[PATCH 11/20] staging: comedi: drivers: re-do PLX PCI 9080 INTCSR register values
From: Ian Abbott
Date: Fri May 20 2016 - 09:52:38 EST
Replace the existing macros in "plx9080.h" that define values for the
INTCSR register. Use the prefix `PLX_INTCSR_` for the macros. Make use
of the `BIT(x)` and `GENMASK(h,l)` macros to define the values.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 14 +++--
drivers/staging/comedi/drivers/gsc_hpdi.c | 14 +++--
drivers/staging/comedi/drivers/plx9080.h | 91 ++++++++++++++++++++--------
drivers/staging/comedi/drivers/rtd520.c | 3 +-
4 files changed, 83 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 4a8e88a..6b3f4dc 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1336,8 +1336,9 @@ static void init_plx9080(struct comedi_device *dev)
/* enable interrupts on plx 9080 */
devpriv->plx_intcsr_bits |=
- ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
- ICS_DMA0_E | ICS_DMA1_E;
+ PLX_INTCSR_LSEABORTEN | PLX_INTCSR_LSEPARITYEN | PLX_INTCSR_PIEN |
+ PLX_INTCSR_PLIEN | PLX_INTCSR_PABORTIEN | PLX_INTCSR_LIOEN |
+ PLX_INTCSR_DMA0IEN | PLX_INTCSR_DMA1IEN;
writel(devpriv->plx_intcsr_bits,
devpriv->plx9080_iobase + PLX_REG_INTCSR);
}
@@ -2836,7 +2837,7 @@ static void handle_ai_interrupt(struct comedi_device *dev,
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
dma1_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR1);
- if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */
+ if (plx_status & PLX_INTCSR_DMA1IA) { /* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
devpriv->plx9080_iobase + PLX_REG_DMACSR1);
@@ -3014,7 +3015,7 @@ static void handle_ao_interrupt(struct comedi_device *dev,
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
dma0_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR0);
- if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
+ if (plx_status & PLX_INTCSR_DMA0IA) { /* dma chan 0 interrupt */
if ((dma0_status & PLX_DMA_EN_BIT) &&
!(dma0_status & PLX_DMA_DONE_BIT)) {
writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT,
@@ -3067,8 +3068,9 @@ static irqreturn_t handle_interrupt(int irq, void *d)
handle_ai_interrupt(dev, status, plx_status);
handle_ao_interrupt(dev, status, plx_status);
- /* clear possible plx9080 interrupt sources */
- if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
+ /* clear possible plx9080 interrupt sources */
+ if (plx_status & PLX_INTCSR_LDBIA) {
+ /* clear local doorbell interrupt */
plx_bits = readl(devpriv->plx9080_iobase + PLX_REG_L2PDBELL);
writel(plx_bits, devpriv->plx9080_iobase + PLX_REG_L2PDBELL);
}
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 536bebe..e288798 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -199,7 +199,8 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d)
return IRQ_NONE;
plx_status = readl(devpriv->plx9080_mmio + PLX_REG_INTCSR);
- if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0)
+ if ((plx_status &
+ (PLX_INTCSR_DMA0IA | PLX_INTCSR_DMA1IA | PLX_INTCSR_PLIA)) == 0)
return IRQ_NONE;
hpdi_intr_status = readl(dev->mmio + INTERRUPT_STATUS_REG);
@@ -211,7 +212,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d)
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
dma0_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR0);
- if (plx_status & ICS_DMA0_A) {
+ if (plx_status & PLX_INTCSR_DMA0IA) {
