[PATCH] Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optional

From: Dmitry Torokhov
Date: Tue May 31 2016 - 21:30:19 EST


We should not be ignoring -EPROBE_DEFER reported by
devm_gpiod_get_optional(), but report it as any other error to the upper
layers. While we are at it simplify check for the presence of reset GPIO
and instead of using IS_ERR_OR_NULL just use boolean.

Also do not return -ENOMEM from suspend handler when the device in
bootloader mode as that does not make sense and switch to -EBUSY instead.

Reported-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 1ae65f6..f3076d9 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -930,7 +930,7 @@ static int raydium_i2c_power_on(struct raydium_data *ts)
{
int error;

- if (IS_ERR_OR_NULL(ts->reset_gpio))
+ if (!ts->reset_gpio)
return 0;

gpiod_set_value_cansleep(ts->reset_gpio, 1);
@@ -967,7 +967,7 @@ static void raydium_i2c_power_off(void *_data)
{
struct raydium_data *ts = _data;

- if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
+ if (ts->reset_gpio) {
gpiod_set_value_cansleep(ts->reset_gpio, 1);
regulator_disable(ts->vccio);
regulator_disable(ts->avdd);
@@ -1018,11 +1018,10 @@ static int raydium_i2c_probe(struct i2c_client *client,
GPIOD_OUT_LOW);
if (IS_ERR(ts->reset_gpio)) {
error = PTR_ERR(ts->reset_gpio);
- if (error != -EPROBE_DEFER) {
+ if (error != -EPROBE_DEFER)
dev_err(&client->dev,
"failed to get reset gpio: %d\n", error);
- return error;
- }
+ return error;
}

error = raydium_i2c_power_on(ts);
@@ -1138,7 +1137,7 @@ static int __maybe_unused raydium_i2c_suspend(struct device *dev)

/* Sleep is not available in BLDR recovery mode */
if (ts->boot_mode != RAYDIUM_TS_MAIN)
- return -ENOMEM;
+ return -EBUSY;

disable_irq(client->irq);

--
2.8.0.rc3.226.g39d4020


--
Dmitry