[PATCH V4 5/9] irqchip/gic: Isolate early GIC initialisation code
From: Jon Hunter
Date: Thu May 12 2016 - 11:20:29 EST
To re-use the code that initialises the GIC (found in
__gic_init_bases()), from within a platform driver, it is necessary to
move the code from the __init section so that it is always present and
not removed. Unfortunately, it is not possible to simply drop the __init
from the function declaration for __gic_init_bases() because it contains
calls to set_smp_cross_call() and set_handle_irq() which are both
located in the __init section. Fortunately, these calls are only
required for the root controller and because the initial platform driver
will only support non-root controllers that can be initialised later in
the boot process, we can move these calls to another function.
Move the bulk of the code from __gic_init_bases() to a new function
called gic_init_bases() which is not located in the __init section and
can be used by the platform driver. Update __gic_init_bases() to call
gic_init_bases() and if necessary, set_smp_cross_call() and
set_handle_irq().
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
drivers/irqchip/irq-gic.c | 55 +++++++++++++++++++++++++++--------------------
1 file changed, 32 insertions(+), 23 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 113e2d02c812..58ef17fa23a3 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -1029,14 +1029,11 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.unmap = gic_irq_domain_unmap,
};
-static int __init __gic_init_bases(struct gic_chip_data *gic, int irq_start,
- struct fwnode_handle *handle)
+static int gic_init_bases(struct gic_chip_data *gic, int irq_start,
+ struct fwnode_handle *handle)
{
irq_hw_number_t hwirq_base;
- int gic_irqs, irq_base, i, ret;
-
- if (WARN_ON(!gic || gic->domain))
- return -EINVAL;
+ int gic_irqs, irq_base, ret;
gic_check_cpu_features();
@@ -1137,23 +1134,6 @@ static int __init __gic_init_bases(struct gic_chip_data *gic, int irq_start,
goto error;
}
- if (gic == &gic_data[0]) {
- /*
- * Initialize the CPU interface map to all CPUs.
- * It will be refined as each CPU probes its ID.
- * This is only necessary for the primary GIC.
- */
- for (i = 0; i < NR_GIC_CPU_IF; i++)
- gic_cpu_map[i] = 0xff;
-#ifdef CONFIG_SMP
- set_smp_cross_call(gic_raise_softirq);
- register_cpu_notifier(&gic_cpu_notifier);
-#endif
- set_handle_irq(gic_handle_irq);
- if (static_key_true(&supports_deactivate))
- pr_info("GIC: Using split EOI/Deactivate mode\n");
- }
-
gic_dist_init(gic);
ret = gic_cpu_init(gic);
if (ret)
@@ -1176,6 +1156,35 @@ error:
return ret;
}
+static int __init __gic_init_bases(struct gic_chip_data *gic,
+ int irq_start,
+ struct fwnode_handle *handle)
+{
+ int i;
+
+ if (WARN_ON(!gic || gic->domain))
+ return -EINVAL;
+
+ if (gic == &gic_data[0]) {
+ /*
+ * Initialize the CPU interface map to all CPUs.
+ * It will be refined as each CPU probes its ID.
+ * This is only necessary for the primary GIC.
+ */
+ for (i = 0; i < NR_GIC_CPU_IF; i++)
+ gic_cpu_map[i] = 0xff;
+#ifdef CONFIG_SMP
+ set_smp_cross_call(gic_raise_softirq);
+ register_cpu_notifier(&gic_cpu_notifier);
+#endif
+ set_handle_irq(gic_handle_irq);
+ if (static_key_true(&supports_deactivate))
+ pr_info("GIC: Using split EOI/Deactivate mode\n");
+ }
+
+ return gic_init_bases(gic, irq_start, handle);
+}
+
void __init gic_init(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
--
2.1.4