[PATCH v2 1/4] staging : comedi : fix type issues in s626.c
From: Ravishankar Karkala Mallikarjunayya
Date: Sat May 28 2016 - 01:27:29 EST
This is a patch to the s626.c file that fixes up a type issues like
i.e Prefer kernel type 'u8' over 'uint8_t'
Prefer kernel type 'u16' over 'uint16_t'
Prefer kernel type 'u32' over 'uint32_t'
Prefer kernel type 's16' over 'int16_t'
Prefer kernel type 's32' over 'int32_t'
found by the checkpatch.pl tool.
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@xxxxxxxxx>
---
changes since v1: Rework
---
drivers/staging/comedi/drivers/s626.c | 212 +++++++++++++++++-----------------
1 file changed, 106 insertions(+), 106 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index c5e0863..a399d7b 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -75,24 +75,24 @@ struct s626_buffer_dma {
};
struct s626_private {
- uint8_t ai_cmd_running; /* ai_cmd is running */
+ u8 ai_cmd_running; /* ai_cmd is running */
unsigned int ai_sample_timer; /* time between samples in
* units of the timer */
int ai_convert_count; /* conversion counter */
unsigned int ai_convert_timer; /* time between conversion in
* units of the timer */
- uint16_t counter_int_enabs; /* counter interrupt enable mask
+ u16 counter_int_enabs; /* counter interrupt enable mask
* for MISC2 register */
- uint8_t adc_items; /* number of items in ADC poll list */
+ u8 adc_items; /* number of items in ADC poll list */
struct s626_buffer_dma rps_buf; /* DMA buffer used to hold ADC (RPS1)
* program */
struct s626_buffer_dma ana_buf; /* DMA buffer used to receive ADC data
* and hold DAC data */
- uint32_t *dac_wbuf; /* pointer to logical adrs of DMA buffer
+ u32 *dac_wbuf; /* pointer to logical adrs of DMA buffer
* used to hold DAC data */
- uint16_t dacpol; /* image of DAC polarity register */
- uint8_t trim_setpoint[12]; /* images of TrimDAC setpoints */
- uint32_t i2c_adrs; /* I2C device address for onboard EEPROM
+ u16 dacpol; /* image of DAC polarity register */
+ u8 trim_setpoint[12]; /* images of TrimDAC setpoints */
+ u32 i2c_adrs; /* I2C device address for onboard EEPROM
* (board rev dependent) */
};
@@ -304,10 +304,10 @@ static uint8_t s626_i2c_read(struct comedi_device *dev, uint8_t addr)
/* *********** DAC FUNCTIONS *********** */
/* TrimDac LogicalChan-to-PhysicalChan mapping table. */
-static const uint8_t s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
+static const u8 s626_trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
/* TrimDac LogicalChan-to-EepromAdrs mapping table. */
-static const uint8_t s626_trimadrs[] = {
+static const u8 s626_trimadrs[] = {
0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63
};
@@ -516,12 +516,12 @@ static int s626_send_dac(struct comedi_device *dev, uint32_t val)
* Private helper function: Write setpoint to an application DAC channel.
*/
static int s626_set_dac(struct comedi_device *dev,
- uint16_t chan, int16_t dacdata)
+ u16 chan, s16 dacdata)
{
struct s626_private *devpriv = dev->private;
- uint16_t signmask;
- uint32_t ws_image;
- uint32_t val;
+ u16 signmask;
+ u32 ws_image;
+ u32 val;
/*
* Adjust DAC data polarity and set up Polarity Control Register image.
@@ -535,7 +535,7 @@ static int s626_set_dac(struct comedi_device *dev,
}
/* Limit DAC setpoint value to valid range. */
- if ((uint16_t)dacdata > 0x1FFF)
+ if ((u16)dacdata > 0x1FFF)
dacdata = 0x1FFF;
/*
@@ -575,23 +575,23 @@ static int s626_set_dac(struct comedi_device *dev,
* (write to non-existent trimdac). */
val |= 0x00004000; /* Address the two main dual-DAC devices
* (TSL's chip select enables target device). */
- val |= ((uint32_t)(chan & 1) << 15); /* Address the DAC channel
+ val |= ((u32)(chan & 1) << 15); /* Address the DAC channel
* within the device. */
- val |= (uint32_t)dacdata; /* Include DAC setpoint data. */
+ val |= (u32)dacdata; /* Include DAC setpoint data. */
return s626_send_dac(dev, val);
}
static int s626_write_trim_dac(struct comedi_device *dev,
- uint8_t logical_chan, uint8_t dac_data)
+ u8 logical_chan, u8 dac_data)
{
struct s626_private *devpriv = dev->private;
- uint32_t chan;
+ u32 chan;
/*
* Save the new setpoint in case the application needs to read it back
* later.
*/
- devpriv->trim_setpoint[logical_chan] = (uint8_t)dac_data;
+ devpriv->trim_setpoint[logical_chan] = (u8)dac_data;
/* Map logical channel number to physical channel number. */
chan = s626_trimchan[logical_chan];
@@ -633,7 +633,7 @@ static int s626_write_trim_dac(struct comedi_device *dev,
static int s626_load_trim_dacs(struct comedi_device *dev)
{
- uint8_t i;
+ u8 i;
int ret;
/* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
@@ -686,7 +686,7 @@ static void s626_preload(struct comedi_device *dev,
static void s626_reset_cap_flags(struct comedi_device *dev,
unsigned int chan)
{
- uint16_t set;
+ u16 set;
set = S626_SET_CRB_INTRESETCMD(1);
if (chan < 3)
@@ -702,12 +702,12 @@ static void s626_reset_cap_flags(struct comedi_device *dev,
* Return counter setup in a format (COUNTER_SETUP) that is consistent
* for both A and B counters.
*/
-static uint16_t s626_get_mode_a(struct comedi_device *dev,
- unsigned int chan)
+static u16 s626_get_mode_a(struct comedi_device *dev,
+ unsigned int chan)
{
- uint16_t cra;
- uint16_t crb;
- uint16_t setup;
+ u16 cra;
+ u16 crb;
+ u16 setup;
unsigned cntsrc, clkmult, clkpol, encmode;
/* Fetch CRA and CRB register images. */
@@ -757,12 +757,12 @@ static uint16_t s626_get_mode_a(struct comedi_device *dev,
return setup;
}
-static uint16_t s626_get_mode_b(struct comedi_device *dev,
- unsigned int chan)
+static u16 s626_get_mode_b(struct comedi_device *dev,
+ unsigned int chan)
{
- uint16_t cra;
- uint16_t crb;
- uint16_t setup;
+ u16 cra;
+ u16 crb;
+ u16 setup;
unsigned cntsrc, clkmult, clkpol, encmode;
/* Fetch CRA and CRB register images. */
@@ -832,12 +832,12 @@ static uint16_t s626_get_mode(struct comedi_device *dev,
* ClkPol, ClkEnab, IndexSrc, IndexPol, LoadSrc.
*/
static void s626_set_mode_a(struct comedi_device *dev,
- unsigned int chan, uint16_t setup,
- uint16_t disable_int_src)
+ unsigned int chan, u16 setup,
+ u16 disable_int_src)
{
struct s626_private *devpriv = dev->private;
- uint16_t cra;
- uint16_t crb;
+ u16 cra;
+ u16 crb;
unsigned cntsrc, clkmult, clkpol;
/* Initialize CRA and CRB images. */
@@ -910,12 +910,12 @@ static void s626_set_mode_a(struct comedi_device *dev,
}
static void s626_set_mode_b(struct comedi_device *dev,
- unsigned int chan, uint16_t setup,
- uint16_t disable_int_src)
+ unsigned int chan, u16 setup,
+ u16 disable_int_src)
{
struct s626_private *devpriv = dev->private;
- uint16_t cra;
- uint16_t crb;
+ u16 cra;
+ u16 crb;
unsigned cntsrc, clkmult, clkpol;
/* Initialize CRA and CRB images. */
@@ -996,7 +996,7 @@ static void s626_set_mode_b(struct comedi_device *dev,
static void s626_set_mode(struct comedi_device *dev,
unsigned int chan,
- uint16_t setup, uint16_t disable_int_src)
+ u16 setup, u16 disable_int_src)
{
if (chan < 3)
s626_set_mode_a(dev, chan, setup, disable_int_src);
@@ -1024,10 +1024,10 @@ static void s626_set_enable(struct comedi_device *dev,
}
#ifdef unused
-static uint16_t s626_get_enable(struct comedi_device *dev,
- unsigned int chan)
+static u16 s626_get_enable(struct comedi_device *dev,
+ unsigned int chan)
{
- uint16_t crb = s626_debi_read(dev, S626_LP_CRB(chan));
+ u16 crb = s626_debi_read(dev, S626_LP_CRB(chan));
return (chan < 3) ? S626_GET_CRB_CLKENAB_A(crb)
: S626_GET_CRB_CLKENAB_B(crb);
@@ -1035,8 +1035,8 @@ static uint16_t s626_get_enable(struct comedi_device *dev,
#endif
#ifdef unused
-static uint16_t s626_get_latch_source(struct comedi_device *dev,
- unsigned int chan)
+static u16 s626_get_latch_source(struct comedi_device *dev,
+ unsigned int chan)
{
return S626_GET_CRB_LATCHSRC(s626_debi_read(dev, S626_LP_CRB(chan)));
}
@@ -1048,11 +1048,11 @@ static uint16_t s626_get_latch_source(struct comedi_device *dev,
* 2=OverflowA (B counters only), 3=disabled.
*/
static void s626_set_load_trig(struct comedi_device *dev,
- unsigned int chan, uint16_t trig)
+ unsigned int chan, u16 trig)
{
- uint16_t reg;
- uint16_t mask;
- uint16_t set;
+ u16 reg;
+ u16 mask;
+ u16 set;
if (chan < 3) {
reg = S626_LP_CRA(chan);
@@ -1085,11 +1085,11 @@ static uint16_t s626_get_load_trig(struct comedi_device *dev,
* 2=IndexOnly, 3=IndexAndOverflow.
*/
static void s626_set_int_src(struct comedi_device *dev,
- unsigned int chan, uint16_t int_source)
+ unsigned int chan, u16 int_source)
{
struct s626_private *devpriv = dev->private;
- uint16_t cra_reg = S626_LP_CRA(chan);
- uint16_t crb_reg = S626_LP_CRB(chan);
+ u16 cra_reg = S626_LP_CRA(chan);
+ u16 crb_reg = S626_LP_CRB(chan);
if (chan < 3) {
/* Reset any pending counter overflow or index captures */
@@ -1101,7 +1101,7 @@ static void s626_set_int_src(struct comedi_device *dev,
s626_debi_replace(dev, cra_reg, ~S626_CRAMSK_INTSRC_A,
S626_SET_CRA_INTSRC_A(int_source));
} else {
- uint16_t crb;
+ u16 crb;
/* Cache writeable CRB register image */
crb = s626_debi_read(dev, crb_reg);
@@ -1156,9 +1156,9 @@ static uint16_t s626_get_int_src(struct comedi_device *dev,
* Return/set the clock multiplier.
*/
static void s626_set_clk_mult(struct comedi_device *dev,
- unsigned int chan, uint16_t value)
+ unsigned int chan, u16 value)
{
- uint16_t mode;
+ u16 mode;
mode = s626_get_mode(dev, chan);
mode &= ~S626_STDMSK_CLKMULT;
@@ -1171,9 +1171,9 @@ static void s626_set_clk_mult(struct comedi_device *dev,
* Return/set the clock polarity.
