Re: [lustre-devel] [PATCH 11/21] drivers: staging: lustre: Replace CURRENT_TIME with current_fs_time()

From: Andreas Dilger
Date: Fri Jun 10 2016 - 21:54:06 EST

Next message: Ed Swierk: "Re: [PATCH v5 3/4] tpm: Allow TPM chip drivers to override reported command durations"
Previous message: Scott Wood: "Re: [PATCH 2/4] soc: fsl: add GUTS driver for QorIQ platforms"
In reply to: James Simmons: "Re: [lustre-devel] [PATCH 11/21] drivers: staging: lustre: Replace CURRENT_TIME with current_fs_time()"
Next in thread: Deepa Dinamani: "[PATCH 12/21] block: rbd: Replace non inode CURRENT_TIME with current_fs_time()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Jun 10, 2016, at 6:36 PM, James Simmons <jsimmons@xxxxxxxxxxxxx> wrote:
>
>
>> CURRENT_TIME macro is not appropriate for filesystems as it
>> doesn't use the right granularity for filesystem timestamps.
>> Use current_fs_time() instead.
>>
>> This is also in preparation for the patch that transitions
>> vfs timestamps to use 64 bit time and hence make them
>> y2038 safe. As part of the effort current_fs_time() will be
>> extended to do range checks. Hence, it is necessary for all
>> file system timestamps to use current_fs_time().
>>
>> Also change format string for prints so that these are valid
>> when vfs is transitioned to use 64 bit timestamps.
>
> Acked-by: James Simmons <jsimmons@xxxxxxxxxxxxx>

Actually, Linus NAK'd the base patch so there isn't any point in this
one landing.

Cheers, Andreas

>> Signed-off-by: Deepa Dinamani <deepa.kernel@xxxxxxxxx>
>> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> Cc: lustre-devel@xxxxxxxxxxxxxxxx
>> ---
>> drivers/staging/lustre/lustre/llite/llite_lib.c | 17 +++++++++--------
>> drivers/staging/lustre/lustre/llite/namei.c | 4 ++--
>> drivers/staging/lustre/lustre/mdc/mdc_reint.c | 6 +++---
>> .../staging/lustre/lustre/obdclass/linux/linux-obdo.c | 6 +++---
>> drivers/staging/lustre/lustre/obdclass/obdo.c | 6 +++---
>> drivers/staging/lustre/lustre/osc/osc_io.c | 2 +-
>> 6 files changed, 21 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/staging/lustre/lustre/llite/llite_lib.c b/drivers/staging/lustre/lustre/llite/llite_lib.c
>> index 96c7e9f..919748f 100644
>> --- a/drivers/staging/lustre/lustre/llite/llite_lib.c
>> +++ b/drivers/staging/lustre/lustre/llite/llite_lib.c
>> @@ -1219,6 +1219,7 @@ static int ll_setattr_done_writing(struct inode *inode,
>> int ll_setattr_raw(struct dentry *dentry, struct iattr *attr, bool hsm_import)
>> {
>> struct inode *inode = d_inode(dentry);
>> + struct super_block *sb = inode->i_sb;
>> struct ll_inode_info *lli = ll_i2info(inode);
>> struct md_op_data *op_data = NULL;
>> struct md_open_data *mod = NULL;
>> @@ -1258,23 +1259,23 @@ int ll_setattr_raw(struct dentry *dentry, struct iattr *attr, bool hsm_import)
>>
>> /* We mark all of the fields "set" so MDS/OST does not re-set them */
>> if (attr->ia_valid & ATTR_CTIME) {
>> - attr->ia_ctime = CURRENT_TIME;
>> + attr->ia_ctime = current_fs_time(sb);
>> attr->ia_valid |= ATTR_CTIME_SET;
>> }
>> if (!(attr->ia_valid & ATTR_ATIME_SET) &&
>> (attr->ia_valid & ATTR_ATIME)) {
>> - attr->ia_atime = CURRENT_TIME;
>> + attr->ia_atime = current_fs_time(sb);
>> attr->ia_valid |= ATTR_ATIME_SET;
>> }
>> if (!(attr->ia_valid & ATTR_MTIME_SET) &&
>> (attr->ia_valid & ATTR_MTIME)) {
>> - attr->ia_mtime = CURRENT_TIME;
>> + attr->ia_mtime = current_fs_time(sb);
>> attr->ia_valid |= ATTR_MTIME_SET;
>> }
>>
>> if (attr->ia_valid & (ATTR_MTIME | ATTR_CTIME))
>> - CDEBUG(D_INODE, "setting mtime %lu, ctime %lu, now = %llu\n",
>> - LTIME_S(attr->ia_mtime), LTIME_S(attr->ia_ctime),
>> + CDEBUG(D_INODE, "setting mtime %llu, ctime %llu, now = %llu\n",
>> + (long long)LTIME_S(attr->ia_mtime), (long long)LTIME_S(attr->ia_ctime),
>> (s64)ktime_get_real_seconds());
>>
>> /* We always do an MDS RPC, even if we're only changing the size;
>> @@ -1564,9 +1565,9 @@ void ll_update_inode(struct inode *inode, struct lustre_md *md)
>> }
>> if (body->valid & OBD_MD_FLMTIME) {
>> if (body->mtime > LTIME_S(inode->i_mtime)) {
>> - CDEBUG(D_INODE, "setting ino %lu mtime from %lu to %llu\n",
>> - inode->i_ino, LTIME_S(inode->i_mtime),
>> - body->mtime);
>> + CDEBUG(D_INODE, "setting ino %lu mtime from %llu to %llu\n",
>> + inode->i_ino, (unsigned long long)LTIME_S(inode->i_mtime),
>> + (unsigned long long)body->mtime);
>> LTIME_S(inode->i_mtime) = body->mtime;
>> }
>> lli->lli_mtime = body->mtime;
>> diff --git a/drivers/staging/lustre/lustre/llite/namei.c b/drivers/staging/lustre/lustre/llite/namei.c
>> index 5eba0eb..48ed1ce 100644
>> --- a/drivers/staging/lustre/lustre/llite/namei.c
>> +++ b/drivers/staging/lustre/lustre/llite/namei.c
>> @@ -731,8 +731,8 @@ static void ll_update_times(struct ptlrpc_request *request,
>> LASSERT(body);
>> if (body->valid & OBD_MD_FLMTIME &&
>> body->mtime > LTIME_S(inode->i_mtime)) {
>> - CDEBUG(D_INODE, "setting fid "DFID" mtime from %lu to %llu\n",
>> - PFID(ll_inode2fid(inode)), LTIME_S(inode->i_mtime),
>> + CDEBUG(D_INODE, "setting fid "DFID" mtime from %llu to %llu\n",
>> + PFID(ll_inode2fid(inode)), (unsigned long long)LTIME_S(inode->i_mtime),
>> body->mtime);
>> LTIME_S(inode->i_mtime) = body->mtime;
>> }
>> diff --git a/drivers/staging/lustre/lustre/mdc/mdc_reint.c b/drivers/staging/lustre/lustre/mdc/mdc_reint.c
>> index 4ef3db1..9980f3a 100644
