Re: [PATCH v2 1/7] powerpc/8xx: Fix vaddr for IMMR early remap

[Scott Wood]

On Wed, 2016-05-11 at 17:03 +0200, Christophe Leroy wrote:
> Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
> 648K rodata, 508K init, 290K bss, 6644K reserved)
> Kernel virtual memory layout:
>   * 0xfffdf000..0xfffff000  : fixmap
>   * 0xfde00000..0xfe000000  : consistent mem
>   * 0xfddf6000..0xfde00000  : early ioremap
>   * 0xc9000000..0xfddf6000  : vmalloc & ioremap
> SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> 
> Today, IMMR is mapped 1:1 at startup
> 
> Mapping IMMR 1:1 is just wrong because it may overlap with another
> area. On most mpc8xx boards it is OK as IMMR is set to 0xff000000
> but for instance on EP88xC board, IMMR is at 0xfa200000 which
> overlaps with VM ioremap area
> 
> This patch fixes the virtual address for remapping IMMR with the fixmap
> regardless of the value of IMMR.
> 
> The size of IMMR area is 256kbytes (CPM at offset 0, security engine
> at offset 128k) so a 512k page is enough
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
> ---
> v2: No change
> 
>  arch/powerpc/include/asm/fixmap.h |  7 +++++++
>  arch/powerpc/kernel/asm-offsets.c |  8 ++++++++
>  arch/powerpc/kernel/head_8xx.S    | 11 ++++++-----
>  arch/powerpc/mm/mmu_decl.h        |  7 +++++++
>  arch/powerpc/sysdev/cpm_common.c  | 15 ++++++++++++---
>  5 files changed, 40 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/fixmap.h
> b/arch/powerpc/include/asm/fixmap.h
> index 90f604b..4508b32 100644
> --- a/arch/powerpc/include/asm/fixmap.h
> +++ b/arch/powerpc/include/asm/fixmap.h
> @@ -51,6 +51,13 @@ enum fixed_addresses {
>  	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel
> mappings */
>  	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
>  #endif
> +#ifdef CONFIG_PPC_8xx
> +	/* For IMMR we need an aligned 512K area */
> +#define FIX_IMMR_SIZE	(512 * 1024 / PAGE_SIZE)
> +	FIX_IMMR_START,
> +	FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
> +
> +		       FIX_IMMR_SIZE,
> +#endif

What happens if FIX_IMMR_START is, for example, 0x100?  Then
"__ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1" would be 0xff -- you've
gone backwards.  FIX_IMMR_BASE would be 0x17f, translating to an address of
0xffe80000.  IMMR would end at 0xfff00000.  The kmap range would begin at
0xffeff000 and you'd have an overlap.

I think what you want is:
	FIX_IMMR_BASE = (FIX_IMMR_START & ~(FIX_IMMR_SIZE - 1)) + 
			FIX_IMMR_SIZE - 1,


