Re: [PATCH v3 1/2] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers

[Lee Jones]

On Fri, 13 May 2016, Keerthy wrote:

> Add information for the mfd and regulator drivers.
> 
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> ---
> 
> Changes in v3:
> 
>   * Changed the example node lable to pmic from lp8733.
> 
>  Documentation/devicetree/bindings/mfd/lp873x.txt | 55 ++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
> new file mode 100644
> index 0000000..8f3ef0d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
> @@ -0,0 +1,55 @@
> +TI LP3943 MFD driver
> +
> +Required properties:
> +  - compatible: "ti,lp8732", "ti,lp8733"
> +  - reg: I2C slave address.
> +
> +For the lp873x regulator properties please refer to:
> +../bindings/regulator/lp873x.txt

What else does the LP3943 consist of apart from regulators?

> +Example:
> +
> +pmic: lp8733@60 {
> +	compatible = "ti,lp8733";
> +	reg = <0x60>;
> +
> +	regulators {
> +		lp8733_buck0: buck0 {
> +			regulator-name = "lp8733-buck0";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1400000>;
> +			regulator-min-microamp = <1500000>;
> +			regulator-max-microamp = <4000000>;
> +			regulator-ramp-delay = <10000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +
> +		lp8733_buck1: buck1 {
> +			regulator-name = "lp8733-buck1";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1400000>;
> +			regulator-min-microamp = <1500000>;
> +			regulator-max-microamp = <4000000>;
> +			regulator-ramp-delay = <10000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		lp8733_ldo0: ldo0 {
> +			regulator-name = "lp8733-ldo0";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <3000000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		lp8733_ldo1: ldo1 {
> +			regulator-name = "lp8733-ldo1";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <3000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +	};
> +};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog