Re: [PATCH v2 4/5] ARM: dts: rockchip: Add shared file for audio related nodes for veyron boards

[Heiko Stuebner]

Am Montag, 9. Mai 2016, 12:46:34 schrieb Enric Balletbo i Serra:
> Set i2s block to "okay", add sound node for max98090 with gpios for
> HP and Mic detect and pinctrl, and add a max98090 device and ts3a227e to
> the correct i2c bus.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>

I only got a "applied" reply from Marks scripts for patch 3/5, so only today
saw that all 3 actually got applied.

Anyway, I've applied this to my dts32-branch for 4.8 now [0] with some
modifications regarding
- the commit subject+message
- ordering
- io_domains access (via the phandle now)
- regulator suspend property
so maybe take a look and holler if you see a mistake.

I was able to get audio over the headphones (so definitly an improvement),
but so far not over the built-in speakers. Did you need to do something
special in the configuration for this?


Heiko

[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=volatile-v4.8-armsoc/dts32&id=1452aee5a7acc03518ef5215dd3dbac4444efe52

> ---
> Changes since v1:
>  - None
> 
>  arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi | 102
> ++++++++++++++++++++++ 1 file changed, 102 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
> 
> diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
> b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi new file mode 100644
> index 0000000..f045e1a
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
> @@ -0,0 +1,102 @@
> +/*
> + * Google Veyron (and derivatives) fragment for the  max98090 audio
> + * codec and analog headphone jack.
> + *
> + * Copyright 2016 Google, Inc
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/ {
> +
> +	sound {
> +		compatible = "rockchip,rockchip-audio-max98090";
> +		rockchip,model = "ROCKCHIP-I2S";
> +		rockchip,i2s-controller = <&i2s>;
> +		rockchip,audio-codec = <&max98090>;
> +		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
> +		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
> +		rockchip,headset-codec = <&headsetcodec>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&mic_det>, <&hp_det>;
> +	};
> +
> +	io-domains {
> +		audio-supply = <&vcc18_codec>;
> +	};
> +};
> +
> +&rk808 {
> +	vcc10-supply = <&vcc33_sys>;
> +
> +	regulators {
> +		vcc18_codec: LDO_REG6 {
> +			regulator-always-on;
> +			regulator-boot-on;
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-name = "vcc18_codec";
> +			regulator-suspend-mem-disabled;
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	max98090: max98090@10 {
> +		compatible = "maxim,max98090";
> +		reg = <0x10>;
> +		clock-names = "mclk";
> +		clocks = <&cru SCLK_I2S0_OUT>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&int_codec>;
> +	};
> +};
> +
> +&i2c4 {
> +	headsetcodec: ts3a227e@3b {
> +		compatible = "ti,ts3a227e";
> +		reg = <0x3b>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts3a227e_int_l>;
> +		ti,micbias = <7>;		/* MICBIAS = 2.8V */
> +	};
> +};
> +
> +&i2s {
> +	status = "okay";
> +	clock-names = "i2s_hclk", "i2s_clk";
> +	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> +};
> +
> +&pinctrl {
> +	codec {
> +		hp_det: hp-det {
> +			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		/*
> +		 * HACK: We're going to _pull down_ this _active low_ interrupt
> +		 * so that it never fires.  We don't need this interrupt because
> +		 * we've got a ts3a227e chip but the driver requires it.
> +		 */
> +		int_codec: int-codec {
> +			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +
> +		mic_det: mic-det {
> +			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	headset {
> +		ts3a227e_int_l: ts3a227e-int-l {
> +			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +};