[tip:x86/platform] x86/platform/UV: Remove Obsolete GRU MMR address translation

[tip-bot for Dimitri Sivanich]

Commit-ID:  40bfb8eedf1e7fa0535c685ff1000c05bcf7a637
Gitweb:     http://git.kernel.org/tip/40bfb8eedf1e7fa0535c685ff1000c05bcf7a637
Author:     Dimitri Sivanich <sivanich@xxxxxxx>
AuthorDate: Fri, 29 Apr 2016 16:54:22 -0500
Committer:  Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Wed, 4 May 2016 08:48:51 +0200

x86/platform/UV: Remove Obsolete GRU MMR address translation

Use no-op messages in place of cross-partition interrupts when nacking a
put message in the GRU.  This allows us to remove MMR's as a destination
from the GRU driver.

Tested-by: John Estabrook <estabrook@xxxxxxx>
Tested-by: Gary Kroening <gfk@xxxxxxx>
Tested-by: Nathan Zimmer <nzimmer@xxxxxxx>
Signed-off-by: Dimitri Sivanich <sivanich@xxxxxxx>
Signed-off-by: Mike Travis <travis@xxxxxxx>
Cc: Andrew Banman <abanman@xxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Brian Gerst <brgerst@xxxxxxxxx>
Cc: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Len Brown <len.brown@xxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Russ Anderson <rja@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Link: http://lkml.kernel.org/r/20160429215406.012228480@xxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
 arch/x86/include/asm/uv/uv_hub.h    | 10 ----------
 drivers/misc/sgi-gru/grukservices.c | 38 +++++++++++++++++++++----------------
 2 files changed, 22 insertions(+), 26 deletions(-)

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index ae979f7..097b80c 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -647,16 +647,6 @@ static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset
 	return readq(uv_global_mmr64_address(pnode, offset));
 }
 
-/*
- * Global MMR space addresses when referenced by the GRU. (GRU does
- * NOT use socket addressing).
- */
-static inline unsigned long uv_global_gru_mmr_address(int pnode, unsigned long offset)
-{
-	return UV_GLOBAL_GRU_MMR_BASE | offset |
-		((unsigned long)pnode << uv_hub_info->m_val);
-}
-
 static inline void uv_write_global_mmr8(int pnode, unsigned long offset, unsigned char val)
 {
 	writeb(val, uv_global_mmr64_address(pnode, offset));
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 967b9dd..0307690 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -718,8 +718,8 @@ cberr:
 static int send_message_put_nacked(void *cb, struct gru_message_queue_desc *mqd,
 			void *mesg, int lines)
 {
-	unsigned long m, *val = mesg, gpa, save;
-	int ret;
+	unsigned long m;
+	int ret, loops = 200;	/* experimentally determined */
 
 	m = mqd->mq_gpa + (gru_get_amo_value_head(cb) << 6);
 	if (lines == 2) {
@@ -735,22 +735,28 @@ static int send_message_put_nacked(void *cb, struct gru_message_queue_desc *mqd,
 		return MQE_OK;
 
 	/*
-	 * Send a cross-partition interrupt to the SSI that contains the target
-	 * message queue. Normally, the interrupt is automatically delivered by
-	 * hardware but some error conditions require explicit delivery.
-	 * Use the GRU to deliver the interrupt. Otherwise partition failures
+	 * Send a noop message in order to deliver a cross-partition interrupt
+	 * to the SSI that contains the target message queue. Normally, the
+	 * interrupt is automatically delivered by hardware following mesq
+	 * operations, but some error conditions require explicit delivery.
+	 * The noop message will trigger delivery. Otherwise partition failures
 	 * could cause unrecovered errors.
 	 */
-	gpa = uv_global_gru_mmr_address(mqd->interrupt_pnode, UVH_IPI_INT);
-	save = *val;
-	*val = uv_hub_ipi_value(mqd->interrupt_apicid, mqd->interrupt_vector,
-				dest_Fixed);
-	gru_vstore_phys(cb, gpa, gru_get_tri(mesg), IAA_REGISTER, IMA);
-	ret = gru_wait(cb);
-	*val = save;
-	if (ret != CBS_IDLE)
-		return MQE_UNEXPECTED_CB_ERR;
-	return MQE_OK;
+	do {
+		ret = send_noop_message(cb, mqd, mesg);
+	} while ((ret == MQIE_AGAIN || ret == MQE_CONGESTION) && (loops-- > 0));
+
+	if (ret == MQIE_AGAIN || ret == MQE_CONGESTION) {
+		/*
+		 * Don't indicate to the app to resend the message, as it's
+		 * already been successfully sent.  We simply send an OK
+		 * (rather than fail the send with MQE_UNEXPECTED_CB_ERR),
+		 * assuming that the other side is receiving enough
+		 * interrupts to get this message processed anyway.
+		 */
+		ret = MQE_OK;
+	}
+	return ret;
 }
 
 /*