@@ -379,117 +324,88 @@ struct slic_regs {
u32 slic_wxcfg; /* Write XMIT config reg*/
u32 pad16;
-#define SLIC_WXCFG 0x0078
u32 slic_wrcfg; /* Write RCV config reg*/
u32 pad17;
-#define SLIC_WRCFG 0x0080
u32 slic_wraddral; /* Write rcv addr a low*/
u32 pad18;
-#define SLIC_WRADDRAL 0x0088
u32 slic_wraddrah; /* Write rcv addr a high*/
u32 pad19;
-#define SLIC_WRADDRAH 0x0090
u32 slic_wraddrbl; /* Write rcv addr b low*/
u32 pad20;
-#define SLIC_WRADDRBL 0x0098
u32 slic_wraddrbh; /* Write rcv addr b high*/
u32 pad21;
-#define SLIC_WRADDRBH 0x00a0
u32 slic_mcastlow; /* Low bits of mcast mask*/
u32 pad22;
-#define SLIC_MCASTLOW 0x00a8
u32 slic_mcasthigh; /* High bits of mcast mask*/
u32 pad23;
-#define SLIC_MCASTHIGH 0x00b0
u32 slic_ping; /* Ping the card*/
u32 pad24;
-#define SLIC_PING 0x00b8
u32 slic_dump_cmd; /* Dump command */
u32 pad25;
-#define SLIC_DUMP_CMD 0x00c0
u32 slic_dump_data; /* Dump data pointer */
u32 pad26;
-#define SLIC_DUMP_DATA 0x00c8
u32 slic_pcistatus; /* Read card's pci_status register */
u32 pad27;
-#define SLIC_PCISTATUS 0x00d0
u32 slic_wrhostid; /* Write hostid field */
u32 pad28;
-#define SLIC_WRHOSTID 0x00d8
#define SLIC_RDHOSTID_1GB 0x1554
#define SLIC_RDHOSTID_2GB 0x1554
u32 slic_low_power; /* Put card in a low power state */
u32 pad29;
-#define SLIC_LOW_POWER 0x00e0
u32 slic_quiesce; /* force slic into quiescent state
* before soft reset
*/
u32 pad30;
-#define SLIC_QUIESCE 0x00e8
u32 slic_reset_iface;/* reset interface queues */
u32 pad31;
-#define SLIC_RESET_IFACE 0x00f0
u32 slic_addr_upper;/* Bits 63-32 for host i/f addrs */
u32 pad32;
-#define SLIC_ADDR_UPPER 0x00f8 /*Register is only written when it has changed*/
u32 slic_hbar64; /* 64 bit Header buffer address reg */
u32 pad33;
-#define SLIC_HBAR64 0x0100
u32 slic_dbar64; /* 64 bit Data buffer handle & address reg */
u32 pad34;
-#define SLIC_DBAR64 0x0108
u32 slic_cbar64; /* 64 bit Xmt Cmd buf addr regs. */
u32 pad35;
-#define SLIC_CBAR64 0x0110
u32 slic_rbar64; /* 64 bit Response buffer address reg.*/
u32 pad36;
-#define SLIC_RBAR64 0x0118
u32 slic_rcbar64; /* 64 bit Rcv Cmd buf addr reg*/
u32 pad37;
-#define SLIC_RCBAR64 0x0120
u32 slic_stats64; /* read statistics (64 bit UPR) */
u32 pad38;
-#define SLIC_RSTAT64 0x0128
u32 slic_rcv_wcs; /*Download Gigabit RCV sequencer ucode*/
u32 pad39;
-#define SLIC_RCV_WCS 0x0130
-#define SLIC_RCVWCS_BEGIN 0x40000000
-#define SLIC_RCVWCS_FINISH 0x80000000
u32 slic_wrvlanid; /* Write VlanId field */
u32 pad40;
-#define SLIC_WRVLANID 0x0138
u32 slic_read_xf_info; /* Read Transformer info */
u32 pad41;
-#define SLIC_READ_XF_INFO 0x0140
u32 slic_write_xf_info; /* Write Transformer info */
u32 pad42;
-#define SLIC_WRITE_XF_INFO 0x0148
u32 RSVD1; /* TOE Only */
u32 pad43;
@@ -505,7 +421,6 @@ struct slic_regs {
u32 slic_ticks_per_sec; /* Write card ticks per second */
u32 pad47;
-#define SLIC_TICKS_PER_SEC 0x0170
};
enum UPR_REQUEST {
@@ -616,19 +531,6 @@ struct slic_stats {
} u;
};
-#define xmit_tcp_segs100 u.stats_100.xmt100.xmit_tcp_segs
-#define xmit_tcp_bytes100 u.stats_100.xmt100.xmit_tcp_bytes
-#define xmit_bytes100 u.stats_100.xmt100.xmit_bytes
-#define xmit_collisions100 u.stats_100.xmt100.xmit_collisions
-#define xmit_unicasts100 u.stats_100.xmt100.xmit_unicasts
-#define xmit_other_error100 u.stats_100.xmt100.xmit_other_error
-#define xmit_excess_collisions100 u.stats_100.xmt100.xmit_excess_collisions
