Re: [PATCHv2] musb_host: fix lockup on rxcsr_h_error

[Yegor Yefremov]

On Thu, Apr 28, 2016 at 4:37 PM, Bin Liu <b-liu@xxxxxx> wrote:
> Hi,
>
> On Thu, Apr 28, 2016 at 09:51:37AM +0300, Maxim Uvarov wrote:
>
> [snip]
>
>> Hello Bin,
>>
>> yes, it also works with that reset and go to finish:
>>
>> diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
>> index c3d5fc9..8cd98e7 100644
>> --- a/drivers/usb/musb/musb_host.c
>> +++ b/drivers/usb/musb/musb_host.c
>> @@ -1599,6 +1599,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
>>                 status = -EPROTO;
>>                 musb_writeb(epio, MUSB_RXINTERVAL, 0);
>>
>> +               rx_csr &= ~MUSB_RXCSR_H_ERROR;
>> +               musb_writew(epio, MUSB_RXCSR, rx_csr);
>> +
>> +               goto finish;
>>         } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
>>
>>                 if (USB_ENDPOINT_XFER_ISOC != qh->type) {
>>
>
> Thanks for testing it.

Have tested your patch and now both FT4232 and Huawei don't freeze on removal.

Bin, Max thanks for fixing this issue.

Tested-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>

>> That I think a key thing, which is done in other error. If that change
>> is good for you than I'm also happy with it.
>
> We need to understand why the controller keeps generating the same
> interrupt to come out a proper fix.
>
> I will take a look. But I can only use my spare time on this, so be
> patient.
>
>>
>> I also not sure if musb_writeb(epio, MUSB_RXINTERVAL, 0); is needed.
>> In my case it's the same result with it and without it.
>> In other scenarios might be reasonable...
>
> It disables NAK timeout.
>
>>
>>
>> > First of all, I don't like the idea of merging the two branches, it
>> > makes the code ugly.
>>
>> Yes, I don't like that function at all, it's too long and difficult to
>> read if you first look on it first time. It will be good to split it
>> on 3 small functions for each big if.
>
> This particular function is not that hard to understand, but the driver
> in general is messy. But I am not sure if anyone in the community can
> refactory this driver. The community had some effort in the past to
> clean up this driver, but it always broke usecases on different
> platforms.
>
> Regards,
> -Bin.