[PATCH v3 RESEND 6/7] Binding:PHY: Binding doc for NS2 PCIe PHYs.

[Pramod Kumar]

Binding doc for NS2 PCIe PHYs.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx>
Signed-off-by: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>
---
 .../bindings/phy/brcm,mdio-mux-bus-pci.txt         | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt

diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
new file mode 100644
index 0000000..5b51007
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
@@ -0,0 +1,27 @@
+* Broadcom NS2 PCIe PHY binding document
+
+Required bus properties:
+- reg: MDIO Bus number for the MDIO interface
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Required PHY properties:
+- compatible: should be "brcm,ns2-pcie-phy"
+- reg: MDIO Phy ID for the MDIO interface
+- #phy-cells: must be 0
+
+This is a child bus node of "brcm,mdio-mux-iproc" node.
+
+Example:
+
+mdio@0 {
+	reg = <0x0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pci_phy0: pci-phy@0 {
+		compatible = "brcm,ns2-pcie-phy";
+		reg = <0x0>;
+		#phy-cells = <0>;
+	};
+};
-- 
1.9.1