Re: [RFC PATCH 0/2] net: threadable napi poll loop

[Paolo Abeni]

On Tue, 2016-05-10 at 17:57 +0200, Thomas Gleixner wrote:
> On Tue, 10 May 2016, Paolo Abeni wrote:
> 
> Nice patch set and very promising results! 
> 
> > At this point we are not really sure if we should go with this simpler
> > approach by putting NAPI itself into kthreads or leverage the threadirqs
> > function by putting the whole interrupt into a thread and signaling NAPI
> > that it does not reschedule itself in a softirq but to simply run at
> > this particular context of the interrupt handler.
> > 
> > While the threaded irq way seems to better integrate into the kernel and
> > also other devices could move their interrupts into the threads easily
> > on a common policy, we don't know how to really express the necessary
> > knobs with the current device driver model (module parameters, sysfs
> > attributes, etc.). This is where we would like to hear some opinions.
> > NAPI would e.g. have to query the kernel if the particular IRQ/MSI if it
> > should be scheduled in a softirq or in a thread, so we don't have to
> > rewrite all device drivers. This might even be needed on a per rx-queue
> > granularity.
> 
> Utilizing threaded irqs should be halfways simple even without touching the
> device driver at all.
> 
> We can do the switch to threading in two ways:
> 
> 1) Let the driver request the interrupt(s) as it does now and then have a
>    /proc/irq/NNN/threaded file which converts it to a threaded interrupt on
>    the fly. That should be fairly trivial.
> 
> 2) Let the driver request the interrupt(s) as it does now and retrieve the
>    interrupt number which belongs to the device/queue from the network core
>    and let the irq core switch it over to threaded.

Thank you for the feedback.

We actually experimented something similar to (2). In our implementation
we needed a per device chunk of code to do the actual irq number ->
queue mapping (and than we performed as well the switch in the device
code).

> You surely need some way to figure out whether the interrupt is threaded when
> you set up the device in order to flag your napi struct, but that should be
> not too hard to achieve.

This is the part that required per device changes and complicated a bit
the implementation. We can research further to simplify it, according to
the overall discussion.

Cheers,

Paolo