>  	/* FIX_PCIE_MCFG, */
>  	__end_of_fixed_addresses
>  };
> diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm
> -offsets.c
> index 9ea0955..2652233 100644
> --- a/arch/powerpc/kernel/asm-offsets.c
> +++ b/arch/powerpc/kernel/asm-offsets.c
> @@ -68,6 +68,10 @@
>  #include "../mm/mmu_decl.h"
>  #endif
>  
> +#ifdef CONFIG_PPC_8xx
> +#include <asm/fixmap.h>
> +#endif
> +
>  int main(void)
>  {
>  	DEFINE(THREAD, offsetof(struct task_struct, thread));
> @@ -783,5 +787,9 @@ int main(void)
>  
>  	DEFINE(PPC_DBELL_SERVER, PPC_DBELL_SERVER);
>  
> +#ifdef CONFIG_PPC_8xx
> +	DEFINE(VIRT_IMMR_BASE, __fix_to_virt(FIX_IMMR_BASE));
> +#endif
> +
>  	return 0;
>  }
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 80c6947..378a185 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -30,6 +30,7 @@
>  #include <asm/ppc_asm.h>
>  #include <asm/asm-offsets.h>
>  #include <asm/ptrace.h>
> +#include <asm/fixmap.h>
>  
>  /* Macro to make the code more readable. */
>  #ifdef CONFIG_8xx_CPU6
> @@ -763,7 +764,7 @@ start_here:
>   * virtual to physical.  Also, set the cache mode since that is defined
>   * by TLB entries and perform any additional mapping (like of the IMMR).
>   * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
> - * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
> + * 24 Mbytes of data, and the 512k IMMR space.  Anything not covered by
>   * these mappings is mapped by page tables.
>   */
>  initial_mmu:
> @@ -812,7 +813,7 @@ initial_mmu:
>  	ori	r8, r8, MD_APG_INIT@l
>  	mtspr	SPRN_MD_AP, r8
>  
> -	/* Map another 8 MByte at the IMMR to get the processor
> +	/* Map a 512k page for the IMMR to get the processor
>  	 * internal registers (among other things).
>  	 */
>  #ifdef CONFIG_PIN_TLB
> @@ -820,12 +821,12 @@ initial_mmu:
>  	mtspr	SPRN_MD_CTR, r10
>  #endif
>  	mfspr	r9, 638			/* Get current IMMR */
> -	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary
> */
> +	andis.	r9, r9, 0xfff8		/* Get 512 kbytes
> boundary */
>  
> -	mr	r8, r9			/* Create vaddr for TLB */
> +	lis	r8, VIRT_IMMR_BASE@h	/* Create vaddr for TLB */
>  	ori	r8, r8, MD_EVALID	/* Mark it valid */
>  	mtspr	SPRN_MD_EPN, r8
> -	li	r8, MD_PS8MEG		/* Set 8M byte page */
> +	li	r8, MD_PS512K | MD_GUARDED	/* Set 512k byte page
> */
>  	ori	r8, r8, MD_SVALID	/* Make it valid */
>  	mtspr	SPRN_MD_TWC, r8
>  	mr	r8, r9			/* Create paddr for TLB */
> diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
> index 6af6532..a41fab9 100644
> --- a/arch/powerpc/mm/mmu_decl.h
> +++ b/arch/powerpc/mm/mmu_decl.h
> @@ -106,6 +106,13 @@ struct hash_pte;
>  extern struct hash_pte *Hash, *Hash_end;
>  extern unsigned long Hash_size, Hash_mask;
>  
> +#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000)
> +#ifdef CONFIG_PPC_8xx
> +#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
> +#else
> +#define VIRT_IMMR_BASE PHYS_IMMR_BASE
> +#endif

Where could that definition of PHYS_IMMR_BASE possibly be used other than 8xx?
 82xx, 83xx, etc. don't have SPRN_IMMR.

Can you move this into mmu-8xx.h?

> #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> -static u32 __iomem *cpm_udbg_txdesc =
> -	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
> +static u32 __iomem *cpm_udbg_txdesc;
>  
>  static void udbg_putc_cpm(char c)
>  {
> -	u8 __iomem *txbuf = (u8 __iomem __force
> *)in_be32(&cpm_udbg_txdesc[1]);
> +	static u8 __iomem *txbuf;
> +
> +	if (unlikely(txbuf == NULL))
> +		txbuf = (u8 __iomem __force *)
> +			 (in_be32(&cpm_udbg_txdesc[1]) - PHYS_IMMR_BASE +
> +			  VIRT_IMMR_BASE);

You've just broken udbg on 82xx.

Also, please don't use unlikely or other optimizations that make the code
harder to read (such as setting txbuf only if it's NULL) in non-performance
-critical code.
 
>  	if (c == '\n')
>  		udbg_putc_cpm('\r');
> @@ -56,6 +61,10 @@ static void udbg_putc_cpm(char c)
>  
>  void __init udbg_init_cpm(void)
>  {
> +	cpm_udbg_txdesc = (u32 __iomem __force *)
> +			  (CONFIG_PPC_EARLY_DEBUG_CPM_ADDR - PHYS_IMMR_BASE
> +
> +			   VIRT_IMMR_BASE);
> +
>  	if (cpm_udbg_txdesc) {

If there's an init function why are you doing init-on-first-use in
udbg_putc_cpm()?

-Scott