[PATCH 3/7] x86/mce/AMD: Save an indentation level in prepare_threshold_block()

From: Borislav Petkov
Date: Wed May 11 2016 - 08:58:49 EST


From: Borislav Petkov <bp@xxxxxxx>

Do the !SMCA work first and then save us an indentation level for the
SMCA code.

No functionality change.

Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@xxxxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: linux-edac <linux-edac@xxxxxxxxxxxxxxx>
Cc: x86-ml <x86@xxxxxxxxxx>
Cc: Yazen Ghannam <Yazen.Ghannam@xxxxxxx>
---
arch/x86/kernel/cpu/mcheck/mce_amd.c | 78 ++++++++++++++++++------------------
1 file changed, 38 insertions(+), 40 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 527ddae3017b..10b0661651e0 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -343,6 +343,7 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
int offset, u32 misc_high)
{
unsigned int cpu = smp_processor_id();
+ u32 smca_low, smca_high, smca_addr;
struct threshold_block b;
int new;

@@ -361,52 +362,49 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,

b.interrupt_enable = 1;

- if (mce_flags.smca) {
- u32 smca_low, smca_high;
- u32 smca_addr = MSR_AMD64_SMCA_MCx_CONFIG(bank);
-
- if (!rdmsr_safe(smca_addr, &smca_low, &smca_high)) {
- /*
- * OS is required to set the MCAX bit to acknowledge
- * that it is now using the new MSR ranges and new
- * registers under each bank. It also means that the OS
- * will configure deferred errors in the new MCx_CONFIG
- * register. If the bit is not set, uncorrectable errors
- * will cause a system panic.
- *
- * MCA_CONFIG[MCAX] is bit 32 (0 in the high portion of
- * the MSR.)
- */
- smca_high |= BIT(0);
+ if (!mce_flags.smca) {
+ new = (misc_high & MASK_LVTOFF_HI) >> 20;
+ goto set_offset;
+ }

- /*
- * SMCA logs Deferred Error information in
- * MCA_DE{STAT,ADDR} registers with the option of
- * additionally logging to MCA_{STATUS,ADDR} if
- * MCA_CONFIG[LogDeferredInMcaStat] is set.
- *
- * This bit is usually set by BIOS to retain the old
- * behavior for OSes that don't use the new registers.
- * Linux supports the new registers so let's disable
- * that additional logging here.
- *
- * MCA_CONFIG[LogDeferredInMcaStat] is bit 34 (bit 2 in
- * the high portion of the MSR).
- */
- smca_high &= ~BIT(2);
+ smca_addr = MSR_AMD64_SMCA_MCx_CONFIG(bank);

- wrmsr(smca_addr, smca_low, smca_high);
- }
+ if (!rdmsr_safe(smca_addr, &smca_low, &smca_high)) {
+ /*
+ * OS is required to set the MCAX bit to acknowledge that it is
+ * now using the new MSR ranges and new registers under each
+ * bank. It also means that the OS will configure deferred
+ * errors in the new MCx_CONFIG register. If the bit is not set,
+ * uncorrectable errors will cause a system panic.
+ *
+ * MCA_CONFIG[MCAX] is bit 32 (0 in the high portion of the MSR.)
+ */
+ smca_high |= BIT(0);

- /* Gather LVT offset for thresholding: */
- if (rdmsr_safe(MSR_CU_DEF_ERR, &smca_low, &smca_high))
- goto out;
+ /*
+ * SMCA logs Deferred Error information in MCA_DE{STAT,ADDR}
+ * registers with the option of additionally logging to
+ * MCA_{STATUS,ADDR} if MCA_CONFIG[LogDeferredInMcaStat] is set.
+ *
+ * This bit is usually set by BIOS to retain the old behavior
+ * for OSes that don't use the new registers. Linux supports the
+ * new registers so let's disable that additional logging here.
+ *
+ * MCA_CONFIG[LogDeferredInMcaStat] is bit 34 (bit 2 in the high
+ * portion of the MSR).
+ */
+ smca_high &= ~BIT(2);

- new = (smca_low & SMCA_THR_LVT_OFF) >> 12;
- } else {
- new = (misc_high & MASK_LVTOFF_HI) >> 20;
+ wrmsr(smca_addr, smca_low, smca_high);
}

+ /* Gather LVT offset for thresholding: */
+ if (rdmsr_safe(MSR_CU_DEF_ERR, &smca_low, &smca_high))
+ goto out;
+
+ new = (smca_low & SMCA_THR_LVT_OFF) >> 12;
+
+set_offset:
offset = setup_APIC_mce_threshold(offset, new);

if ((offset == new) && (mce_threshold_vector != amd_threshold_interrupt))
--
2.7.3