Re: [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver

[Carlo Caione]

On 30/05/16 15:29, Neil Armstrong wrote:
> Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
> It differs from the meson6/meson8b HW, so need for a separate driver.
> The HW provides a divider capable of having a 1ms timebase thus simplifying
> the counter update.
> The restart call is not provided even if the HW is capable of triggering a
> system reset immediately because of the PSCI firmare having such functionnality.
> The watchdog is not expected to be running at boot time since there is a separate
> system-level watchdog running from the SCPI co-processor, but this case would be
> handle in a next driver update.
> 
> Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@xxxxxxxxxxxx :
> - Remove status callback, will re-introduce it later to managed the already-running use case
> - Fix registers defines indentation
> - Fix space between operators
> - Make all callbacks static functions
> - Fix bindings with missing clocks attribute
> - Do not stop/start watchdog on a timeout setup
> - Fix probe device configuration
> 
> Neil Armstrong (3):
>   watchdog: Add Meson GXBB Watchdog Driver
>   dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
>   ARM64: dts: amlogic: meson-gxbb: Add watchdog node

I'm missing [PATCH 2/3]

-- 
Carlo Caione