Re: [PATCH v7 1/5] usb: dwc3: omap: use request_threaded_irq()

[Roger Quadros]

Felipe,

On 10/05/16 13:12, Felipe Balbi wrote:
> 
> Hi,
> 
> Roger Quadros <rogerq@xxxxxx> writes:
>>>> @@ -497,8 +503,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
>>>>  	/* check the DMA Status */
>>>>  	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
>>>>  
>>>> -	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
>>>> -			"dwc3-omap", omap);
>>>> +	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
>>>> +					NULL, 0, "dwc3-omap", omap);
>>>
>>> if you're using threaded_irq, it's better to have a NULL top half and
>>> valid bottom half.
>>
>> But in this case we don't need a bottom half as there is nothing to do :).
>>
>>>
>>> In fact, since this will be shared, you could do a proper preparation
>>> and on top half check if $this device generated the IRQ and
>>> conditionally schedule the bottom half. Don't forget to mask device's
>>> interrupts from top half so you can run without IRQF_ONESHOT.
>>>
>>
>> Why do this at all if there is nothing to do in the bottom half?
> 
> oh, but there is :-)
> 
> The whole idea of threaded IRQs is that you spend as little time as
> possible on top half and the (strong) recommendation is that you *only*
> check if $this device generated the interrupt. Note that "checking if
> $this device generated the interrupt" will be mandatory as soon as you
> mark the IRQ line as shared ;-)
> 
> So here's how this should look like:
> 
> static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
> {
>         struct dwc3_omap *omap = _omap;
>         u32 reg;
> 
>         reg = readl(IRQSTATUS)
>         if (reg) {
>                 mask_interrupts(omap);
>         	return IRQ_WAKE_THREAD;
>         }
> 
> 	return IRQ_HANDLED;

This should be IRQ_NONE right?

> }
> 
> static irqreturn_t dwc3_omap_threaded_interrupt(int irq, void *_omap)
> {
>         struct dwc3_omap *omap = _omap;
>         u32 reg;
> 
>         spin_lock(&omap->lock);

Do we really need a spin_lock for the dwc3-omap driver?
Currently we won't be doing anything other than just
clearing the irqstatus and re-enabling the interrupts.


>         reg = readl(IRQSTATUS);
> 
>         if (reg & BIT0)
>         	handle_bit_0(omap);
> 
> 	if (reg & BIT1)
>         	handle_bit_1(omap);
> 
> 	unmask_interrupts(omap);
> 	spin_unlock(&omap->lock);
> 
> 	return IRQ_HANDLED;
> }
> 
> this will *always* behave well with RT and non-RT kernels. It also
> allows for the user to change priorities on these interrupt handlers if
> necessary.
> 

--
cheers,
-roger