[PATCH 4/5] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver

From: LABBE Corentin
Date: Fri Jun 03 2016 - 05:58:29 EST


The sun8i-emac is an ethernet MAC hardware that support 10/100/1000
speed.

This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree.
The SoC H3 have an internal PHY, so optionals syscon and ephy are set.

Signed-off-by: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 4a4926b..f5a95ff 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -626,6 +626,20 @@
status = "disabled";
};

+ emac: ethernet@1c30000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ reg = <0x01c30000 0x104>, <0x01c00030 0x4>;
+ reg-names = "emac", "syscon";
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ahb_rst 17>, <&ahb_rst 66>;
+ reset-names = "ahb", "ephy";
+ clocks = <&bus_gates 17>, <&bus_gates 128>;
+ clock-names = "ahb", "ephy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
--
2.7.3