Re: [PATCH v2 10/12] spi: add driver for J-Core SPI controller

[Geert Uytterhoeven]

On Fri, May 20, 2016 at 4:53 AM, Rich Felker <dalias@xxxxxxxx> wrote:
> --- /dev/null
> +++ b/drivers/spi/spi-jcore.c

> +static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi, struct spi_transfer *t)
> +{
> +       struct jcore_spi *hw = spi_master_get_devdata(master);
> +
> +       void *ctrl_reg = hw->base + CTRL_REG;
> +       void *data_reg = hw->base + DATA_REG;
> +       int timeout;

unsigned int

> +       int xmit;

u32

> +       int status;

u32

> +
> +       /* data buffers */
> +       const unsigned char *tx;
> +       unsigned char *rx;
> +       int len;

unsigned int

> +       int count;

unsigned int

> +
> +       jcore_spi_baudrate(hw, t->speed_hz);
> +
> +       xmit = hw->csReg | hw->speedReg | JCORE_SPI_CTRL_XMIT;
> +       tx = t->tx_buf;
> +       rx = t->rx_buf;
> +       len = t->len;
> +
> +       for (count = 0; count < len; count++) {
> +               timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
> +               do status = readl(ctrl_reg);
> +               while ((status & JCORE_SPI_STAT_BUSY) && --timeout);

do {
        ...
} while (...)

> +               if (!timeout) break;

if (...)
        ...

> +
> +               writel(tx ? *tx++ : 0, data_reg);

You can remove the check for tx if you set the SPI_MASTER_MUST_TX
flag in spi_master.flags.

> +               writel(xmit, ctrl_reg);
> +
> +               timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP;
> +               do status = readl(ctrl_reg);
> +               while ((status & JCORE_SPI_STAT_BUSY) && --timeout);

do {
        ...
} while (...)

> +               if (!timeout) break;


if (...)
        ...

> +
> +               if (rx) *rx++ = readl(data_reg);


if (...)
        ...

> +       }

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds