Re: [PATCH 2/6] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY

[Chris Zhong]

Hi Heiko

On 05/27/2016 04:29 PM, Heiko Stuebner wrote:
> Hi Chris,
>
> Am Freitag, 27. Mai 2016, 14:02:15 schrieb Chris Zhong:
> > This patch adds a binding that describes the Rockchip USB Type-C PHY
> > for rk3399.
> >
> > Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> > ---
> >
> >   .../devicetree/bindings/phy/phy-rockchip-typec.txt | 55
> > ++++++++++++++++++++++ 1 file changed, 55 insertions(+)
> >   create mode 100644
> > Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> >
> > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> > b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt new file
> > mode 100644
> > index 0000000..402f667
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> > @@ -0,0 +1,55 @@
> > +ROCKCHIP type-c PHY
> > +
> > +Required properties:
> > + - compatible: should be "rockchip,rk3399-typec-phy"
> > + - reg : Address and length of the usb phy control register set
> > + - rockchip,grf : phandle to the syscon managing the "general
> > +   register files"
> > + - clocks : phandle + clock specifier for the phy clocks
> > + - clock-names: string, clock name, must be "tcpdcore", "tcpdphy_ref";
> > + - resets : a list of phandle + reset specifier pairs
> > + - reset-names : string reset name, must be:
> > +		 "tcphy_rst", "tcphy_pipe_rst", "uphy_tcphy_rst"
> > + - #phy-cells: Must be 0.  See ./phy-bindings.txt for details.
> > + - rockchip,usb3phy*: phy registers embed in grf
> > +
> > +Example:
> > +	tcphy0: phy@ff7c0000 {
> > +		compatible = "rockchip,rk3399-typec-phy";
> > +		reg = <0x0 0xff7c0000 0x0 0x40000>;
> > +		#phy-cells = <0>;
> > +		rockchip,grf = <&grf>;
> > +		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> > +			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
> > +		clock-names = "tcpdcore", "tcpdphy_ref";
> > +		resets = <&cru SRST_UPHY0>,
> > +			 <&cru SRST_UPHY0_PIPE_L00>,
> > +			 <&cru SRST_P_UPHY0_TCPHY>;
> > +		reset-names = "tcphy_rst", "tcphy_pipe_rst", "uphy_tcphy_rst";
> > +		rockchip,usb3phy_con0 = <0x0e580 0 16>;
> > +		rockchip,usb3phy_con1 = <0x0e584 0 16>;
> > +		rockchip,usb3phy_con2 = <0x0e588 0 16>;
> > +		rockchip,usb3phy_status0 = <0x0e5c0 0 13>;
> > +		rockchip,usb3phy_status1 = <0x0e5c4 0 12>;
> please embedded this register data in the driver instead (not in the
> devicetree), matched against the compatible value.
> See Frank's usb2phy driver for reference if needed.
Okay, I will move them to driver file next version, Thanks.
> Thanks
> Heiko