-#define rcv_tcp_segs100 u.stats_100.rcv100.rcv_tcp_segs
-#define rcv_tcp_bytes100 u.stats_100.rcv100.rcv_tcp_bytes
-#define rcv_bytes100 u.stats_100.rcv100.rcv_bytes
-#define rcv_unicasts100 u.stats_100.rcv100.rcv_unicasts
-#define rcv_other_error100 u.stats_100.rcv100.rcv_other_error
-#define rcv_drops100 u.stats_100.rcv100.rcv_drops
#define xmit_tcp_segs_gb u.stats_GB.xmtGB.xmit_tcp_segs
#define xmit_tcp_bytes_gb u.stats_GB.xmtGB.xmit_tcp_bytes
#define xmit_bytes_gb u.stats_GB.xmtGB.xmit_bytes
@@ -648,13 +550,6 @@ struct slic_config_mac {
u8 macaddrA[6];
};
-#define ATK_FRU_FORMAT 0x00
-#define VENDOR1_FRU_FORMAT 0x01
-#define VENDOR2_FRU_FORMAT 0x02
-#define VENDOR3_FRU_FORMAT 0x03
-#define VENDOR4_FRU_FORMAT 0x04
-#define NO_FRU_FORMAT 0xFF
-
struct atk_fru {
u8 assembly[6];
u8 revision[2];
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 6d50fc4..a33eca0 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -55,13 +55,9 @@
*/
#define KLUDGE_FOR_4GB_BOUNDARY 1
-#define DEBUG_MICROCODE 1
-#define DBG 1
#define SLIC_INTERRUPT_PROCESS_LIMIT 1
#define SLIC_OFFLOAD_IP_CHECKSUM 1
-#define STATS_TIMER_INTERVAL 2
#define PING_TIMER_INTERVAL 1
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/string.h>
@@ -102,17 +98,12 @@ static char *slic_banner = "Alacritech SLIC Technology(tm) Server and Storage Ac
static char *slic_proc_version = "2.0.351 2006/07/14 12:26:00";
static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
-#define DEFAULT_INTAGG_DELAY 100
static unsigned int rcv_count;
#define DRV_NAME "slicoss"
-#define DRV_VERSION "2.0.1"
#define DRV_AUTHOR "Alacritech, Inc. Engineering"
#define DRV_DESCRIPTION "Alacritech SLIC Techonology(tm) "\
"Non-Accelerated Driver"
-#define DRV_COPYRIGHT "Copyright 2000-2006 Alacritech, Inc. "\
- "All rights reserved."
-#define PFX DRV_NAME " "
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESCRIPTION);
@@ -1339,7 +1330,7 @@ static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
pslic_handle->next = NULL;
cmd->pslic_handle = pslic_handle;
- cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
+ cmd->cmd64.hosthandle = pslic_handle->token.handle.whole;
cmd->busy = false;
cmd->paddrl = phys_addrl;
cmd->paddrh = phys_addrh;
@@ -1992,9 +1983,6 @@ static void slic_rcv_handle_error(struct adapter *adapter,
}
}
-#define TCP_OFFLOAD_FRAME_PUSHFLAG 0x10000000
-#define M_FAST_PATH 0x0040
-
static void slic_rcv_handler(struct adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -2059,10 +2047,10 @@ static void slic_xmit_complete(struct adapter *adapter)
/*
* Get the complete host command buffer
*/
- slic_handle_word.handle_token = rspbuf->hosthandle;
+ slic_handle_word.handle.whole = rspbuf->hosthandle;
hcmd =
- adapter->slic_handles[slic_handle_word.handle_index].
- address;
+ adapter->slic_handles[
+ slic_handle_word.handle.parts.index].address;
/* hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
if (hcmd->type == SLIC_CMD_DUMB) {
if (hcmd->skb)
@@ -2927,7 +2915,7 @@ static void slic_init_adapter(struct net_device *netdev,
for (index = 1, pslic_handle = &adapter->slic_handles[1];
index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
- pslic_handle->token.handle_index = index;
+ pslic_handle->token.handle.parts.index = index;
pslic_handle->type = SLIC_HANDLE_FREE;
pslic_handle->next = adapter->pfree_slic_handles;
adapter->pfree_slic_handles = pslic_handle;
--
2.8.0