Re: [PATCH] asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions

[Dean Jenkins]

Hi John,

Thanks for your patch. I think the patch has already been applied.

The git commit subject of
"asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions"

I think is a bit misleading as the bug relates to reception and not 
transmission.

I guess that your intent was to say that "the through-put of 
communications was low" due to the bug.

Personally, I would of used a git subject like
"asix: Fix asix_rx_fixup_interval() offset calculation for spanned frames"

But anyway, I have no real issue with the patch.

On 17/05/16 04:36, John Stultz wrote:
> In testing with HiKey, we found that since
> commit 3f30b158eba5 ("asix: On RX avoid creating bad Ethernet
> frames"),
> we're seeing lots of noise during network transfers:
>
> [  239.027993] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
> [  239.037310] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x54ebb5ec, offset 4
> [  239.045519] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xcdffe7a2, offset 4
> [  239.275044] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
> [  239.284355] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1d36f59d, offset 4
> [  239.292541] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xaef3c1e9, offset 4
> [  239.518996] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
> [  239.528300] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x2881912, offset 4
> [  239.536413] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x5638f7e2, offset 4
>
> And network throughput ends up being pretty bursty and slow with
> a overall throughput of at best ~30kB/s (where as previously we
> got 1.1MB/s with the slower USB1.1 "full speed" host).
>
> We found the issue also was reproducible on a x86_64 system,
> using a "high-speed" USB2.0 port but the throughput did not
> measurably drop (possibly due to the scp transfer being cpu
> bound on my slow test hardware).
>
> After lots of debugging, I found the check added in the
> problematic commit seems to be calculating the offset
> incorrectly.
>
> In the normal case, in the main loop of the function, we do:
> (where offset is zero, or set to "offset += (copy_length + 1) &
> 0xfffe" in the previous loop)
>      rx->header = get_unaligned_le32(skb->data +
>                                      offset);
>      offset += sizeof(u32);
>
> But the problematic patch calculates:
>      offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
>      rx->header = get_unaligned_le32(skb->data + offset);
>
> Adding some debug logic to check those offset calculation used
> to find rx->header, the one in problematic code is always too
> large by sizeof(u32).
>
> Thus, this patch removes the incorrect " + sizeof(u32)" addition
> in the problematic calculation, and resolves the issue.
>
> Cc: Dean Jenkins <Dean_Jenkins@xxxxxxxxxx>
> Cc: "David B. Robins" <linux@xxxxxxxxxxxxxxx>
> Cc: Mark Craske <Mark_Craske@xxxxxxxxxx>
> Cc: Emil Goode <emilgoode@xxxxxxxxx>
> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
> Cc: YongQin Liu <yongqin.liu@xxxxxxxxxx>
> Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
> Cc: Ivan Vecera <ivecera@xxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Cc: netdev@xxxxxxxxxxxxxxx
> Cc: stable <stable@xxxxxxxxxxxxxxx> #4.4+
> Reported-by: Yongqin Liu <yongqin.liu@xxxxxxxxxx>
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> ---
>   drivers/net/usb/asix_common.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
> index 0c5c22b..7de5ab5 100644
> --- a/drivers/net/usb/asix_common.c
> +++ b/drivers/net/usb/asix_common.c
> @@ -66,7 +66,7 @@ int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
>   	 * buffer.
>   	 */
>   	if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
> -		offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
> +		offset = ((rx->remaining + 1) & 0xfffe);
I have verified that this fixes my ARM board. Thanks for finding the 
mistake.
Note that the outer set of brackets could of been removed as they are 
redundant.

>   		rx->header = get_unaligned_le32(skb->data + offset);
>   		offset = 0;
>   
Thanks,

Best regards,
Dean

--
Dean Jenkins
Embedded Software Engineer
Linux Transportation Solutions
Mentor Embedded Software Division
Mentor Graphics (UK) Ltd.