[GIT PULL] TTY/Serial Update for 4.7-rc1

From: Greg KH
Date: Fri May 20 2016 - 23:30:40 EST

Next message: Greg KH: "[GIT PULL] char/misc driver update for 4.7-rc1"
Previous message: Greg KH: "[GIT PULL] USB driver update for 4.7-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

----------------
Note, you will get a merge error in include/uapi/linux/serial_core.h
when merging to your tree, just resolve it so that there is a unique
number for each serial driver and all should be fine.
----------------

The following changes since commit 44549e8f5eea4e0a41b487b63e616cb089922b99:

Linux 4.6-rc7 (2016-05-08 14:38:32 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.7-rc1

for you to fetch changes up to d20bb59af64667a16f2468b54fc0adb2f824a3b6:

MAINTAINERS: 8250: remove website reference (2016-05-09 13:09:27 +0200)

----------------------------------------------------------------
TTY and Serial driver update for 4.7-rc1

Here's the large TTY and Serial driver update for 4.7-rc1.

A few new serial drivers are added here, and Peter has fixed a bunch of
long-standing bugs in the tty layer and serial drivers as normal. Full
details in the shortlog.

All of these have been in linux-next for a while with no reported issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

----------------------------------------------------------------
Alexandre Belloni (1):
tty/serial: atmel: fix hardware handshake selection

Andreas Färber (1):
tty: serial: meson: Implement earlycon support

Andy Shevchenko (5):
serial: 8250_mid: use proper bar for DNV platform
serial: 8250_mid: recognize interrupt source in handler
serial: 8250_mid: include missed linux/bitops.h
serial: 8250_mid: make module available only on X86
serial: 8250_mid: correct comment regarding Tangier HSU

Baruch Siach (2):
serial: imx: support RS-485 Rx disable on Tx
MAINTAINERS: 8250: remove website reference

Brian Bloniarz (1):
Fix OpenSSH pty regression on close

Chanwoo Choi (1):
serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()

Christopher Covington (1):
tty: amba-pl011: Use 32-bit accesses for SBSA UART

Dan Carpenter (1):
tty: hvc_console: silence unintialized variable warning

David Müller (1):
serial: 8250_pci: fix divide error bug if baud rate is 0

Geert Uytterhoeven (9):
serial: Make SERIAL_MVEBU_UART depend on ARCH_MVEBU
serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
serial: Move Marvell UART DT bindings to correct location
doc: DT: Add Generic Serial Device Tree Bindings
serial: imx: Use generic uart-has-rtscts DT property
serial: mxs-auart: Use generic uart-has-rtscts DT property
serial: sirf: Introduce helper variable struct device_node *np
serial: sirf: Use generic uart-has-rtscts DT property
serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios

Greg Kroah-Hartman (1):
Merge 4.6-rc7 into tty-next

Jiri Slaby (8):
TTY: n_gsm, fix false positive WARN_ON
tty: vt, remove reduntant check
tty: vt, get rid of weird source code flow
tty: vt, make color_table const
tty: vt, use proper type for default colors
TTY: serial/ifx6x60, initialize more
tty: vt, return error when con_startup fails
tty: vt, finish looping on duplicate

Julia Lawall (2):
serial: mvebu-uart: fix platform_no_drv_owner.cocci warnings
TTY: add __init attribute

Kefeng Wang (1):
serial: 8250_dw: fix wrong logic in dw8250_check_lcr()