*/
static void s626_set_clk_pol(struct comedi_device *dev,
- unsigned int chan, uint16_t value)
+ unsigned int chan, u16 value)
{
- uint16_t mode;
+ u16 mode;
mode = s626_get_mode(dev, chan);
mode &= ~S626_STDMSK_CLKPOL;
@@ -1186,9 +1186,9 @@ static void s626_set_clk_pol(struct comedi_device *dev,
* Return/set the encoder mode.
*/
static void s626_set_enc_mode(struct comedi_device *dev,
- unsigned int chan, uint16_t value)
+ unsigned int chan, u16 value)
{
- uint16_t mode;
+ u16 mode;
mode = s626_get_mode(dev, chan);
mode &= ~S626_STDMSK_ENCMODE;
@@ -1207,9 +1207,9 @@ static uint16_t s626_get_index_pol(struct comedi_device *dev,
* Return/set the index source.
*/
static void s626_set_index_src(struct comedi_device *dev,
- unsigned int chan, uint16_t value)
+ unsigned int chan, u16 value)
{
- uint16_t mode;
+ u16 mode;
mode = s626_get_mode(dev, chan);
mode &= ~S626_STDMSK_INDXSRC;
@@ -1232,7 +1232,7 @@ static void s626_pulse_index(struct comedi_device *dev,
unsigned int chan)
{
if (chan < 3) {
- uint16_t cra;
+ u16 cra;
cra = s626_debi_read(dev, S626_LP_CRA(chan));
@@ -1241,7 +1241,7 @@ static void s626_pulse_index(struct comedi_device *dev,
(cra ^ S626_CRAMSK_INDXPOL_A));
s626_debi_write(dev, S626_LP_CRA(chan), cra);
} else {
- uint16_t crb;
+ u16 crb;
crb = s626_debi_read(dev, S626_LP_CRB(chan));
crb &= ~S626_CRBMSK_INTCTRL;
@@ -1309,7 +1309,7 @@ static int s626_dio_clear_irq(struct comedi_device *dev)
}
static void s626_handle_dio_interrupt(struct comedi_device *dev,
- uint16_t irqbit, uint8_t group)
+ u16 irqbit, u8 group)
{
struct s626_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
@@ -1357,8 +1357,8 @@ static void s626_handle_dio_interrupt(struct comedi_device *dev,
static void s626_check_dio_interrupts(struct comedi_device *dev)
{
- uint16_t irqbit;
- uint8_t group;
+ u16 irqbit;
+ u8 group;
for (group = 0; group < S626_DIO_BANKS; group++) {
/* read interrupt type */
@@ -1378,7 +1378,7 @@ static void s626_check_counter_interrupts(struct comedi_device *dev)
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
- uint16_t irqbit;
+ u16 irqbit;
/* read interrupt type */
irqbit = s626_debi_read(dev, S626_LP_RDMISC2);
@@ -1443,7 +1443,7 @@ static bool s626_handle_eos_interrupt(struct comedi_device *dev)
* first uint16_t in the buffer because it contains junk data
* from the final ADC of the previous poll list scan.
*/
- uint32_t *readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;
+ u32 *readaddr = (u32 *)devpriv->ana_buf.logical_base + 1;
int i;
/* get the data and hand it over to comedi */
@@ -1478,7 +1478,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
{
struct comedi_device *dev = d;
unsigned long flags;
- uint32_t irqtype, irqstatus;
+ u32 irqtype, irqstatus;
if (!dev->attached)
return IRQ_NONE;
@@ -1519,25 +1519,25 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
/*
* This function builds the RPS program for hardware driven acquisition.
*/
-static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
+static void s626_reset_adc(struct comedi_device *dev, u8 *ppl)
{
struct s626_private *devpriv = dev->private;
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_cmd *cmd = &s->async->cmd;
- uint32_t *rps;
- uint32_t jmp_adrs;
- uint16_t i;
- uint16_t n;
- uint32_t local_ppl;
+ u32 *rps;
+ u32 jmp_adrs;
+ u16 i;
+ u16 n;
+ u32 local_ppl;
/* Stop RPS program in case it is currently running */
s626_mc_disable(dev, S626_MC1_ERPS1, S626_P_MC1);
/* Set starting logical address to write RPS commands. */
- rps = (uint32_t *)devpriv->rps_buf.logical_base;
+ rps = (u32 *)devpriv->rps_buf.logical_base;
/* Initialize RPS instruction pointer */
- writel((uint32_t)devpriv->rps_buf.physical_base,
+ writel((u32)devpriv->rps_buf.physical_base,
dev->mmio + S626_P_RPSADDR1);
/* Construct RPS program in rps_buf DMA buffer */
@@ -1619,8 +1619,8 @@ static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
* flushes the RPS' instruction prefetch pipeline.
*/
jmp_adrs =
- (uint32_t)devpriv->rps_buf.physical_base +
- (uint32_t)((unsigned long)rps -
+ (u32)devpriv->rps_buf.physical_base +
+ (u32)((unsigned long)rps -
(unsigned long)devpriv->
rps_buf.logical_base);
for (i = 0; i < (10 * S626_RPSCLK_PER_US / 2); i++) {
@@ -1655,7 +1655,7 @@ static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
/* Transfer ADC data from FB BUFFER 1 register to DMA buffer. */
*rps++ = S626_RPS_STREG |
(S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
- *rps++ = (uint32_t)devpriv->ana_buf.physical_base +
+ *rps++ = (u32)devpriv->ana_buf.physical_base +
(devpriv->adc_items << 2);
/*
@@ -1699,7 +1699,7 @@ static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
/* Transfer final ADC data from FB BUFFER 1 register to DMA buffer. */
*rps++ = S626_RPS_STREG | (S626_BUGFIX_STREG(S626_P_FB_BUFFER1) >> 2);
- *rps++ = (uint32_t)devpriv->ana_buf.physical_base +
+ *rps++ = (u32)devpriv->ana_buf.physical_base +
(devpriv->adc_items << 2);
/* Indicate ADC scan loop is finished. */
@@ -1712,7 +1712,7 @@ static void s626_reset_adc(struct comedi_device *dev, uint8_t *ppl)
/* Restart RPS program at its beginning. */
*rps++ = S626_RPS_JUMP; /* Branch to start of RPS program. */
- *rps++ = (uint32_t)devpriv->rps_buf.physical_base;
+ *rps++ = (u32)devpriv->rps_buf.physical_base;
/* End of RPS program build */
}
@@ -1724,8 +1724,8 @@ static int s626_ai_rinsn(struct comedi_device *dev,
unsigned int *data)
{
struct s626_private *devpriv = dev->private;
- uint8_t i;
- int32_t *readaddr;
+ u8 i;
+ s32 *readaddr;
/* Trigger ADC scan loop start */
s626_mc_enable(dev, S626_MC2_ADC_RPS, S626_P_MC2);
@@ -1739,7 +1739,7 @@ static int s626_ai_rinsn(struct comedi_device *dev,
* first uint16_t in the buffer because it contains junk data from
* the final ADC of the previous poll list scan.
