Re: [PATCH 3/3] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms

[Carlo Caione]

On 20/05/16 10:53, Neil Armstrong wrote:
> On 05/20/2016 10:47 AM, Carlo Caione wrote:
> > On 20/05/16 10:27, Neil Armstrong wrote:
> >> Update DTSI file to add the reset controller node.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> >> ---
> >>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++
> >>  1 file changed, 6 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> index 832815d..2463e04 100644
> >> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> >> @@ -129,6 +129,12 @@
> >>  			#size-cells = <2>;
> >>  			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
> >>  
> >> +			reset: reset-controller@4404 {
> >> +				compatible = "amlogic,meson-gxbb-reset";
> >> +				reg = <0x0 0x04404 0x0 0x20>;
> >> +				#reset-cells = <1>;
> >> +			};
> >> +
> >>  			uart_A: serial@84c0 {
> >>  				compatible = "amlogic,meson-uart";
> >>  				reg = <0x0 0x084c0 0x0 0x14>;
> > 
> > Missing #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> ?
> > 
> > Thanks,
> > 
> 
> Shouldn't we wait until the reset bindings are actually used in the dtsi ?
> I'm quite sure kevin will post it with the Ethernet nodes.

Why? The header file is related to the reset controller. Better add it
now with this patchset.

Cheers,

-- 
Carlo Caione