On Wed, May 04, 2016 at 10:35:23PM +0800, David Wu wrote:
The bus clock and function clock are separated at rk3399,
and others use one clock as the bus clock and function clock.
Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
index 0b4a85f..82b6f6b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
@@ -6,10 +6,20 @@ RK3xxx SoCs.
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
- "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
+ - compatible: should be one of the followings
s/followings/following:/
+ - "rockchip,rk3066-i2c": for rk3066
+ - "rockchip,rk3188-i2c": for rk3188
+ - "rockchip,rk3228-i2c": for rk3228
+ - "rockchip,rk3288-i2c": for rk3288
+ - "rockchip,rk3399-i2c": for rk3399
- interrupts : interrupt number
- - clocks : parent clock
+ - clocks: See ../clock/clock-bindings.txt
+ - For older hardware (rk3066, rk3188, rk3228, rk3288):
+ - There is one clock that's used both to derive the functional clock
+ for the device and as the bus clock. REQUIRED.
This is the required section, so REQUIRED is redundant.
+ - For newer hardware (rk3399): specify by name
+ - "i2c": REQUIRED. This is used to derive the functional clock.
+ - "pclk": REQUIRED. This is the bus clock.equired on RK3066, RK3188 :
This doesn't make sense. The first line says this applies to rk3399, but
then here it is talking about other parts.
And there's a typo.
Required on RK3066, RK3188 :
--
1.9.1