Re: [PATCH 1/1] pinctrl: tegra: avoid parked_reg and parked_bank

[Rhyland Klein]

On 5/2/2016 10:28 AM, Laxman Dewangan wrote:
> NVIDIA's Tegra210 support the park bit to make pinmux configuration
> enable/disable. If parked bit is 1 then configuration does not apply
> and if it is 0 then pinmux configuration applies. This is to support
> to avoid any glitch in pinmux configurations.
> 
> The parked bit is part of mux register and mux bank and hence it is
> not required to have member for the parked_reg and parked bank very
> similar to other bit field of the same register.
> 
> Remove the need of the parked register and parked bank and get whether
> parked function supported or not by parked_bit.
> 
> This is to make the parked bit handling same as other fields of mux
> registers.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> ---
>  drivers/pinctrl/tegra/pinctrl-tegra.c    | 8 ++++----
>  drivers/pinctrl/tegra/pinctrl-tegra.h    | 6 +-----
>  drivers/pinctrl/tegra/pinctrl-tegra114.c | 4 ++--
>  drivers/pinctrl/tegra/pinctrl-tegra124.c | 4 ++--
>  drivers/pinctrl/tegra/pinctrl-tegra20.c  | 4 ++--
>  drivers/pinctrl/tegra/pinctrl-tegra210.c | 4 +---
>  drivers/pinctrl/tegra/pinctrl-tegra30.c  | 4 ++--
>  7 files changed, 14 insertions(+), 20 deletions(-)
> 

These drivers are generated (with the exception of Tegra20) by the
tegra-pinmux-scripts hosted at :
https://github.com/NVIDIA/tegra-pinmux-scripts.git. Did you generate a
patch there so that the changes to pinctrl-tegra[114|124|210|30].c are
consistent there? If not you probably should.

-rhyland

-- 
nvpublic