>> --- a/drivers/staging/lustre/lustre/mdc/mdc_reint.c
>> +++ b/drivers/staging/lustre/lustre/mdc/mdc_reint.c
>> @@ -143,9 +143,9 @@ int mdc_setattr(struct obd_export *exp, struct md_op_data *op_data,
>> rpc_lock = obd->u.cli.cl_rpc_lock;
>>
>> if (op_data->op_attr.ia_valid & (ATTR_MTIME | ATTR_CTIME))
>> - CDEBUG(D_INODE, "setting mtime %ld, ctime %ld\n",
>> - LTIME_S(op_data->op_attr.ia_mtime),
>> - LTIME_S(op_data->op_attr.ia_ctime));
>> + CDEBUG(D_INODE, "setting mtime %lld, ctime %lld\n",
>> + (long long)LTIME_S(op_data->op_attr.ia_mtime),
>> + (long long)LTIME_S(op_data->op_attr.ia_ctime));
>> mdc_setattr_pack(req, op_data, ea, ealen, ea2, ea2len);
>>
>> ptlrpc_request_set_replen(req);
>> diff --git a/drivers/staging/lustre/lustre/obdclass/linux/linux-obdo.c b/drivers/staging/lustre/lustre/obdclass/linux/linux-obdo.c
>> index b41b65e..ccd2b7b 100644
>> --- a/drivers/staging/lustre/lustre/obdclass/linux/linux-obdo.c
>> +++ b/drivers/staging/lustre/lustre/obdclass/linux/linux-obdo.c
>> @@ -54,9 +54,9 @@ void obdo_refresh_inode(struct inode *dst, struct obdo *src, u32 valid)
>>
>> if (valid & (OBD_MD_FLCTIME | OBD_MD_FLMTIME))
>> CDEBUG(D_INODE,
>> - "valid %#llx, cur time %lu/%lu, new %llu/%llu\n",
>> - src->o_valid, LTIME_S(dst->i_mtime),
>> - LTIME_S(dst->i_ctime), src->o_mtime, src->o_ctime);
>> + "valid %#llx, cur time %llu/%llu, new %llu/%llu\n",
>> + src->o_valid, (unsigned long long)LTIME_S(dst->i_mtime),
>> + (unsigned long long)LTIME_S(dst->i_ctime), src->o_mtime, src->o_ctime);
>>
>> if (valid & OBD_MD_FLATIME && src->o_atime > LTIME_S(dst->i_atime))
>> LTIME_S(dst->i_atime) = src->o_atime;
>> diff --git a/drivers/staging/lustre/lustre/obdclass/obdo.c b/drivers/staging/lustre/lustre/obdclass/obdo.c
>> index 748e33f..973fa4c 100644
>> --- a/drivers/staging/lustre/lustre/obdclass/obdo.c
>> +++ b/drivers/staging/lustre/lustre/obdclass/obdo.c
>> @@ -62,9 +62,9 @@ void obdo_from_inode(struct obdo *dst, struct inode *src, u32 valid)
>> u32 newvalid = 0;
>>
>> if (valid & (OBD_MD_FLCTIME | OBD_MD_FLMTIME))
>> - CDEBUG(D_INODE, "valid %x, new time %lu/%lu\n",
>> - valid, LTIME_S(src->i_mtime),
>> - LTIME_S(src->i_ctime));
>> + CDEBUG(D_INODE, "valid %x, new time %llu/%llu\n",
>> + valid, (unsigned long long)LTIME_S(src->i_mtime),
>> + (unsigned long long)LTIME_S(src->i_ctime));
>>
>> if (valid & OBD_MD_FLATIME) {
>> dst->o_atime = LTIME_S(src->i_atime);
>> diff --git a/drivers/staging/lustre/lustre/osc/osc_io.c b/drivers/staging/lustre/lustre/osc/osc_io.c
>> index d534b0e..99f69bb 100644
>> --- a/drivers/staging/lustre/lustre/osc/osc_io.c
>> +++ b/drivers/staging/lustre/lustre/osc/osc_io.c
>> @@ -221,7 +221,7 @@ static void osc_page_touch_at(const struct lu_env *env,
>> kms > loi->loi_kms ? "" : "not ", loi->loi_kms, kms,
>> loi->loi_lvb.lvb_size);
>>
>> - attr->cat_mtime = attr->cat_ctime = LTIME_S(CURRENT_TIME);
>> + attr->cat_mtime = attr->cat_ctime = ktime_get_real_seconds();
>> valid = CAT_MTIME | CAT_CTIME;
>> if (kms > loi->loi_kms) {
>> attr->cat_kms = kms;
>> --
>> 1.9.1
>>
>> _______________________________________________
>> lustre-devel mailing list
>> lustre-devel@xxxxxxxxxxxxxxxx
>> http://lists.lustre.org/listinfo.cgi/lustre-devel-lustre.org
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

Cheers, Andreas

Attachment: signature.asc
Description: Message signed with OpenPGP using GPGMail

Next message: Ed Swierk: "Re: [PATCH v5 3/4] tpm: Allow TPM chip drivers to override reported command durations"
Previous message: Scott Wood: "Re: [PATCH 2/4] soc: fsl: add GUTS driver for QorIQ platforms"
In reply to: James Simmons: "Re: [lustre-devel] [PATCH 11/21] drivers: staging: lustre: Replace CURRENT_TIME with current_fs_time()"
Next in thread: Deepa Dinamani: "[PATCH 12/21] block: rbd: Replace non inode CURRENT_TIME with current_fs_time()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]