Re: usb: dwc2: regression on MyBook Live Duo / Canyonlands since 4.3.0-rc4

[Felipe Balbi]

Hi,

Arnd Bergmann <arnd@xxxxxxxx> writes:
> On Monday 09 May 2016 10:23:22 Benjamin Herrenschmidt wrote:
>> On Sun, 2016-05-08 at 13:44 +0200, Christian Lamparter wrote:
>> > On Sunday, May 08, 2016 08:40:55 PM Benjamin Herrenschmidt wrote:
>> > > 
>> > > On Sun, 2016-05-08 at 00:54 +0200, Christian Lamparter via Linuxppc-dev 
>> > > wrote:
>> > > > 
>> > > > I've been looking in getting the MyBook Live Duo's USB OTG port
>> > > > to function. The SoC is a APM82181. Which has a PowerPC 464 core
>> > > > and related to the supported canyonlands architecture in
>> > > > arch/powerpc/.
>> > > > 
>> > > > Currently in -next the dwc2 module doesn't load: 
>> > > Smells like the APM implementation is little endian. You might need to
>> > > use a flag to indicate what endian to use instead and set it
>> > > appropriately based on some DT properties.
>> > I tried. As per common-properties[0], I added little-endian; but it has no
>> > effect. I looked in dwc2_driver_probe and found no way of specifying the
>> > endian of the device. It all comes down to the dwc2_readl & dwc2_writel
>> > accessors. These - sadly - have been hardwired to use __raw_readl and
>> > __raw_writel. So, it's always "native-endian". While common-properties
>> > says little-endian should be preferred.
>> 
>> Right, I meant, you should produce a patch adding a runtime test inside
>> those functions based on a device-tree property, a bit like we do for
>> some of the HCDs like OHCI, EHCI etc...
>> 
>> 
>
> The patch that caused the problem had multiple issues:
>
> - it broke big-endian ARM kernels: any machine that was working
>   correctly with a little-endian kernel is no longer using byteswaps
>   on big-endian kernels, which clearly breaks them.
> - On PowerPC the same thing must be true: if it was working before,
>   using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC
>   usually uses big-endian kernels, so they are likely all broken.
> - The barrier for dwc2_writel is on the wrong side of the __raw_writel(),
>   so the MMIO no longer synchronizes with DMA operations.
> - On architectures that require specific CPU instructions for MMIO
>   access, using the __raw_ variant may turn this into a pointer
>   dereference that does not have the same effect as the readl/writel.
>
> I think we can simply make this set of accessors architecture-dependent
> (MIPS vs. the rest of the world) to revert ARM and PowerPC back to
> the working version.

and patch all drivers similarly? Shouldn't arch/mips itself deal with it
and hide it from drivers ?

-- 
balbi

Attachment: signature.asc
Description: PGP signature