[PATCH v3 1/5] dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smi

From: honghui.zhang
Date: Fri May 27 2016 - 04:57:59 EST

From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>

This patch defines the local arbitor port IDs for mediatek SoC MT2701 and
add descriptions of binding for mediatek generation one iommu and smi.

Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
.../devicetree/bindings/iommu/mediatek,iommu.txt | 13 +++-
.../memory-controllers/mediatek,smi-common.txt | 21 +++++-
.../memory-controllers/mediatek,smi-larb.txt | 4 +-
include/dt-bindings/memory/mt2701-larb-port.h | 85 ++++++++++++++++++++++
4 files changed, 115 insertions(+), 8 deletions(-)
create mode 100644 include/dt-bindings/memory/mt2701-larb-port.h

diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index cd1b1cd..53c20ca 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -1,7 +1,9 @@
* Mediatek IOMMU Architecture Implementation

- Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which
-uses the ARM Short-Descriptor translation table format for address translation.
+ Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and
+this M4U have two generations of HW architecture. Generation one uses flat
+pagetable, and only supports 4K size page mapping. Generation two uses the
+ARM Short-Descriptor translation table format for address translation.

About the M4U Hardware Block Diagram, please check below:

@@ -36,7 +38,9 @@ in each larb. Take a example, There are many ports like MC, PP, VLD in the
video decode local arbiter, all these ports are according to the video HW.

Required properties:
-- compatible : must be "mediatek,mt8173-m4u".
+- compatible : must be one of the following string:
+ "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
+ "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
- reg : m4u register base and size.
- interrupts : the interrupt of m4u.
- clocks : must contain one entry for each clock-names.
@@ -46,7 +50,8 @@ Required properties:
according to the local arbiter index, like larb0, larb1, larb2...
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
Specifies the mtk_m4u_id as defined in
- dt-binding/memory/mt8173-larb-port.h.
+ dt-binding/memory/mt2701-larb-port.h for mt2701 and
+ dt-binding/memory/mt8173-larb-port.h for mt8173

iommu: iommu@10205000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index 06a83ce..aa614b2 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -2,16 +2,31 @@ SMI (Smart Multimedia Interface) Common

The hardware block diagram please check bindings/iommu/mediatek,iommu.txt

+Mediatek SMI have two generations of HW architecture, mt8173 uses the second
+generation of SMI HW while mt2701 uses the first generation HW of SMI.
+There's slight differences between the two SMI, for generation 2, the
+register which control the iommu port is at each larb's register base. But
+for generation 1, the register is at smi ao base(smi always on register
+base). Besides that, the smi async clock should be prepared and enabled for
+SMI generation 1 to transform the smi clock into emi clock domain, but that is
+not needed for SMI generation 2.
Required properties:
-- compatible : must be "mediatek,mt8173-smi-common"
+- compatible : must be one of :
+ "mediatek,mt2701-smi-common"
+ "mediatek,mt8173-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : must contain 2 entries, as follows:
+- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries
+ for generation 2 smi HW as follows:
- "apb" : Advanced Peripheral Bus clock, It's the clock for setting
the register.
- "smi" : It's the clock for transfer data and command.
- They may be the same if both source clocks are the same.
+ They may be the same if both source clocks are the same.
+ - "async" : asynchronous clock, it help transform the smi clock into the emi
+ clock domain, this clock is only needed by generation 1 smi HW.

smi_common: smi@14022000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index 55ff3b7..21277a5 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -3,7 +3,9 @@ SMI (Smart Multimedia Interface) Local Arbiter
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt

Required properties:
-- compatible : must be "mediatek,mt8173-smi-larb"
+- compatible : must be one of :
+ "mediatek,mt8173-smi-larb"
+ "mediatek,mt2701-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
- power-domains : a phandle to the power domain of this local arbiter.
diff --git a/include/dt-bindings/memory/mt2701-larb-port.h b/include/dt-bindings/memory/mt2701-larb-port.h
new file mode 100644
index 0000000..78f6678
--- /dev/null
+++ b/include/dt-bindings/memory/mt2701-larb-port.h
@@ -0,0 +1,85 @@
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * GNU General Public License for more details.
+ */
+#ifndef _MT2701_LARB_PORT_H_
+#define _MT2701_LARB_PORT_H_
+ * Mediatek m4u generation 1 such as mt2701 has flat m4u port numbers,
+ * the first port's id for larb[N] would be the last port's id of larb[N - 1]
+ * plus one while larb[0]'s first port number is 0. The definition of
+ * MT2701_M4U_ID_LARBx is following HW register spec.
+ * But m4u generation 2 like mt8173 have different port number, it use fixed
+ * offset for each larb, the first port's id for larb[N] would be (N * 32).
+ */
+#define LARB0_PORT_OFFSET 0
+#define LARB1_PORT_OFFSET 11
+#define LARB2_PORT_OFFSET 21
+#define LARB3_PORT_OFFSET 43
+#define MT2701_M4U_ID_LARB0(port) ((port) + LARB0_PORT_OFFSET)
+#define MT2701_M4U_ID_LARB1(port) ((port) + LARB1_PORT_OFFSET)
+#define MT2701_M4U_ID_LARB2(port) ((port) + LARB2_PORT_OFFSET)
+/* Port define for larb0 */
+#define MT2701_M4U_PORT_DISP_OVL_0 MT2701_M4U_ID_LARB0(0)
+#define MT2701_M4U_PORT_DISP_RDMA1 MT2701_M4U_ID_LARB0(1)
+#define MT2701_M4U_PORT_DISP_RDMA MT2701_M4U_ID_LARB0(2)
+#define MT2701_M4U_PORT_DISP_WDMA MT2701_M4U_ID_LARB0(3)
+#define MT2701_M4U_PORT_MM_CMDQ MT2701_M4U_ID_LARB0(4)
+#define MT2701_M4U_PORT_MDP_RDMA MT2701_M4U_ID_LARB0(5)
+#define MT2701_M4U_PORT_MDP_WDMA MT2701_M4U_ID_LARB0(6)
+#define MT2701_M4U_PORT_MDP_ROTO MT2701_M4U_ID_LARB0(7)
+#define MT2701_M4U_PORT_MDP_ROTCO MT2701_M4U_ID_LARB0(8)
+#define MT2701_M4U_PORT_MDP_ROTVO MT2701_M4U_ID_LARB0(9)
+#define MT2701_M4U_PORT_MDP_RDMA1 MT2701_M4U_ID_LARB0(10)
+/* Port define for larb1 */
+#define MT2701_M4U_PORT_VDEC_MC_EXT MT2701_M4U_ID_LARB1(0)
+#define MT2701_M4U_PORT_VDEC_PP_EXT MT2701_M4U_ID_LARB1(1)
+#define MT2701_M4U_PORT_VDEC_PPWRAP_EXT MT2701_M4U_ID_LARB1(2)
+#define MT2701_M4U_PORT_VDEC_AVC_MV_EXT MT2701_M4U_ID_LARB1(3)
+#define MT2701_M4U_PORT_VDEC_PRED_RD_EXT MT2701_M4U_ID_LARB1(4)
+#define MT2701_M4U_PORT_VDEC_PRED_WR_EXT MT2701_M4U_ID_LARB1(5)
+#define MT2701_M4U_PORT_VDEC_VLD_EXT MT2701_M4U_ID_LARB1(6)
+#define MT2701_M4U_PORT_VDEC_VLD2_EXT MT2701_M4U_ID_LARB1(7)
+#define MT2701_M4U_PORT_VDEC_TILE_EXT MT2701_M4U_ID_LARB1(8)
+#define MT2701_M4U_PORT_VDEC_IMG_RESZ_EXT MT2701_M4U_ID_LARB1(9)
+/* Port define for larb2 */
+#define MT2701_M4U_PORT_VENC_RCPU MT2701_M4U_ID_LARB2(0)
+#define MT2701_M4U_PORT_VENC_REC_FRM MT2701_M4U_ID_LARB2(1)
+#define MT2701_M4U_PORT_VENC_BSDMA MT2701_M4U_ID_LARB2(2)
+#define MT2701_M4U_PORT_JPGENC_RDMA MT2701_M4U_ID_LARB2(3)
+#define MT2701_M4U_PORT_VENC_LT_RCPU MT2701_M4U_ID_LARB2(4)
+#define MT2701_M4U_PORT_VENC_LT_REC_FRM MT2701_M4U_ID_LARB2(5)
+#define MT2701_M4U_PORT_VENC_LT_BSDMA MT2701_M4U_ID_LARB2(6)
+#define MT2701_M4U_PORT_JPGDEC_BSDMA MT2701_M4U_ID_LARB2(7)
+#define MT2701_M4U_PORT_VENC_SV_COMV MT2701_M4U_ID_LARB2(8)
+#define MT2701_M4U_PORT_VENC_RD_COMV MT2701_M4U_ID_LARB2(9)
+#define MT2701_M4U_PORT_JPGENC_BSDMA MT2701_M4U_ID_LARB2(10)
+#define MT2701_M4U_PORT_VENC_CUR_LUMA MT2701_M4U_ID_LARB2(11)
+#define MT2701_M4U_PORT_VENC_CUR_CHROMA MT2701_M4U_ID_LARB2(12)
+#define MT2701_M4U_PORT_VENC_REF_LUMA MT2701_M4U_ID_LARB2(13)
+#define MT2701_M4U_PORT_VENC_REF_CHROMA MT2701_M4U_ID_LARB2(14)
+#define MT2701_M4U_PORT_IMG_RESZ MT2701_M4U_ID_LARB2(15)
+#define MT2701_M4U_PORT_VENC_LT_SV_COMV MT2701_M4U_ID_LARB2(16)
+#define MT2701_M4U_PORT_VENC_LT_RD_COMV MT2701_M4U_ID_LARB2(17)
+#define MT2701_M4U_PORT_VENC_LT_CUR_LUMA MT2701_M4U_ID_LARB2(18)
+#define MT2701_M4U_PORT_VENC_LT_CUR_CHROMA MT2701_M4U_ID_LARB2(19)
+#define MT2701_M4U_PORT_VENC_LT_REF_LUMA MT2701_M4U_ID_LARB2(20)
+#define MT2701_M4U_PORT_VENC_LT_REF_CHROMA MT2701_M4U_ID_LARB2(21)
+#define MT2701_M4U_PORT_JPGDEC_WDMA MT2701_M4U_ID_LARB2(22)