/* dma chan 0 interrupt */
writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
devpriv->plx9080_mmio + PLX_REG_DMACSR0);
@@ -224,7 +225,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d)
/* spin lock makes sure no one else changes plx dma control reg */
spin_lock_irqsave(&dev->spinlock, flags);
dma1_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR1);
- if (plx_status & ICS_DMA1_A) {
+ if (plx_status & PLX_INTCSR_DMA1IA) {
/* XXX */ /* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
devpriv->plx9080_mmio + PLX_REG_DMACSR1);
@@ -232,7 +233,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d)
spin_unlock_irqrestore(&dev->spinlock, flags);
/* clear possible plx9080 interrupt sources */
- if (plx_status & ICS_LDIA) {
+ if (plx_status & PLX_INTCSR_LDBIA) {
/* clear local doorbell interrupt */
plx_bits = readl(devpriv->plx9080_mmio + PLX_REG_L2PDBELL);
writel(plx_bits, devpriv->plx9080_mmio + PLX_REG_L2PDBELL);
@@ -533,8 +534,9 @@ static int gsc_hpdi_init(struct comedi_device *dev)
/* enable interrupts */
plx_intcsr_bits =
- ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
- ICS_DMA0_E;
+ PLX_INTCSR_LSEABORTEN | PLX_INTCSR_LSEPARITYEN | PLX_INTCSR_PIEN |
+ PLX_INTCSR_PLIEN | PLX_INTCSR_PABORTIEN | PLX_INTCSR_LIOEN |
+ PLX_INTCSR_DMA0IEN;
writel(plx_intcsr_bits, devpriv->plx9080_mmio + PLX_REG_INTCSR);
return 0;
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index e544327..e9f1b9c 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -321,32 +321,71 @@ struct plx_dma_desc {
/* Interrupt Control/Status Register */
#define PLX_REG_INTCSR 0x0068
-#define ICS_AERR 0x00000001 /* Assert LSERR on ABORT */
-#define ICS_PERR 0x00000002 /* Assert LSERR on Parity Error */
-#define ICS_SERR 0x00000004 /* Generate PCI SERR# */
-#define ICS_MBIE 0x00000008 /* mailbox interrupt enable */
-#define ICS_PIE 0x00000100 /* PCI Interrupt Enable */
-#define ICS_PDIE 0x00000200 /* PCI Doorbell Interrupt Enable */
-#define ICS_PAIE 0x00000400 /* PCI Abort Interrupt Enable */
-#define ICS_PLIE 0x00000800 /* PCI Local Int Enable */
-#define ICS_RAE 0x00001000 /* Retry Abort Enable */
-#define ICS_PDIA 0x00002000 /* PCI Doorbell Interrupt Active */
-#define ICS_PAIA 0x00004000 /* PCI Abort Interrupt Active */
-#define ICS_LIA 0x00008000 /* Local Interrupt Active */
-#define ICS_LIE 0x00010000 /* Local Interrupt Enable */
-#define ICS_LDIE 0x00020000 /* Local Doorbell Int Enable */
-#define ICS_DMA0_E 0x00040000 /* DMA #0 Interrupt Enable */
-#define ICS_DMA1_E 0x00080000 /* DMA #1 Interrupt Enable */
-#define ICS_LDIA 0x00100000 /* Local Doorbell Int Active */
-#define ICS_DMA0_A 0x00200000 /* DMA #0 Interrupt Active */
-#define ICS_DMA1_A 0x00400000 /* DMA #1 Interrupt Active */
-#define ICS_BIA 0x00800000 /* BIST Interrupt Active */
-#define ICS_TA_DM 0x01000000 /* Target Abort - Direct Master */
-#define ICS_TA_DMA0 0x02000000 /* Target Abort - DMA #0 */
-#define ICS_TA_DMA1 0x04000000 /* Target Abort - DMA #1 */
-#define ICS_TA_RA 0x08000000 /* Target Abort - Retry Timeout */
-/* mailbox x is active */
-#define ICS_MBIA(x) (0x10000000 << ((x) & 0x3))
+/* Enable Local Bus LSERR# when PCI Bus Target Abort or Master Abort occurs */
+#define PLX_INTCSR_LSEABORTEN BIT(0)
+/* Enable Local Bus LSERR# when PCI parity error occurs */
