Re: [linux-sunxi] [PATCH v3 11/13] dt: spi: sun4i: merge sun4i and sun6i binding doc

[Julian Calaby]

Hi Michal,

On Tue, Jun 14, 2016 at 2:40 PM, Michal Suchanek <hramrach@xxxxxxxxx> wrote:
> On 14 June 2016 at 01:45, Julian Calaby <julian.calaby@xxxxxxxxx> wrote:
>> Hi Michal,
>>
>> On Tue, Jun 14, 2016 at 3:46 AM, Michal Suchanek <hramrach@xxxxxxxxx> wrote:
>>> Signed-off-by: Michal Suchanek <hramrach@xxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/spi/spi-sun4i.txt          | 21 ++++++++++---------
>>>  .../devicetree/bindings/spi/spi-sun6i.txt          | 24 ----------------------
>>>  2 files changed, 11 insertions(+), 34 deletions(-)
>>>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
>>> index de827f5..329e543 100644
>>> --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt
>>> +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
>>> @@ -1,7 +1,8 @@
>>> -Allwinner A10 SPI controller
>>> +Allwinner A10/A31 SPI controller
>>>
>>>  Required properties:
>>> -- compatible: Should be "allwinner,sun4-a10-spi".
>>> +- compatible: Should be one of "allwinner,sun4i-a10-spi" and
>>> +                               "allwinner,sun6i-a31-spi"
>>>  - reg: Should contain register location and length.
>>>  - interrupts: Should contain interrupt.
>>>  - clocks: phandle to the clocks feeding the SPI controller. Two are
>>> @@ -9,16 +10,16 @@ Required properties:
>>>    - "ahb": the gated AHB parent clock
>>>    - "mod": the parent module clock
>>>  - clock-names: Must contain the clock names described just above
>>> +- resets: (sun6i only) phandle to the reset controller asserting
>>> +         this device in reset
>>>
>>>  Example:
>>>
>>> -spi1: spi@01c06000 {
>>> -       compatible = "allwinner,sun4i-a10-spi";
>>> -       reg = <0x01c06000 0x1000>;
>>> -       interrupts = <11>;
>>> -       clocks = <&ahb_gates 21>, <&spi1_clk>;
>>> +spi1: spi@01c69000 {
>>> +       compatible = "allwinner,sun6i-a31-spi";
>>> +       reg = <0x01c69000 0x1000>;
>>> +       interrupts = <0 66 4>;
>>> +       clocks = <&ahb1_gates 21>, <&spi1_clk>;
>>>         clock-names = "ahb", "mod";
>>> -       status = "disabled";
>>> -       #address-cells = <1>;
>>> -       #size-cells = <0>;
>>> +       resets = <&ahb1_rst 21>;
>>
>> Why not have an example of each type?
>
> How many binding docs have examples of all types?

I'm pretty sure that there's a few. This was only a suggestion, so if
it's not to your taste, ignore it.

> There are actual DTs using these so you can look at those as well.
>
> This driver covers 3 types of bindings which look different in the DT:
>
> sun4i IP with some Chinese interrupt controller, sun4i IP with GIC,
> and sun6i IP with GIC.

Fair point.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/