Re: [PATCH v2 2/9] powerpc/kvm: make hypervisor state restore a function

[Gautham R Shenoy]

Hi Shreyas,

On Tue, May 03, 2016 at 01:54:31PM +0530, Shreyas B. Prabhu wrote:
> In the current code, when the thread wakes up in reset vector, some
> of the state restore code and check for whether a thread needs to
> branch to kvm is duplicated. Reorder the code such that this
> duplication is avoided.
> 
> At a higher level this is what the change looks like-

I have manually verified that the code flow in the new patch is has
the same effect as whatever we were doing earlier. There a couple of
comments inline.

> diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
> index 7716ceb..7ebfbb0 100644
> --- a/arch/powerpc/kernel/exceptions-64s.S
> +++ b/arch/powerpc/kernel/exceptions-64s.S
> @@ -107,25 +107,8 @@ BEGIN_FTR_SECTION
>  	beq	9f
> 
>  	cmpwi	cr3,r13,2
> +	bl	power7_restore_hyp_resource
> 
> -	/*
> -	 * Check if last bit of HSPGR0 is set. This indicates whether we are
> -	 * waking up from winkle.
> -	 */
> -	GET_PACA(r13)
> -	clrldi	r5,r13,63
> -	clrrdi	r13,r13,1
> -	cmpwi	cr4,r5,1
> -	mtspr	SPRN_HSPRG0,r13
> -
> -	lbz	r0,PACA_THREAD_IDLE_STATE(r13)
> -	cmpwi   cr2,r0,PNV_THREAD_NAP
> -	bgt     cr2,8f				/* Either sleep or Winkle */
> -
> -	/* Waking up from nap should not cause hypervisor state loss */
> -	bgt	cr3,.
> -
> -	/* Waking up from nap */
>  	li	r0,PNV_THREAD_RUNNING
>  	stb	r0,PACA_THREAD_IDLE_STATE(r13)	/* Clear thread state */
> 
> @@ -143,13 +126,9 @@ BEGIN_FTR_SECTION
> 
>  	/* Return SRR1 from power7_nap() */
>  	mfspr	r3,SPRN_SRR1
> -	beq	cr3,2f
> -	b	power7_wakeup_noloss
> -2:	b	power7_wakeup_loss
> -
> -	/* Fast Sleep wakeup on PowerNV */
> -8:	GET_PACA(r13)

In the old code, we do a GET_PACA(r13) before invoking the
power7_wakeup_tb_loss. In the new code we don't. Can you explain
this omission ?


[..snip..]

> @@ -420,33 +451,9 @@ common_exit:
> 
>  hypervisor_state_restored:
> 
> -	li	r5,PNV_THREAD_RUNNING
> -	stb     r5,PACA_THREAD_IDLE_STATE(r13)
> -
>  	mtspr	SPRN_SRR1,r16
> -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
> -	li      r0,KVM_HWTHREAD_IN_KERNEL
> -	stb     r0,HSTATE_HWTHREAD_STATE(r13)
> -	/* Order setting hwthread_state vs. testing hwthread_req */
> -	sync
> -	lbz     r0,HSTATE_HWTHREAD_REQ(r13)
> -	cmpwi   r0,0
> -	beq     6f
> -	b       kvm_start_guest
> -6:
> -#endif
> -
> -	REST_NVGPRS(r1)
> -	REST_GPR(2, r1)
> -	ld	r3,_CCR(r1)
> -	ld	r4,_MSR(r1)
> -	ld	r5,_NIP(r1)
> -	addi	r1,r1,INT_FRAME_SIZE
> -	mtcr	r3
> -	mfspr	r3,SPRN_SRR1		/* Return SRR1 */
> -	mtspr	SPRN_SRR1,r4
> -	mtspr	SPRN_SRR0,r5
> -	rfid
> +	mtlr	r17
> +	blr


Perhaps you could add a comment against this blr to indicate that we
go back to the reset vector right after the call to
power7_restore_hyp_resource. 

> 
>  fastsleep_workaround_at_exit:
>  	li	r3,1
> -- 
> 2.4.11
>