Re: [PATCH 1/2] arm64: dts: NS2: Add all of the UARTs

[Kefeng Wang]

On 2016/5/14 0:49, Jon Mason wrote:
> 
> 
> On Thu, May 12, 2016 at 10:09 PM, Kefeng Wang <wangkefeng.wang@xxxxxxxxxx <mailto:wangkefeng.wang@xxxxxxxxxx>> wrote:
> 
> 
> 
>     On 2016/5/12 22:46, Jon Mason wrote:
>     >
>     >
>     > On Thu, May 12, 2016 at 2:16 AM, Kefeng Wang <wangkefeng.wang@xxxxxxxxxx <mailto:wangkefeng.wang@xxxxxxxxxx> <mailto:wangkefeng.wang@xxxxxxxxxx <mailto:wangkefeng.wang@xxxxxxxxxx>>> wrote:
>     >
>     >
>     >
>     >     On 2016/5/12 6:56, Jon Mason wrote:
>     >     > Add all of the UARTs present on NS2 and enable them in the SVK device
>     >     > tree file.  Also, do some magic to make sure that uart3 is discovered as
>     >     > ttyS0 (as that is the console UART).
>     >     >
>     >     > Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx <mailto:jonmason@xxxxxxxxxxxx> <mailto:jonmason@xxxxxxxxxxxx <mailto:jonmason@xxxxxxxxxxxx>>>
>     >     > ---
>     >     >  arch/arm64/boot/dts/broadcom/ns2-svk.dts | 16 ++++++++++++++++
>     >     >  arch/arm64/boot/dts/broadcom/ns2.dtsi    | 30 ++++++++++++++++++++++++++++++
>     >     >  2 files changed, 46 insertions(+)
>     >     >
>     >     > diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>     >     > index 7cd3640..b062a44 100644
>     >     > --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>     >     > +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
>     >     > @@ -40,10 +40,14 @@
>     >     >
>     >     >       aliases {
>     >     >               serial0 = &uart3;
>     >     > +             serial1 = &uart0;
>     >     > +             serial2 = &uart1;
>     >     > +             serial3 = &uart2;
>     >     >       };
>     >     >
>     >     >       chosen {
>     >     >               stdout-path = "serial0:115200n8";
>     >     > +             bootargs = "earlycon=uart8250,mmio32,0x66130000";
>     >
>     >     Hi Jon,
>     >
>     >     I submit a patch[1], with it, we can use earlycon without option to enable early console
>     >     for "snps,dw-apb-uart", could you help me to test it, thanks.
>     >
>     >
>     > Adding your change and removing the line above does not cause earlycon to work for me.  Is there any additional changes necessary for this to work?
>     With my patch, the bootargs still need contain earlycon, but no need uart8250,mmio32,0x66130000;
> 
>     chosen {
>             stdout-path = "serial0:115200n8";
>             bootargs = "earlycon";
>     }
> 
>     Hope it would work.
> 
> 
> I can confirm that with your change and the change to the bootargs you describe above, it works as desired.  Was your change already accepted?
> 

Great, thanks a lot. it is still being reviewing for now and waiting for response for now.

BRs,
Kefeng

> Thanks,
> Jon
>  
> 
> 
>     BRs,
>     Kefeng
> 
>     >
>     > Thanks,
>     > Jon
>     >
>     >
>     >
>     >     BRs,
>     >     Kefeng
>     >
>     >
>     >     [1] https://lkml.org/lkml/2016/5/11/34
>     >
>     >     >       };
>     >     >
>     >     >       memory {
>     >     > @@ -68,6 +72,18 @@
>     >     >       status = "ok";
>     >     >  };
>     >     >
>     >     > +&uart0 {
>     >     > +     status = "ok";
>     >     > +};
>     >     > +
>     >     > +&uart1 {
>     >     > +     status = "ok";
>     >     > +};
>     >     > +
>     >     > +&uart2 {
>     >     > +     status = "ok";
>     >     > +};
>     >     > +
>     >     >  &uart3 {
>     >     >       status = "ok";
>     >     >  };
>     >     > diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
>     >     > index 788ed8f..c77a9e8 100644
>     >     > --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
>     >     > +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
>     >     > @@ -357,6 +357,36 @@
>     >     >                       status = "disabled";
>     >     >               };
>     >     >
>     >     > +             uart0: serial@66100000 {
>     >     > +                     compatible = "snps,dw-apb-uart";
>     >     > +                     reg = <0x66100000 0x100>;
>     >     > +                     interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
>     >     > +                     clocks = <&iprocslow>;
>     >     > +                     reg-shift = <2>;
>     >     > +                     reg-io-width = <4>;
>     >     > +                     status = "disabled";
>     >     > +             };
>     >     > +
>     >     > +             uart1: serial@66110000 {
>     >     > +                     compatible = "snps,dw-apb-uart";
>     >     > +                     reg = <0x66110000 0x100>;
>     >     > +                     interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
>     >     > +                     clocks = <&iprocslow>;
>     >     > +                     reg-shift = <2>;
>     >     > +                     reg-io-width = <4>;
>     >     > +                     status = "disabled";
>     >     > +             };
>     >     > +
>     >     > +             uart2: serial@66120000 {
>     >     > +                     compatible = "snps,dw-apb-uart";
>     >     > +                     reg = <0x66120000 0x100>;
>     >     > +                     interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
>     >     > +                     clocks = <&iprocslow>;
>     >     > +                     reg-shift = <2>;
>     >     > +                     reg-io-width = <4>;
>     >     > +                     status = "disabled";
>     >     > +             };
>     >     > +
>     >     >               uart3: serial@66130000 {
>     >     >                       compatible = "snps,dw-apb-uart";
>     >     >                       reg = <0x66130000 0x100>;
>     >     >
>     >
>     >
> 
>