Re: dma_declare_coherent_memory fails for RAM allocated memory
From: Ivaylo Dimitrov
Date: Sat Jun 04 2016 - 16:15:10 EST
On 2.06.2016 20:14, Ivaylo Dimitrov wrote:
Hi,
On 1.06.2016 14:18, Brian Starkey wrote:
Hi Ivo,
On Sun, May 29, 2016 at 05:56:02PM +0300, Ivaylo Dimitrov wrote:
Hi,
When trying to declare and use DT reserved memory region on ARM
(OMAP3), dma_declare_coherent_memory() fails in memremap(). This is
from today's master:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/memremap.c:111 memremap+0x118/0x194
memremap attempted on ram 0x8f800000 size: 0x700000
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.6.0+ #15
Hardware name: Nokia RX-51 board
[<c010bc30>] (unwind_backtrace) from [<c0109f70>] (show_stack+0x10/0x14)
[<c0109f70>] (show_stack) from [<c0126d80>] (__warn+0xcc/0xf8)
[<c0126d80>] (__warn) from [<c0126e40>] (warn_slowpath_fmt+0x34/0x44)
[<c0126e40>] (warn_slowpath_fmt) from [<c019c8d4>]
(memremap+0x118/0x194)
[<c019c8d4>] (memremap) from [<c03b88fc>]
(dma_init_coherent_memory+0x48/0x104)
[<c03b88fc>] (dma_init_coherent_memory) from [<c03b89e4>]
(dma_declare_coherent_memory+0x2c/0x68)
[<c03b89e4>] (dma_declare_coherent_memory) from [<c0115c0c>]
(rmem_omapfb_device_init+0x34/0x64)
[<c0115c0c>] (rmem_omapfb_device_init) from [<c045b0f8>]
(of_reserved_mem_device_init+0x94/0xd8)
[<c045b0f8>] (of_reserved_mem_device_init) from [<c080aaf8>]
(omapdss_init_of+0xe4/0x154)
[<c080aaf8>] (omapdss_init_of) from [<c08033f4>]
(customize_machine+0x20/0x44)
[<c08033f4>] (customize_machine) from [<c01016b8>]
(do_one_initcall+0xac/0x158)
[<c01016b8>] (do_one_initcall) from [<c0800d64>]
(kernel_init_freeable+0xf8/0x1c8)
[<c0800d64>] (kernel_init_freeable) from [<c05519dc>]
(kernel_init+0x8/0x110)
[<c05519dc>] (kernel_init) from [<c0107258>] (ret_from_fork+0x14/0x3c)
---[ end trace 73a8c076df72166b ]---
omapfb: dma_declare_coherent_memory failed
The failing code looks like:
.
.
.
static int rmem_omapfb_device_init(struct reserved_mem *rmem, struct
device *dev)
{
int dma;
if (rmem->priv)
return 0;
dma = dma_declare_coherent_memory(&omap_fb_device.dev, rmem->base,
rmem->base, rmem->size,
DMA_MEMORY_MAP |
DMA_MEMORY_EXCLUSIVE);
if (!(dma & DMA_MEMORY_MAP)) {
pr_err("omapfb: dma_declare_coherent_memory failed\n");
return -ENOMEM;
}
else
rmem->priv = omap_fb_device.dev.dma_mem;
return 0;
}
static void rmem_omapfb_device_release(struct reserved_mem *rmem,
struct device *dev)
{
dma_release_declared_memory(&omap_fb_device.dev);
}
static const struct reserved_mem_ops rmem_omapfb_ops = {
.device_init = rmem_omapfb_device_init,
.device_release = rmem_omapfb_device_release,
};
static int __init rmem_omapfb_setup(struct reserved_mem *rmem)
{
rmem->ops = &rmem_omapfb_ops;
pr_info("omapfb: reserved %d bytes at %pa\n", rmem->size,
&rmem->base);
return 0;
}
RESERVEDMEM_OF_DECLARE(dss, "ti,omapfb-memsize", rmem_omapfb_setup);
It turns out that dma_init_coherent_memory calls memremap with
MEMREMAP_WC flag, which is disallowed for RAM IIUC.
Right. If you want to use a memory region as coherent DMA memory, then
that same region can't be System RAM, because System RAM is usually
mapped in a non-coherent fashion.
I quickly hacked some code to fix the issue, but as memremap API is
relatively new(esp to me), I wonder if this is the correct way to go:
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index bdf28f7..04b1687 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -5,6 +5,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/memblock.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
@@ -32,8 +33,12 @@ static bool dma_init_coherent_memory(
if (!size)
goto out;
- if (flags & DMA_MEMORY_MAP)
- mem_base = memremap(phys_addr, size, MEMREMAP_WC);
+ if (flags & DMA_MEMORY_MAP) {
+ unsigned long map_type =
memblock_is_map_memory(phys_addr) ?
+ MEMREMAP_WB :
MEMREMAP_WC;
+
+ mem_base = memremap(phys_addr, size, map_type);
+ }
else
mem_base = ioremap(phys_addr, size);
if (!mem_base)
Does the above code looks sane? How to fix the problem if not?
AFAIK dma_declare_coherent_memory() should only be used on physical
addresses which don't already have a CPU virtual mapping. Certainly
returning (potentially) cached memory as DMA coherent is asking for
trouble.
I think what you want to do is add a "no-map;" property to your
reserved-memory region in DT. That will stop the kernel from using it
as System RAM, leaving it free for your framebuffer.
I tried to use "no-map", but for some reason it doesn't allow me to
allocate more than 2MB, anything above results in:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xffff0010
R00=22222220 R01=cf901000 R02=cfaffff4 R03=e0000000
R04=0008ff80 R05=00090000 R06=00000000 R07=c096333c
R08=c0904dc0 R09=c093a23c R10=00000001 R11=c0727b3b
R12=0000ff80 R13=c093af8c R14=c082aba0 R15=ffff0010
PSR=a00001d7 N-C- A abt32
Aborted (core dumped)
I was able to track the code to memblock_isolate_range() - if I return
-ENOMEM on http://lxr.free-electrons.com/source/mm/memblock.c#L671, the
above crash does not occur(however the allocation fails as well).
Putting some printks doesn't reveal anything suspicious to me:
for 2MB:
[ 0.000000] base 8fe00000, size 200000, rgn->base 80000000, rgn->size
10000000, type->total_size 10000000
[ 0.000000] base - rbase fe00000
for 4MB:
[ 0.000000] base 8fc00000, size 400000, rgn->base 80000000, rgn->size
10000000, type->total_size 10000000
[ 0.000000] base - rbase fc00000
However, this is where my limited memblock knowledge ends, so any help
is appreciated.
It turned out I have to increase CONFIG_FORCE_MAX_ZONEORDER in order to
be able to use more than 2MB of allocated memory.
Ivo