Re: [PATCH] Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optional

[Guenter Roeck]

On Tue, May 31, 2016 at 6:30 PM, Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
> We should not be ignoring -EPROBE_DEFER reported by
> devm_gpiod_get_optional(), but report it as any other error to the upper
> layers. While we are at it simplify check for the presence of reset GPIO
> and instead of using IS_ERR_OR_NULL just use boolean.
>
> Also do not return -ENOMEM from suspend handler when the device in
> bootloader mode as that does not make sense and switch to -EBUSY instead.
>
> Reported-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Reviewed-by: Guenter Roeck <groeck@xxxxxxxxxxxx>

> ---
>  drivers/input/touchscreen/raydium_i2c_ts.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
> index 1ae65f6..f3076d9 100644
> --- a/drivers/input/touchscreen/raydium_i2c_ts.c
> +++ b/drivers/input/touchscreen/raydium_i2c_ts.c
> @@ -930,7 +930,7 @@ static int raydium_i2c_power_on(struct raydium_data *ts)
>  {
>         int error;
>
> -       if (IS_ERR_OR_NULL(ts->reset_gpio))
> +       if (!ts->reset_gpio)
>                 return 0;
>
>         gpiod_set_value_cansleep(ts->reset_gpio, 1);
> @@ -967,7 +967,7 @@ static void raydium_i2c_power_off(void *_data)
>  {
>         struct raydium_data *ts = _data;
>
> -       if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
> +       if (ts->reset_gpio) {
>                 gpiod_set_value_cansleep(ts->reset_gpio, 1);
>                 regulator_disable(ts->vccio);
>                 regulator_disable(ts->avdd);
> @@ -1018,11 +1018,10 @@ static int raydium_i2c_probe(struct i2c_client *client,
>                                                  GPIOD_OUT_LOW);
>         if (IS_ERR(ts->reset_gpio)) {
>                 error = PTR_ERR(ts->reset_gpio);
> -               if (error != -EPROBE_DEFER) {
> +               if (error != -EPROBE_DEFER)
>                         dev_err(&client->dev,
>                                 "failed to get reset gpio: %d\n", error);
> -                       return error;
> -               }
> +               return error;
>         }
>
>         error = raydium_i2c_power_on(ts);
> @@ -1138,7 +1137,7 @@ static int __maybe_unused raydium_i2c_suspend(struct device *dev)
>
>         /* Sleep is not available in BLDR recovery mode */
>         if (ts->boot_mode != RAYDIUM_TS_MAIN)
> -               return -ENOMEM;
> +               return -EBUSY;
>
>         disable_irq(client->irq);
>
> --
> 2.8.0.rc3.226.g39d4020
>
>
> --
> Dmitry