[PATCH RFC v3 0/4] new bus type SIOX
From: Uwe Kleine-KÃnig
Date: Wed May 11 2016 - 03:01:13 EST
Hello,
this is v3 of the series, the only change is a rebase to a newer
mainline tree (didn't check if this resulted in any changes, worked
without problems) and I added commit logs and sign-offs.
So the open issues still apply which I list here again:
- no device tree binding doc for bus master driver (patch 2)
I will clean this up eventually when (and if) patch 1 gets in.
- the devices should be polled each 25 ms, otherwise a per-device
watchdog resets the device. I'm currently using a workqueue for that,
and on a loaded machine sometimes the watchdog triggers. So maybe I
need a different approach here? But I didn't debug that yet, so this
is just FYI.
Patches 2 and 3 are only to show how patch 1 is intended to be used and
I'd need to rework patch 2 before it can go in and patch 3 probably
needs to go via the gpio tree, but I didn't care to cc the right people
as this series is mainly about patch 1.
Looking forward to feedback
Uwe Kleine-KÃnig
Uwe Kleine-KÃnig (4):
siox: new driver framework for eckelmann SIOX
siox: add gpio bus driver
gpio: new driver to work with a 8x12 siox
siox: add support for tracing
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/gpio/Kconfig | 5 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-siox.c | 290 ++++++++++++++++++
drivers/siox/Kconfig | 9 +
drivers/siox/Makefile | 2 +
drivers/siox/siox-bus-gpio.c | 175 +++++++++++
drivers/siox/siox-core.c | 686 +++++++++++++++++++++++++++++++++++++++++++
drivers/siox/siox.h | 52 ++++
include/linux/siox.h | 61 ++++
include/trace/events/siox.h | 60 ++++
12 files changed, 1344 insertions(+)
create mode 100644 drivers/gpio/gpio-siox.c
create mode 100644 drivers/siox/Kconfig
create mode 100644 drivers/siox/Makefile
create mode 100644 drivers/siox/siox-bus-gpio.c
create mode 100644 drivers/siox/siox-core.c
create mode 100644 drivers/siox/siox.h
create mode 100644 include/linux/siox.h
create mode 100644 include/trace/events/siox.h
--
2.8.0.rc3