Re: [PATCH] kvm-pr: manage illegal instructions

[Thomas Huth]

On 17.05.2016 19:49, Laurent Vivier wrote:
> 
> 
> On 17/05/2016 10:37, Alexander Graf wrote:
>> On 05/17/2016 10:35 AM, Laurent Vivier wrote:
>>>
>>> On 12/05/2016 16:23, Laurent Vivier wrote:
>>>>
>>>> On 12/05/2016 11:27, Alexander Graf wrote:
>>>>> On 05/12/2016 11:10 AM, Laurent Vivier wrote:
>>>>>> On 11/05/2016 13:49, Alexander Graf wrote:
>>>>>>> On 05/11/2016 01:14 PM, Laurent Vivier wrote:
>>>>>>>> On 11/05/2016 12:35, Alexander Graf wrote:
>>>>>>>>> On 03/15/2016 09:18 PM, Laurent Vivier wrote:
>>>>>>>>>> While writing some instruction tests for kvm-unit-tests for
>>>>>>>>>> powerpc,
>>>>>>>>>> I've found that illegal instructions are not managed correctly
>>>>>>>>>> with
>>>>>>>>>> kvm-pr,
>>>>>>>>>> while it is fine with kvm-hv.
>>>>>>>>>>
>>>>>>>>>> When an illegal instruction (like ".long 0") is processed by
>>>>>>>>>> kvm-pr,
>>>>>>>>>> the kernel logs are filled with:
>>>>>>>>>>
>>>>>>>>>>          Couldn't emulate instruction 0x00000000 (op 0 xop 0)
>>>>>>>>>>          kvmppc_handle_exit_pr: emulation at 700 failed (00000000)
>>>>>>>>>>
>>>>>>>>>> While the exception handler receives an interrupt for each
>>>>>>>>>> instruction
>>>>>>>>>> executed after the illegal instruction.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Laurent Vivier <lvivier@xxxxxxxxxx>
>>>>>>>>>> ---
>>>>>>>>>>      arch/powerpc/kvm/book3s_emulate.c | 4 +++-
>>>>>>>>>>      1 file changed, 3 insertions(+), 1 deletion(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/arch/powerpc/kvm/book3s_emulate.c
>>>>>>>>>> b/arch/powerpc/kvm/book3s_emulate.c
>>>>>>>>>> index 2afdb9c..4ee969d 100644
>>>>>>>>>> --- a/arch/powerpc/kvm/book3s_emulate.c
>>>>>>>>>> +++ b/arch/powerpc/kvm/book3s_emulate.c
>>>>>>>>>> @@ -99,7 +99,6 @@ int kvmppc_core_emulate_op_pr(struct kvm_run
>>>>>>>>>> *run,
>>>>>>>>>> struct kvm_vcpu *vcpu,
>>>>>>>>>>            switch (get_op(inst)) {
>>>>>>>>>>          case 0:
>>>>>>>>>> -        emulated = EMULATE_FAIL;
>>>>>>>>>>              if ((kvmppc_get_msr(vcpu) & MSR_LE) &&
>>>>>>>>>>                  (inst == swab32(inst_sc))) {
>>>>>>>>>>                  /*
>>>>>>>>>> @@ -112,6 +111,9 @@ int kvmppc_core_emulate_op_pr(struct kvm_run
>>>>>>>>>> *run,
>>>>>>>>>> struct kvm_vcpu *vcpu,
>>>>>>>>>>                  kvmppc_set_gpr(vcpu, 3, EV_UNIMPLEMENTED);
>>>>>>>>>>                  kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4);
>>>>>>>>>>                  emulated = EMULATE_DONE;
>>>>>>>>>> +        } else {
>>>>>>>>>> +            kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
>>>>>>>>> But isn't that exactly what the semantic of EMULATE_FAIL is?
>>>>>>>>> Fixing it
>>>>>>>>> up in book3s_emulate.c is definitely the wrong spot.
>>>>>>>>>
>>>>>>>>> So what is the problem you're trying to solve? Is the SRR0 at the
>>>>>>>>> wrong
>>>>>>>>> spot or are the log messages the problem?
>>>>>>>> No, the problem is the host kernel logs are filled by the message
>>>>>>>> and
>>>>>>>> the execution hangs. And the host becomes unresponsiveness, even
>>>>>>>> after
>>>>>>>> the end of the tests.
>>>>>>>>
>>>>>>>> Please, try to run kvm-unit-tests (the emulator test) on a KVM-PR
>>>>>>>> host,
>>>>>>>> and check the kernel logs (dmesg), then try to ssh to the host...
>>>>>>> Ok, so the log messages are the problem. Please fix the message
>>>>>>> output
>>>>>>> then - or remove it altogether. Or if you like, create a module
>>>>>>> parameter that allows you to emit them.
>>>>>>>
>>>>>>> I personally think the best solution would be to just convert the
>>>>>>> message into a trace point.
>>>>>>>
>>>>>>> While at it, please see whether the guest can trigger similar host
>>>>>>> log
>>>>>>> output excess in other code paths.
>>>>>> The problem is not really with the log messages: they are
>>>>>> consequence of
>>>>>> the bug I try to fix.
>>>>>>
>>>>>> What happens is once kvm_pr decodes an invalid instruction all the
>>>>>> valid
>>>>>> following instructions trigger a Program exception to the guest
>>>>>> (but are
>>>>>> executed correctly). It has no real consequence on big machine like
>>>>>> POWER8, except that the guest become very slow and the log files of
>>>>>> the
>>>>>> host are filled with messages (and qemu uses 100% of the CPU). On a
>>>>>> smaller machine like a  PowerMac G5, the machine becomes simply
>>>>>> unusable.
>>>>> It's probably more related to your verbosity level of kernel messages.
>>>>> If you pass loglevel=0 (or quiet) to you kernel cmdline you won't get
>>>>> the messages printed to serial which is what's slowing you down.
>>>>>
>>>>> The other problem sounds pretty severe, but the only thing your patch
>>>>> does any different from the current code flow would be the patch below.
>>>>> Or did I miss anything?
>>>>>
>>>>> diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
>>>>> index 5cc2e7a..4672bc2 100644
>>>>> --- a/arch/powerpc/kvm/emulate.c
>>>>> +++ b/arch/powerpc/kvm/emulate.c
>>>>> @@ -302,7 +302,11 @@ int kvmppc_emulate_instruction(struct kvm_run
>>>>> *run,
>>>>> struct kvm_vcpu *vcpu)
>>>>>                          advance = 0;
>>>>>                          printk(KERN_ERR "Couldn't emulate instruction
>>>>> 0x%08x "
>>>>>                                 "(op %d xop %d)\n", inst, get_op(inst),
>>>>> get_xop(inst));
>>>>> +#ifdef CONFIG_PPC_BOOK3S
>>>>> +                       kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
>>>>> +#else
>>>>>                          kvmppc_core_queue_program(vcpu, 0);
>>>>> +#endif
>>>>>                  }
>>>>>          }
>>>>>
>>> Do you want I send an updated patch with your changes?
>>
>> Well, you reported the issue and narrowed it down, so feel free to send
>> it under your name :). I merely simplified your patch a bit.
> 
> Well, while I was trying to update the patch, I've re-tested this... and
> it fails. I don't know what I'm doing bad now or what I did bad before
> but it seems it doesn't work. :(
> 
> Thomas, could try the patch from Alex?

The patch from Alex also does not work for me.

What's that difference with SRR1_PROGILL anyway, how should that prevent
the endless messages?

 Thomas