Maarten Brock (1):
serial-uartlite: Constify uartlite_be/uartlite_le

Masahiro Yamada (1):
serial: 8250_uniphier: add "\n" at the end of error log

Matthias Schiffer (1):
MIPS: ath79: make bootconsole wait for both THRE and TEMT

Oleksij Rempel (1):
serial: mxs-auart: add Alphascale ASM9260 support

Paul Gortmaker (1):
drivers/tty: make serial/mvebu-uart.c explicitly non-modular

Peter Hurley (27):
tty: Replace TTY_IO_ERROR bit tests with tty_io_error()
tty: Replace TTY_THROTTLED bit tests with tty_throttled()
tty: Define ASYNC_ replacement bits
tty: Replace ASYNC_CTS_FLOW bit and update atomically
tty: Replace ASYNC_NORMAL_ACTIVE bit and update atomically
tty: Replace ASYNC_CHECK_CD and update atomically
tty: Replace ASYNC_SUSPENDED bit and update atomically
tty: Replace ASYNC_INITIALIZED bit and update atomically
tty: mxser: Remove unused ASYNC_SHARE_IRQ flag
tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags
serial: core: Expand port mutex section in uart_poll_init()
serial: core: Prevent unsafe uart port access, part 1
serial: core: Prevent unsafe uart port access, part 2
serial: core: Prevent unsafe uart port access, part 3
tty: Remove unused TTY_NUMBER() macro
tty: Remove stale parameter comment
serial: 8250: Eliminate needless local in irq handlers
serial: 8250: Reduce expr in 8250 irq handler
serial: omap8250: Eliminate local in omap8250_runtime_resume()
serial: 8250: Remove unused define
serial: 8250: Validate dmaengine rx chan meets requirements
serial: 8250: Validate dmaengine tx chan meets requirements
serial: omap8250: Drop rx buffer sync
serial: omap8250: Simplify rx dma completion interface
serial: 8250: Extract IIR logic steering from rx dma
serial: omap8250: Terminate rx dma only for flushes
serial: core: Fix port mutex assert if lockdep disabled

Ricardo Ribalda Delgado (1):
serial: 8250: Integrate Fintek into 8250_base

Srinivas Kandagatla (1):
tty: msm_serial: remove static clk rate setting in probe

Stephen Boyd (1):
tty: serial: msm: Support more bauds

Sudip Mukherjee (2):
tty: ipwireless: fix possible NULL dereference
tty: synclink: remove unneeded test

Thierry Reding (2):
serial: tegra: Remove unused variable
serial: 8250: of: Make tegra_serial_handle_break() static

Uwe Kleine-König (6):
serial: imx: fix polarity of RI
serial: imx: let irq handler return IRQ_NONE if no event was handled
serial: imx: make sure unhandled irqs are disabled
serial: imx: only count 0->1 transitions for RNG
serial: imx: reorder functions to simplify next patch
serial: imx: implement DSR irq handling for DTE mode

Vladimir Murzin (3):
dt-bindings: document the MPS2 UART bindings
serial: mps2-uart: add MPS2 UART driver
serial: mps2-uart: add support for early console

Wan Ahmad Zainie (2):
serial: 8250: export get_mctrl function
serial: 8250_pci: report DCD and DSR signals as active for Bay Trail

Wang Hongcheng (1):
serial: 8250dw: Add device HID for future AMD UART controller

Wills Wang (1):
sc16is7xx: remove useless "uart_handle_cts_change"

