[PATCH v3 0/2] Add support for SYSCON reset

From: Andrew F. Davis
Date: Wed Jun 01 2016 - 14:42:23 EST

Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.

Changes from v2:
- Rebased on v4.7-rc1
- Removed the need to give reset specifier nodes an index address

Changes from v1:
- Reset control information is now described in the reset node, this
keeps the reset information centralized for easy verification
- Other small fixups

Andrew F. Davis (2):
Documentation: dt: reset: Add syscon reset binding
reset: add a SYSCON based reset driver

.../devicetree/bindings/reset/syscon-reset.txt | 105 ++++++++
drivers/reset/Kconfig | 10 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-syscon.c | 289 +++++++++++++++++++++
include/dt-bindings/reset/syscon.h | 23 ++
5 files changed, 428 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
create mode 100644 drivers/reset/reset-syscon.c
create mode 100644 include/dt-bindings/reset/syscon.h