[PATCH 4/6] Documentation: bindings: add dt documentation for cdn DP controller
From: Chris Zhong
Date: Fri May 27 2016 - 02:04:09 EST
This patch adds a binding that describes the cdn DP controller for
rk3399.
Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
---
.../bindings/display/rockchip/cdn-dp-rockchip.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 0000000..60795c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,57 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+ Required elements: "core_clk" "pclk" "spdif"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+-------------------------------------------------------------------------------
+
+Example:
+ cdn_dp: dp@fec00000 {
+ compatible = "rockchip,cdn-dp";
+ reg = <0x0 0xfec00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+ <&cru SCLK_SPDIF_REC_DPTX>;
+ clock-names = "core_clk", "pclk", "spdif";
+ phys = <&tcphy0>;
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dp>;
+ };
+
+ dp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dp>;
+ };
+ };
+ };
+ };
--
2.6.3