*/
- readaddr = (uint32_t *)devpriv->ana_buf.logical_base + 1;
+ readaddr = (u32 *)devpriv->ana_buf.logical_base + 1;
/*
* Convert ADC data to 16-bit integer values and
@@ -1772,11 +1772,11 @@ static int s626_ai_insn_read(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
- uint16_t chan = CR_CHAN(insn->chanspec);
- uint16_t range = CR_RANGE(insn->chanspec);
- uint16_t adc_spec = 0;
- uint32_t gpio_image;
- uint32_t tmp;
+ u16 chan = CR_CHAN(insn->chanspec);
+ u16 range = CR_RANGE(insn->chanspec);
+ u16 adc_spec = 0;
+ u32 gpio_image;
+ u32 tmp;
int ret;
int n;
@@ -1869,7 +1869,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
return n;
}
-static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
+static int s626_ai_load_polllist(u8 *ppl, struct comedi_cmd *cmd)
{
int n;
@@ -1935,7 +1935,7 @@ static int s626_ns_to_timer(unsigned int *nanosec, unsigned int flags)
static void s626_timer_load(struct comedi_device *dev,
unsigned int chan, int tick)
{
- uint16_t setup =
+ u16 setup =
/* Preload upon index. */
S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
/* Disable hardware index. */
@@ -1948,7 +1948,7 @@ static void s626_timer_load(struct comedi_device *dev,
S626_SET_STD_CLKMULT(S626_CLKMULT_1X) |
/* Enabled by index */
S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
- uint16_t value_latchsrc = S626_LATCHSRC_A_INDXA;
+ u16 value_latchsrc = S626_LATCHSRC_A_INDXA;
/* uint16_t enab = S626_CLKENAB_ALWAYS; */
s626_set_mode(dev, chan, setup, false);
@@ -1977,7 +1977,7 @@ static void s626_timer_load(struct comedi_device *dev,
static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct s626_private *devpriv = dev->private;
- uint8_t ppl[16];
+ u8 ppl[16];
struct comedi_cmd *cmd = &s->async->cmd;
int tick;
@@ -2212,7 +2212,7 @@ static int s626_ao_insn_write(struct comedi_device *dev,
int i;
for (i = 0; i < insn->n; i++) {
- int16_t dacdata = (int16_t)data[i];
+ s16 dacdata = (s16)data[i];
int ret;
dacdata -= (0x1fff);
@@ -2237,7 +2237,7 @@ static int s626_ao_insn_write(struct comedi_device *dev,
static void s626_dio_init(struct comedi_device *dev)
{
- uint16_t group;
+ u16 group;
/* Prepare to treat writes to WRCapSel as capture disables. */
s626_debi_write(dev, S626_LP_MISC1, S626_MISC1_NOEDCAP);
@@ -2301,7 +2301,7 @@ static int s626_enc_insn_config(struct comedi_device *dev,
struct comedi_insn *insn, unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
- uint16_t setup =
+ u16 setup =
/* Preload upon index. */
S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
/* Disable hardware index. */
@@ -2316,8 +2316,8 @@ static int s626_enc_insn_config(struct comedi_device *dev,
S626_SET_STD_CLKENAB(S626_CLKENAB_INDEX);
/* uint16_t disable_int_src = true; */
/* uint32_t Preloadvalue; //Counter initial value */
- uint16_t value_latchsrc = S626_LATCHSRC_AB_READ;
- uint16_t enab = S626_CLKENAB_ALWAYS;
+ u16 value_latchsrc = S626_LATCHSRC_AB_READ;
+ u16 enab = S626_CLKENAB_ALWAYS;
/* (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
@@ -2336,7 +2336,7 @@ static int s626_enc_insn_read(struct comedi_device *dev,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
- uint16_t cntr_latch_reg = S626_LP_CNTR(chan);
+ u16 cntr_latch_reg = S626_LP_CNTR(chan);
int i;
for (i = 0; i < insn->n; i++) {
@@ -2384,7 +2384,7 @@ static void s626_write_misc2(struct comedi_device *dev, uint16_t new_image)
static void s626_counters_init(struct comedi_device *dev)
{
int chan;
- uint16_t setup =
+ u16 setup =
/* Preload upon index. */
S626_SET_STD_LOADSRC(S626_LOADSRC_INDX) |
/* Disable hardware index. */
@@ -2453,7 +2453,7 @@ static int s626_initialize(struct comedi_device *dev)
{
struct s626_private *devpriv = dev->private;
dma_addr_t phys_buf;
- uint16_t chan;
+ u16 chan;
int i;
int ret;
@@ -2550,10 +2550,10 @@ static int s626_initialize(struct comedi_device *dev)
*/
{
struct comedi_subdevice *s = dev->read_subdev;
- uint8_t poll_list;
- uint16_t adc_data;
- uint16_t start_val;
- uint16_t index;
+ u8 poll_list;
+ u16 adc_data;
+ u16 start_val;
+ u16 index;
unsigned int data[16];
/* Create a simple polling list for analog input channel 0 */
--
1.9.1