Yegor Yefremov (1):
serial: mctrl_gpio: add IRQ locking

Zhao Qiang (1):
QE-UART: add "fsl,t1040-ucc-uart" to of_device_id

.../devicetree/bindings/serial/arm,mps2-uart.txt | 19 +
.../devicetree/bindings/serial/fsl-imx-uart.txt | 4 +-
.../devicetree/bindings/serial/fsl-mxs-auart.txt | 16 +-
.../bindings/{tty => }/serial/mvebu-uart.txt | 0
.../devicetree/bindings/serial/serial.txt | 57 ++
.../devicetree/bindings/serial/sirf-uart.txt | 8 +-
Documentation/kernel-parameters.txt | 6 +
Documentation/serial/tty.txt | 3 -
MAINTAINERS | 1 -
arch/ia64/hp/sim/simserial.c | 2 +-
arch/mips/ath79/early_printk.c | 6 +-
drivers/char/pcmcia/synclink_cs.c | 29 +-
drivers/ipack/devices/ipoctal.c | 5 +-
drivers/isdn/i4l/isdn_tty.c | 44 +-
drivers/mmc/card/sdio_uart.c | 2 +-
drivers/net/usb/hso.c | 2 +-
drivers/s390/char/con3215.c | 22 +-
drivers/s390/char/tty3270.c | 4 +-
drivers/staging/dgnc/dgnc_tty.c | 2 +-
drivers/staging/fwserial/fwserial.c | 2 +-
drivers/staging/speakup/selection.c | 2 +-
drivers/tty/amiserial.c | 39 +-
drivers/tty/cyclades.c | 38 +-
drivers/tty/hvc/hvc_console.c | 4 +-
drivers/tty/hvc/hvcs.c | 2 +-
drivers/tty/hvc/hvsi.c | 2 +-
drivers/tty/ipwireless/hardware.c | 5 +
drivers/tty/isicom.c | 19 +-
drivers/tty/moxa.c | 12 +-
drivers/tty/mxser.c | 35 +-
drivers/tty/n_gsm.c | 12 +-
drivers/tty/n_hdlc.c | 4 +-
drivers/tty/n_tty.c | 70 ++-
drivers/tty/nozomi.c | 2 +-
drivers/tty/pty.c | 6 +-
drivers/tty/rocket.c | 16 +-
drivers/tty/serial/8250/8250.h | 15 +-
drivers/tty/serial/8250/8250_core.c | 3 +
drivers/tty/serial/8250/8250_dma.c | 68 ++-
drivers/tty/serial/8250/8250_dw.c | 8 +-
drivers/tty/serial/8250/8250_fintek.c | 118 +---
drivers/tty/serial/8250/8250_mid.c | 44 +-
drivers/tty/serial/8250/8250_of.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 93 ++-
drivers/tty/serial/8250/8250_pci.c | 15 +
drivers/tty/serial/8250/8250_port.c | 38 +-
drivers/tty/serial/8250/8250_uniphier.c | 2 +-
drivers/tty/serial/8250/Kconfig | 24 +-
drivers/tty/serial/8250/Makefile | 2 +-
drivers/tty/serial/Kconfig | 20 +-
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/amba-pl011.c | 1 +
drivers/tty/serial/atmel_serial.c | 14 +-
drivers/tty/serial/crisv10.c | 30 +-
drivers/tty/serial/ifx6x60.c | 2 +-
drivers/tty/serial/imx.c | 174 ++++--
drivers/tty/serial/meson_uart.c | 42 +-
drivers/tty/serial/mps2-uart.c | 625 ++++++++++++++++++++
drivers/tty/serial/msm_serial.c | 101 ++--
drivers/tty/serial/mvebu-uart.c | 29 +-
drivers/tty/serial/mxs-auart.c | 644 +++++++++++++++++----
drivers/tty/serial/samsung.c | 4 +-
drivers/tty/serial/sc16is7xx.c | 13 +-
drivers/tty/serial/serial-tegra.c | 2 -
drivers/tty/serial/serial_core.c | 430 +++++++++-----
drivers/tty/serial/serial_mctrl_gpio.c | 7 +-
drivers/tty/serial/serial_mctrl_gpio.h | 6 +-
drivers/tty/serial/sirfsoc_uart.c | 39 +-
drivers/tty/serial/uartlite.c | 12 +-
drivers/tty/serial/ucc_uart.c | 3 +
drivers/tty/synclink.c | 74 +--
drivers/tty/synclink_gt.c | 41 +-
drivers/tty/synclinkmp.c | 41 +-
drivers/tty/tty_buffer.c | 34 +-
drivers/tty/tty_io.c | 9 +-
drivers/tty/tty_ioctl.c | 4 +-
drivers/tty/tty_port.c | 27 +-
drivers/tty/vt/selection.c | 2 +-
drivers/tty/vt/vt.c | 115 ++--
drivers/usb/class/cdc-acm.c | 4 +-
drivers/usb/gadget/function/u_serial.c | 4 +-
drivers/usb/misc/sisusbvga/sisusb_con.c | 2 +-
drivers/usb/serial/console.c | 4 +-
drivers/usb/serial/digi_acceleport.c | 3 +-
drivers/usb/serial/generic.c | 6 +-
drivers/usb/serial/mxuport.c | 6 +-
drivers/usb/serial/sierra.c | 4 +-
drivers/usb/serial/usb-serial.c | 2 +-
drivers/usb/serial/usb_wwan.c | 4 +-
drivers/video/console/fbcon.c | 4 +-
drivers/video/console/mdacon.c | 2 +-
drivers/video/console/newport_con.c | 2 +-
drivers/video/console/sticon.c | 2 +-
drivers/video/console/vgacon.c | 5 +-
include/linux/console.h | 2 +-
include/linux/selection.h | 8 +-
include/linux/serial_8250.h | 2 +
include/linux/serial_core.h | 3 +
include/linux/tty.h | 89 ++-
include/uapi/linux/serial_core.h | 3 +
include/uapi/linux/tty_flags.h | 13 +-
include/uapi/linux/vt.h | 1 -
net/irda/ircomm/ircomm_tty.c | 31 +-
net/irda/ircomm/ircomm_tty_attach.c | 2 +-
net/irda/ircomm/ircomm_tty_ioctl.c | 18 +-
105 files changed, 2530 insertions(+), 1176 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
rename Documentation/devicetree/bindings/{tty => }/serial/mvebu-uart.txt (100%)
create mode 100644 Documentation/devicetree/bindings/serial/serial.txt
create mode 100644 drivers/tty/serial/mps2-uart.c

Next message: Greg KH: "[GIT PULL] char/misc driver update for 4.7-rc1"
Previous message: Greg KH: "[GIT PULL] USB driver update for 4.7-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]