+#define PLX_INTCSR_LSEPARITYEN BIT(1)
+/* Generate PCI Bus SERR# when set to 1 */
+#define PLX_INTCSR_GENSERR BIT(2)
+/* Mailbox Interrupt Enable (local bus interrupts on PCI write to MBOX0-3) */
+#define PLX_INTCSR_MBIEN BIT(3)
+/* PCI Interrupt Enable */
+#define PLX_INTCSR_PIEN BIT(8)
+/* PCI Doorbell Interrupt Enable */
+#define PLX_INTCSR_PDBIEN BIT(9)
+/* PCI Abort Interrupt Enable */
+#define PLX_INTCSR_PABORTIEN BIT(10)
+/* PCI Local Interrupt Enable */
+#define PLX_INTCSR_PLIEN BIT(11)
+/* Retry Abort Enable (for diagnostic purposes only) */
+#define PLX_INTCSR_RAEN BIT(12)
+/* PCI Doorbell Interrupt Active (read-only) */
+#define PLX_INTCSR_PDBIA BIT(13)
+/* PCI Abort Interrupt Active (read-only) */
+#define PLX_INTCSR_PABORTIA BIT(14)
+/* Local Interrupt (LINTi#) Active (read-only) */
+#define PLX_INTCSR_PLIA BIT(15)
+/* Local Interrupt Output (LINTo#) Enable */
+#define PLX_INTCSR_LIOEN BIT(16)
+/* Local Doorbell Interrupt Enable */
+#define PLX_INTCSR_LDBIEN BIT(17)
+/* DMA Channel 0 Interrupt Enable */
+#define PLX_INTCSR_DMA0IEN BIT(18)
+/* DMA Channel 1 Interrupt Enable */
+#define PLX_INTCSR_DMA1IEN BIT(19)
+/* DMA Channel N Interrupt Enable (N <= 1) */
+#define PLX_INTCSR_DMAIEN(n) ((n) ? PLX_INTCSR_DMA1IEN : PLX_INTCSR_DMA0IEN)
+/* Local Doorbell Interrupt Active (read-only) */
+#define PLX_INTCSR_LDBIA BIT(20)
+/* DMA Channel 0 Interrupt Active (read-only) */
+#define PLX_INTCSR_DMA0IA BIT(21)
+/* DMA Channel 1 Interrupt Active (read-only) */
+#define PLX_INTCSR_DMA1IA BIT(22)
+/* DMA Channel N Interrupt Active (N <= 1) (read-only) */
+#define PLX_INTCSR_DMAIA(n) ((n) ? PLX_INTCSR_DMA1IA : PLX_INTCSR_DMA0IA)
+/* BIST Interrupt Active (read-only) */
+#define PLX_INTCSR_BISTIA BIT(23)
+/* Direct Master Not Bus Master During Master Or Target Abort (read-only) */
+#define PLX_INTCSR_ABNOTDM BIT(24)
+/* DMA Channel 0 Not Bus Master During Master Or Target Abort (read-only) */
+#define PLX_INTCSR_ABNOTDMA0 BIT(25)
+/* DMA Channel 1 Not Bus Master During Master Or Target Abort (read-only) */
+#define PLX_INTCSR_ABNOTDMA1 BIT(26)
+/* DMA Channel N Not Bus Master During Master Or Target Abort (read-only) */
+#define PLX_INTCSR_ABNOTDMA(n) ((n) ? PLX_INTCSR_ABNOTDMA1 \
+ : PLX_INTCSR_ABNOTDMA0)
+/* Target Abort Not Generated After 256 Master Retries (read-only) */
+#define PLX_INTCSR_ABNOTRETRY BIT(27)
+/* PCI Wrote Mailbox 0 (enabled if bit 3 set) (read-only) */
+#define PLX_INTCSR_MB0IA BIT(28)
+/* PCI Wrote Mailbox 1 (enabled if bit 3 set) (read-only) */
+#define PLX_INTCSR_MB1IA BIT(29)
+/* PCI Wrote Mailbox 2 (enabled if bit 3 set) (read-only) */
+#define PLX_INTCSR_MB2IA BIT(30)
+/* PCI Wrote Mailbox 3 (enabled if bit 3 set) (read-only) */
+#define PLX_INTCSR_MB3IA BIT(31)
+/* PCI Wrote Mailbox N (N <= 3) (enabled if bit 3 set) (read-only) */
+#define PLX_INTCSR_MBIA(n) BIT(28 + (n))
/*
* Serial EEPROM Control, PCI Command Codes, User I/O Control,
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 5a4464e..b472427 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -1316,7 +1316,8 @@ static int rtd_auto_attach(struct comedi_device *dev,
devpriv->fifosz = ret;
if (dev->irq)
- writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + PLX_REG_INTCSR);
+ writel(PLX_INTCSR_PIEN | PLX_INTCSR_PLIEN,
+ devpriv->lcfg + PLX_REG_INTCSR);
return 0;
}
--
2.8.1