Hi everyone,
This series enables more peripherals for Allwinner A13-based Q8 devices.
The peripherals include the WiFi, the PMIC's micro-usb power supply
(driver), audio codec (headphone and speaker), and full display support
with the new DRM KMS driver. The series is based on parts of Maxime's
"drm: Add Support for Passive RGB to VGA bridges" series, specifically
the clk and drm fixes, and common DTS bits.
Hans, since you have a collection of q8 tablets, I'm hoping you could
test these bits and provide some feedback.
Patch 1 is a small fix for part of the init failure path.
Patch 2 disables ldo5 on the axp209 by default. This regulator output is
muxed with a gpio, and the regulator on/off settings override the gpio.
Patch 3 enables the USB WiFi module found.
Patch 4 enables the USB/VBUS power supply of the PMIC.
Patch 5 enables the audio codec, with support for the speaker amp.
Patch 6 enables the LCD panel with the display pipeline.
Regards
ChenYu
Chen-Yu Tsai (6):
drm: sun4i: do cleanup if RGB output init fails
ARM: dts: axp209: Disable ldo5 by default
ARM: dts: sun5i: q8-common: Enable USB-based WiFi
ARM: dts: sun5i: q8-common: Enable USB power supply
ARM: dts: sun5i: q8-common: Enable audio codec
ARM: dts: sun5i: q8-common: Enable display pipeline and LCD display
arch/arm/boot/dts/axp209.dtsi | 1 +
arch/arm/boot/dts/sun5i-q8-common.dtsi | 62 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 +++-
3 files changed, 68 insertions(+), 1 deletion(-)